Synergy

• Specially developed for the Synergy system
• Developed by Steven Fryette
• Power: 2 x 50 W / 100 W mono
• Tube assembly: 2 x 12AX7 and 4 x 6L6
• Impedance: 4/8/16 ohms (stereo), 2/4/8 (mono)
• 2 Latch inputs
• 4 Jack outputs
• Each channel with its own volume control
• Global presence and depth control
• 2 Fan system
• Rack format
• Made in USA

• Developed by Joe Morgan
• 2 Channels
• Tubes: 2x 12AX7
• 3-Band EQ
• Separate gain and volume control

• 2 Channels
• Tubes: 2x 12AX7
• 3-Band EQ
• Separate gain and volume controls

• Based on the Dumble Overdrive Special - one of the most coveted boutique tube amplifiers
• 2 Channels
• Tubes: 2x 12AX7
• Controls: Bass, Mid, Treble, OD Level, OD Ratio, Presence, Master and Volume
• Switches: Bright, Deep, Rock/Jazz
• Dimensions (W x D x H): 17.8 x 14 x 3.8 cm
• Weight: 454 g

• Slot for a module
• 1x 12AX7 tube
• FX loop
• XLR DI output
• Modules can be swapped around as desired and thus different styles can be covered
• 2 channels (with built-in module)
• Incl. footswitch
• Made in the USA
• Module is not included
• Specially developed for the Synergy system

• Full tube
• Designed by Reinhold Bogner
• Perfect for solos and metal
• The blue channel is based on the second channel of the Bogner Uberschall
• The red channel adds additional gain
• Three-position cathode selector switch allows the input tube bias setting to be configured for optimal input gain and bass response
• 2 Channels
• Tubes: 2x 12AX7
• Separate 3-band EQ's, gain and volume controls

Synergy is a modular principle - the preamp modules are interchangeable and the amp can be thus tailored specifically to your unique sound ideas.

• Developed especially for the Synergy System
• Power: 50 W
• 2 Module slots
• 4 Channels (when 2 modules are used)
• Tube assembly: 2x 6L6, 3x 12AX7
• Controls: Presence, Density, Master Volume
• MIDI compatible
• Effects loop
• Impedance control for speaker outputs
• XLR DI output
• Dimensions: 64.1 x 25.4 x 25.4 cm
• Weight: 19.1 kg
• Includes a 4-way switch
• Made in the USA

Note: Modules are not included.

• All tube
• Designed by Steven Fryette
• Based on the Fryette / VHT Pittbull amplifier head
• 2 Channels offer a full range of clean, overdrive and high gain distortion sounds
• Controls per channel: Gain, Volume, Hi Gain & Shift Switches
• Common Treble, Middle, Bass and Presence controls
• Assignable 6-band graphic EQ

• All-tube
• Developed by Diezel - based on the Diezel VH4
• 2 Channels
• Tubes: 2x 12AX7
• Controls per channel: Gain, Bass, Mid, Treble, Volume
• Dimensions: (W x D x H): 17.8 x 14 x 3.8 cm
• Weight: 454 g

• 2 Channels
• Tubes: 2x 12AX7
• 3-Band EQ
• Separate gain and volume control

• All tube
• Designed by Horst Langer and Engl Amplification
• The blue channel is based on channel 3, the red channel on channel 4 of the Engl Powerball
• 2 x 12AX7 tubes
• 2 Channels
• Separate 3-band EQs
• Gain and volume controls
• The three-stage cathode selector switch allows you to configure the input tube bias setting for optimal input gain and bass response

• Steve Vai Signature Model
• Specially developed according to Steve's specifications
• 2 Channels
• Blue channel: delivers everything from radiantly clean to slightly distorted American sounds
• Red channel: offers a variety of Steve's typical high-gain sounds
• Tubes: 2x 12AX7
• 3-Band EQ
• Separate gain and volume control
• Dimensions (W x D x H): 178 x 140 x 38 mm
• Weight: 454 g
• Made in USA

• Based on the classic American 4x 10" Tweed Combo
• 2 Channels
• Tubes: 2x 12AX7
• Control knobs per channel: Gain Volume, Bass, Mid, Treble
• Switch on each channel: Tight and bright
• Dimensions: (W x D x H): 17.8 x 14 x 3.8 cm
• Weight: 454 g

Synergy IICP; all tube pre-amp module for Synergy Amps; custom designed by Steven Fryette; Based on the original Mark series amp with Its dual-channel design providing instant access to the legendary clean & mid saturated overdrive sounds; brite and shift switches per chanenl as well as the switchable 5-band EQ offer all the versatility this Amp is famous for; 2 x 12AX7 tubes; Controls: Lead Drive, Lead Master, Volume 1, Master 1; Shared Treble, Middle, Bass and Presence controls; Switche: Lead Brite, Lead Shift, Brite, Shift, EQ In/Out 5-Band Graphic EQ; Made in USA

• Solid tube
• Developed by Friedman
• Based on the Friedman BE-100 with more gain
• 2 Channels
• Tubes: 2x 12AX7
• 3-Band EQ
• Separate gain and volume controls

Synergy Diezel Herbert Pre-Amp; exchangeable all-tube pre-amp module for Synergy amplifiers; designed by Peter Diezel, 2 x 12AX7 tubes, 2 channels, Controls Ch.1 Gain, Ch.2 Gain, Ch.1 Volume, Ch.2 Volume, Ch.1 Mid Cut, Ch.2 Mid Cut, Bass, Mid, Treble; Dimensions: (W x D x H): 17,8 x 14 x 3,8 cm, (7" x 5,5" x 1,5"); weight: 454 g (1 lbs); Made in USA

Synergy is a modular principle - Modules can be swapped around as desired and thus different styles can be covered

• Specially developed for the Synergy system
• 2 Module slots
• 4 Channels (if 2 modules are used)
• Tubes: 1x 12AX7
• FX Loop
• XLR DI output
• MIDI compatible
• Rack format
• Made in USA

Note: Modules are not included.

• All tube
• Designed by Steven Fryette
• 2 Channels
• Full range of clean, overdrive and high gain distortion sounds
• Controls per channel: Gain I, Gain II, Volume, Bright & Amp More / Less switch
• Common controls: Treble, Middle & Bass