the box pro

• With Eighteensound Transducer made in Italy
• Power output: 2000 W
• Frequency response: 35 - 100 Hz (+- 3dB, depending on processor settings)
• Maximum level: 141 dB @ 1m
• Class D amplifier with SMPS
• Water-repellent membrane coating
• 4" Voice coil
• XLR input and output
• Power-twist input and output
• RJ45 Input and output (EtherCon) for control via PRONET software
• Compact 18 mm birch multiplex housing
• Dimensions (W x H x D): 754 x 511 x 770 mm
• Weight (without rollers): Approximately 61 kg
• Surface: Textured lacquer
• Colour: Black
• Includes 4 pieces 100 mm heavy duty castors

Note: Supplied without power cord. A splash-proof Power Twist connector is included.

Bundle offer comprising

• Compact amplifier with 4-channel DSP and 4-channel power amplifier
• Perfect for small installations and in combination with ceiling speakers
• Inputs: 4x 6.3 mm jack balanced
• Power: 4x 50 W @ 8 Ohm / 4x 60 W @ 4 Ohm (no bridge mode)
• Loudspeaker connection: binding posts
• Class D amps
• Programming via USB
• Signal to noise ratio:
• Distortion factor:
• Gain: 28 dB
• Built-in power supply: 230 V~ / 50 Hz
• Weight: 1.6 kg
• Dimensions (W x D x H): 240 x 160 x 43 mm
• Incldues USB cable

• Small loudspeaker
• Equipped with: 4" bass and 1" fabric dome tweeter
• Rated power : 40 W RMS/160 W peak
• Impedance: 8 Ohm
• Sensitivity: 109 dB max.
• Frequency range: 100 Hz - 20 kHz
• Dispersion: 90° x 90°
• Connectors: 2x NL4 and screw terminals
• Black textured paint finish
• Dimensions: 144 x 146 x 214 mm
• Weight: 2.5 kg
• Optional joint wall bracket available under Article Nr 251424
• Incl. L-shaped wall bracket, ceiling and stand mounting
• Optional stand adapter Article Nr 298731 for microphone stand mounting
• Developed in Germany

• Wall or Ceiling Mount
• For Achat 104 and 204
• Hole spacing: 60 mm
• Hole diameter: 7 mm
• With additional clamp
• Colour: Black

Note: Not compatible with Achat 104 A and 204 A

• High Quality Speaker Cable
• 2 x 1.5 mm²
• Colour: Black
• Made in Italy
• Sold by the metre

• Subwoofer with level stability
• High-quality workmanship for commercial use
• Equipped with: 2 x 18" - Bass reflex
• Power rating: 1600 W AES (3200 W peak)
• SPL: 100 dB, 136 dB max.
• Impedance: 4 Ohm
• Frequency range: 34 Hz - 150 Hz
• Without low pass filter
• Input and output: SPK 4-pin (Pin1)
• Optional: 100 mm blue wheels (not included)
• 12 Handles
• Weight: 82 kg (net), 90.0 kg (shipping)
• Dimensions (H x W x D): 1200 x 550 x 680 mm
• Housing material: Birch plywood with black anti-slip lacquer
• Compatible adaptor bolts M20: Article 199345 (not included)
• Compatible protective cover: Article 251600 (not included)
• Compatible set of wheels: Article Nr 415294 (not included)

Bundle offer comprising

• Active 8" Subwoofer
• Total power: 220 W
• Power subwoofer: 100 W
• Power tops: 2x 60 W
• Peak SPL: 116 dB
• Frequency range: 40 - 125 Hz
• Input: XLR/ jack combo and RCA
• Speaker twist output for top (each 60 Watt, crossover frequency: 120 Hz)
• Dimensions: 360 x 300 x 436 mm
• Weight: 11.5 kg
• Colour: White
• Made in Germany
• Matching protective cover: Art. 514851 (not included)

• Small Speaker
• Equipped with: 2 x 4" Bass and 1" fabric dome tweeter
• Power rating: 80 W RMS / 320 W peak
• Impedance: 4 Ohm
• 112 dB max
• Frequency range: 90 Hz - 20 kHz
• Dispersion: 90° x 90°
• Connectors: 2 x NL4 and screw terminal block
• 3/8" Thread on the underside
• Dimensions: 172 x 142 x 360 mm
• Weight: 3 kg
• Textured lacquer
• Colour: White
• Developed in Germany

Suitable accessories (not included):

• Wall bracket: Art.277955
• Bag: Art.484145

• Horizontal U-bracket
• U-bracket for horizontal mounting of an agate 204 on the ceiling or horizontally / vertically on the wall
• Material: Painted steel (black)
• A 3/8" screw is included
• Multiple perforations for minimizing wall clearance
• Dimensions 380 x 150 x 60 mm
• Shipping quantity: One
• Colour White

• Speaker Cable
• Length: 5 m
• SPK - SPK speaker cable with connectors by Rean (a Brand of Neutrik)
• Hook and loop cable ties included

• 10" Neodymium bass and 1" compression driver (woofer with 3 "voice coil)
• Multifunctional housing
• Power rating: 250W RMS / 1000W Peak
• Impedance: 8 Ohm
• Maximum level: 124 dB Max
• Frequency range: 70 Hz - 20 kHz
• Dispersion: 90° x 60°
• Tripod flange mount
• M10 rigging points
• Dimensions: 300 x 450 x 290 mm
• Weight: 11 kg
• Colour: Fine texture white
• Developed in Germany

• Powerful coaxial neodymium speaker
• 8" Mid / bass speakers and 1" tweeter
• Multifunctional housing
• Power rating: 140 W @8 Ohm RMS, 560 W Peak Power
• Impedance: 8 Ohm
• Frequency range: 80 Hz to 20 kHz
• Dispersion: 90° Radial
• Black textured finish
• Connectors: 2 x Speaker Twist NL4
• Speaker stand flange mount
• M10 Rigging points
• Dimensions: 248 x 264 x 370 mm
• Weight: 8 kg
• Developed in Germany
• Matching L-bracket: Art.215589 (not included)

• 15" Woofer and 1" compression driver with 1.75" voice coil
• Class D power amplifier
• Power: 350 W RMS, 1400 W peak
• Built-in DSP with 4 presets and low cut
• 2 XLR/jack inputs
• 1 XLR output
• Maximum level: 136 dB
• Coverage pattern: 90° x 60°
• Dimensions (W x H x D): 480 x 762 x 438 mm
• Weight: 20 kg
• Matching cover: Art.410590 or Art.482578 (both not included in delivery)
• Matching cases: Art.451589 or Art.489876 (both not included in delivery)

• Class D & Class AB power amplifier
• Power: 200 W RMS / 600 W peak
• Speaker components: 8" woofer and 1" compression driver (1.4" VC)
• Built-in DSP with 4 presets
• Low Cut
• Max. SPL (sound pressure level): 124 dB
• Dispersion pattern: 90° x 60°
• 2 XLR/Combo jacks
• 1 XLR output
• Dimensions (H x W x D): 487 x 275 x 270 mm
• Weight: 6.7 kg
• Suitable protective covers available under Article Nr 480680 or Article Nr 478666 (both are not included)
• Suitable case available under Article Nr 489889 (not included)

• High-quality wooden cabinet
• 1400 W Class D power amplifier
• Contents: 10" Woofer and 1" compression driver (1.35" VC)
• Built-in DSP with 4 presets
• Low Cut
• Maximum SPL (sound pressure level): 121 dB
• Dispersion pattern: 90° x 60°
• 2 x XLR / Jack inputs
• 1 x XLR output
• Dimensions (W x H x D): 335 x 545 x 320 mm
• Weight: 15.48 kg
• Suitable cover: Art.490202 (not included)

Bundle offer comprising

• 4-Channel Digital Power Amplifier
• Class D
• Power: 4x 500 W at 4 Ohm, 4x 250 W at 8 Ohm
• Built-in DSP
• 4 XLR inputs
• 4 Speaker twist outputs
• Format: 19" / 1 U
• Dimensions: 483 x 460 x 44 mm
• Weight: 8.0 kg

• Speaker
• Equipped with: 8 x 4" Bass & 1" BMS line driver
• Line source housing (column)
• Power rating: 300 W RMS/1200 W Peak
• Impedance: 4 Ohm
• Max. sound pressure level (SPL): 124 dB
• Frequency range: 60 Hz - 20 kHz
• Coverage pattern: 150° x 30°
• Connections: 2 x NL4 and binding posts
• Colour: Textured black
• Dimensions (W x H x D): 164 x 1138 x 233 mm
• Weight: 16.7 kg
• Developed in Germamy
• Corresponding wall mount available under Article Nr 212234 (not included)
• Corresponding stand flange mount available under Article Nr 251425 (not included)
• Corresponding protective cover available under Article Nr 283072 (not included)
• Corresponding bag available under Article Nr 490321 (not included)

• 12" Subwoofer
• Power rating: 350 W RMS / 1400 W peak
• Impedance: 4 Ohm
• SPL: 124 dB max
• Frequency range: 45 - 250 Hz
• Connectors: 2x SPK mounting sockets
• Stand flange M20
• Integrated crossover
• Dimensions: 450 x 380 x 456 mm
• Weight: 17 kg
• Optional protective cover available under Article Nr 240354 (not included)
• Developed in Germany

• Speaker Stand
• Standard aluminium speaker stand
• Tube diameter: Ø 35 mm
• Height adjustable with clamp screw
• Additional push button for secure hold
• Extension tube diameter 35 mm
• TÜV approved up to 40 kg centric load
• Weight: 3.2 kg
• Adjustable height: 1430 - 2240 mm
• Colour: Black

• Professional Speaker Cable
• Speakon Speaker Twist connector on each end
• Cross-section: 2 x 2.5 mm²
• 2-pin NEUTRIK Speakon Speaker Twist connector
• Length: 10 m
• Colour: Grey
• Not suitable for active speakers

• Stand Flange
• Compatible with Achat 804

Bundle offer comprising

• Active 15" Subwoofer
• Power: 750 W
• Frequency range: 45 - 200 Hz
• Peak SPL: 130 dB
• Adjustable High Cut
• Phase reverse switch
• Dimensions (W x H x D): 550 x 435 x 680 mm
• Weight: 32.5 kg
• Matching protection cases: Article Nr 250075 and Article Nr 278185 (both not included)
• Developed in Germany

• Active Multifunctional Loudspeaker
• Equipped with. 12" bass with 3" voice coil and 1.75" ferrite midrange/tweeter
• Power: 350 W RMS, 1400 W peak
• Maximum level: 126 dB
• Frequency range: 60 - 18000 Hz
• Coverage pattern: 60° x 40° (horn rotatable)
• 2x XLR/jack combo mic/line input
• Switchable presets: Bass boost / flat / 120 Hz HPF
• 2 Band equalisation
• Powertwist input and output
• Textured black lacquer
• 36 mm High stand flange socket
• Aeroquip rail on top side
• Stop eyelet on the rear
• Dimensions: 360 x 365 x 600 mm
• Weight: 20.7 kg
• Developed in Germany
• Matching protective cover: Article no. 280589
• Matching u-bracket: Article no. 258814

• Distance Rod
• Steel tube combination to connect satellite systems
• Load bearing capacity up to 35 kg
• With M20 threaded bolts
• To attach connector plate 24116 (Article Nr 104910 -not included)
• Adjustable height from 905 to 1450 mm
• Colour: Black

• Inexpensive Microphone Cable

A further development of the new, hand-soldered and inexpensive "FAIR LINE" microphone cable: for the first time the new, high-quality REAN-XLR connector is in action. REAN is a registered trademark of the company NEUTRIK, which also contributed to the renowned moulded anti-kink sleeve from the CORDIAL "FAIRLINE". This sleeve construction, in contrast to cheap, mass produced products, even enables the reparation of the cable, if necessary.

The new CCM FM microphone cables are assembled with CORDIAL's typical inlaid green ring for labelling.

• XLR female -- XLR male
• Cable profile: 2 x 0.2 mm²
• With Neutrik Rean connectors
• Hand-soldered
• Moulded anti-kink sleeve
• Colour coding with inlaid labelling block
• Length: 2.5 m

• Inexpensive Microphone Cable

A further development of the new, hand-soldered and inexpensive "FAIR LINE" microphone cable: for the first time the new, high-quality REAN-XLR connector is in action. REAN is a registered trademark of the company NEUTRIK, which also contributed to the renowned moulded anti-kink sleeve from the CORDIAL "FAIRLINE". This sleeve construction, in contrast to cheap, mass produced products, even enables the reparation of the cable, if necessary.

The new CCM FM microphone cables are assembled with CORDIAL's typical inlaid green ring for labelling.

• XLR female -- XLR male
• Cable profile: 2 x 0.2 mm²
• With Neutrik Rean connectors
• Hand-soldered
• Moulded anti-kink sleeve
• Colour coding with inlaid labelling block
• Length: 1 m

• Assembly: 2x 8" and 1.4"
• Eighteen sound transducer made in Italy
• 950 W + 350 W Class D amplifier with SMPS
• Frequency response: 85 - 18,000 Hz (+ - 3 dB)
• Beam angle (averaged): 100 ° x 10 ° (horizontal / vertical)
• Maximum level (1m): 134 dB
• Internal DSP with 4 presets
• SHARC processor
• RJ45 input and output (EtherCon) for control via PRONET software
• XLR input and output
• Power twist input and output
• Dimensions (W x H x D): 589 x 266 x 516 mm
• Weight: 27.5 kg
• Made in Europe

• Components: 12 "bass, and 1.4" tweeter
• Resilience: 350W / 8 ohms RMS, 1400W / 8 ohms Peak Power
• SPL 104dB / (1W / 1m)
• 135 dB / peak
• Frequency range: 63 Hz - 17 kHz (-10 dB)
• Dispersion 55 ° x 40 ° (H x V, nominal)
• Textured black paint
• Connectors: 2x NL4 (1/1)
• High stand flange mount
• Aeroquip rail on top
• Anchorage point on the back
• Dimensions: 55 cm x 60 cm x 68 cm (WxHxD)
• Weight: 43.0 kg
• Otional: Suitable roles available, article 243578
• Optional: Suitable cover available, article 222251
• Developed in Germany

• Power: 250 W RMS, 1000 W Peak
• Speaker components: 10" woofer and 1" compression driver with a 1.4" voice coil
• Built-in DSP with 4 presets and low cut
• Class D power amp
• Max. SPL (sound pressure level): 132 dB
• Dispersion pattern: 90° x 60°
• 2 XLR/Jack inputs
• 1 XLR output
• Dimensions: 298 x 523 x 307 mm
• Weight: 13 kg
• Suitable cover available under Article Nr 410588 or Article Nr 482576 (both are not included)
• Suitable case available under Article Nr 489872 (not included)

• High performance mid/high system
• Left horn
• 2x 8" + 1x 1.4" Horn loaded
• 400 W RMS / 1600 W Peak
• 16 Ohm
• 136 dB Max
• Frequency range 150 Hz - 20 kHz
• Dispersion 60° x 40°
• Connectors 2 x NL4
• M10 Thread for speaker mount flange
• Black textured paint finish
• Dimensions (W×H×D) 435 x 659 x 507 mm
• Weight 30 kg
• Developed in Germany
• Stand adapter: Article Nr 120118 (not included)
• Protective cover: Article Nr 321393 (not included)

• Level stable, quality processed subwoofer for commercial use
• Equipped with 2x 18" bass reflex
• Power: 4500 W peak
• Birch multiplex housing with black anti-slip lacquer finish
• Peak SPL: 136 dB
• Impedance: 4 O
• Frequency range: 34/ 150 Hz
• Without high pass
• XLR input and output
• Adjustable crossover frequency
• 100 mm blue wheels (optional)
• 12 handles
• Weight: 82 kg (net)
• Weight 92.5 kg (shipping)
• Dimensions: 1200 x 550 x 680 mm
• 3 year warranty
• Suitable set of casters: Article Nr 415294 (not included)
• Suitable M20 adapter bolts: Article Nr 199345 (not included)
• Suitable protective cover: Article Nr 251600 (not included)

• Speakers: 8 x 4" bass and 1" BMS line driver
• Line source housing (Column)
• 300 W RMS / 1200 W Peak
• 4 Ohm
• 124 dB Max
• Frequency range: 60 Hz - 20 kHz
• Dispersion: 150° x 30°
• Connectors 2 x NL4 and screw terminals
• White textured paint finish
• Dimensions 164 x 1138 x 233 mm
• Weight: 16.7 kg
• Compatible wall mount available under Art. Nr: 228001 (not included)
• Developed in Germany

• With 4" voice coil
• Class D amplifier
• Power: 2x 2000 W
• Frequency response: 36 - 100 Hz
• SPL max.: 141 dB
• 4 Presets: Standard, InfraSub, Cardioid or User
• Network connection
• XLR input and output
• PowerTwist input and output
• Dimensions: 1215 x 590 x 950 mm
• Weight: 101.68 kg
• Incl. caster set
• Made in Europe
• Corresponding protective cover: Article Nr 334761 (not included)

Bundle offer comprising

• Multifunctional Speaker
• Equipped with: 15" bass and 1.4" neodymium mid-range/tweeter (3" voice coil)
• Multifunctional housing, very versatile
• Power rating: 350 W RMS / 1400 W Peak
• Impedance: 8 Ohm
• Sound pressure: 131 dB max
• Frequency range: 60 Hz - 17 kHz
• Coverage pattern: 60° x 40°
• Flange mount
• Aeroquip fittings on the top
• Lifting eyelet on the back
• Dimensions (W x D x H): 438 x 440 x 766 mm
• Colour: Black
• Finish: Structure lacquer
• Weight: 32 kg
• Developed in Germany
• Compatible protective case: Article 249422 (not included)
• Compatible U-bracket: Article 258815 (not included)

• Bass Speaker
• High-output 18" bass for touring
• Power rating: 600 W RMS / 2400 W peak
• Impedance: 8 Ohm
• SPL 96 dB / (1 W / 1 m), 129 dB / Peak
• Frequency range: 35 - 150 Hz (-3 dB)
• Connectors: 2x NL4 (1+ / 1-) and 2x NL4 for system cabling (2+ / 2-)
• Finish: Textured paint, black
• With 2 top flange adaptors M20
• Dimensions (W x H x D): 55 x 61.8 x 68 cm without wheels
• Weight: 37 kg
• Optional: Compatible set of wheels 415294
• Optional cover: Art.279781

• Distance Rod
• Steel tube combination to connect satellite systems
• Load bearing capacity up to 35 kg
• With M20 threaded bolts
• To attach connector plate 24116 (Article Nr 104910 -not included)
• Adjustable height from 905 to 1450 mm
• Colour: Black

• the box pro Achat Amprack MK II
• 2 piece(s) the box pro Achat Stack Board 208
• the box pro Achat 208 HR
• the box pro Achat 208 HL
• 4 piece(s) the box pro Achat 118
• 4 piece(s) pro snake 14710-1.5 Speaker Twist 4-pin
• 2 piece(s) pro snake 14740-10 Speaker Twist 4-pin