Tiptop Audio

• Enclosure can be set up at three different angles: 0°, 45°, 90°.
• 36 Slots for Eurorack modules
• Includes external power supply: +12 V / 3000 mA, -12 V / 1100 mA, 5 V / 300 mA
• External dimensions (W x H x D): 540 x 107 x 314 mm
• Internal dimensions: Width: 2 x 104 HP
• Height: 6 U
• Depth above bus board: approx. 50 mm
• Internal depth bottom row: approx. 61 mm
• Weight: 3 kg

• Classic diode design that adds odd harmonics by folding the incoming signal, generating up to 4 square waves spaced one octave apart
• Width: 12 HP
• Depth: 42 mm
• Power requirement: +60 mA (+12 V) / -55 mA (-12 V)

• Digital multi-effect module with 24 different algorithms
• Effect algorithms include chorus, tri-chorus, ensemble, vibrato, dual flange, resonator, Haas panner, phaser, tremolo, ping pong delay and much more
• Adjustment options for modulation rate, modulation depth, filter
• Fidelity control to influence DSP clock and audio quality
• Input level and wet/dry mix controls
• CV inputs for Depth, Rate/Fidelity (selectable) and Filter
• Mono input and stereo outputs
• Clip LED
• Current consumption: 130 mA (+12 V) / 20 mA (-12 V)
• Width: 8 HP
• Depth: 40 mm
• Colour: White

• Digital multi-effect module with 24 different algorithms
• Effect algorithms include chorus, tri-chorus, ensemble, vibrato, dual flange, resonator, Haas panner, phaser, tremolo, ping pong delay and much more
• Adjustment options for modulation rate, modulation depth, filter
• Fidelity control to influence DSP clock and audio quality
• Input level and wet/dry mix controls
• CV inputs for Depth, Rate/Fidelity (selectable) and Filter
• Mono input and stereo outputs
• Clip LED
• Current consumption: 100 mA (+12 V) / 20 mA (-12 V)
• Width: 8 HP
• Depth: 40 mm
• Colour: White

Tiptop Audio Wayout8; Eurorack module; patchbay module for organizing signals between multiple Eurorack cases or between a Eurorack system and DAW; 8 inputs and outputs; suitable for audio, CV and gate/trigger signals; grounded inputs to avoid unwanted noise; passive module (no power required); width: 6 HP; depth: 10mm

• Two flying bus boards; each with 5 slots
• Width of the module: 4 TE / HP
• Depth: 36 mm

Note: Requires additional external power supply boost adapter (item 438425, not included); Voltage specifications with optional boost adapter: +12 V / 2000 mA, -12 V / 500 mA, +5 V / 170 mA.

• Based on the original TR 808 circuit
• Additional features: Independent Accents, High Gain Level, Pulse Shaper and Voltage Controlled Q Factor
• Includes two sounds: Open and closed hi-hat
• Analogue sound generation with six analog square wave oscillators sent through bandpass filters
• Width: 8 HP
• Depth: 14 mm
• Power requirements: +30 mA (+12 V) / -25 mA (-12 V)

• Simple and inexpensive way to build a Eurorack system

Comprises:

• 2 Z-Rails (width: 84 HP)
• 2 Z-Ears
• UZeus power supply (width: 4 HP) with two Flying bus boards
• External power supply (1000 mA)

• Analogue Dual Oscillator
• Two independent oscillators, each with controls for coarse and fine tuning (5Hz - 20kHz), waveshape, FM attenuator and bipolar CV attenuator
• Upper oscillator with waveshaping from sine to sawtooth
• Lower oscillator with waveshaping from sine to square
• Pitch CV input (1V/oct.) and two audio outputs per oscillator
• Current consumption: 70mA (+12V) / 40mA (-12V)
• Width: 18 TE
• Depth: 45 mm

• TR-808 Based analogue Rimshot and Clave for Eurorack systems
• Two extra percussive sounds in addition to the classic TR-808 sounds
• Controls for Level, Snap, Pitch and Accent
• Width: 4 HP
• Depth: 14 mm
• Power requirements: +14 mA (+12 V) / -13 mA (-12 V)

• TR-808 Bassdrum clone for modular systems
• Controls for Level, Tone, Decay and Accent
• Powerful output gain stage that generates signals up to 20 Vpp
• If no Accent In is patched, the accent poti acts to adjust the output level
• Width: 4 HP
• Depth: 14 mm
• Power requirements: +13 mA (+12 V) / -6 mA (-12 V)

• Replica of the original TR-909 bass drum
• Controls for Attack, Decay, Tune Decay, Accent and Level (like the original)
• Additionally extended by a tuning control for the oscillator with VC input and attenuator, tune attack, extended decay tuning and overload
• Width: 8 TE / HP
• Depth: 36 mm
• Power requirement: +34 mA (+12 V) / -21 mA (-12 V)

• Sequential Voltage Source
• CV sequencer with 4 rows and 5 steps each
• Internal clock (pulser) with adjustable pulse width (range: 0 - 100%), adjustable tempo (approx. 0.02 Hz - 1,000 Hz)
• CV inputs for pulse width and tempo
• Pulse and ramp outputs
• Start and stop buttons, each with trigger input
• Clock input for CV sequencer (Advance In)
• CV input and trigger inputs for direct selection of steps
• Adjustable number of steps: 1 - 5
• CV output per row and gate output per step: 0 - 10V
• Power consumption: 63mA (+12V) / 28mA (-12V)
• Width: 30 TE
• Depth: 25mm

• For mixing audio, CV and gate signals
• Module consists of three parts: Mixer A: a low-noise 4-channel mixer
• With independent gain control for each channel
• Mixer B: a low-noise 4-channel mixer with master gain control
• MixBus: A multi-channel mixer that mixes signals from modules with the Tiptop MixBus
• Width: 10 HP
• Depth: 36 mm
• Power requirement: +14 mA (+12 V) / -12 mA (-12 V)

• The first 50% of the pots are designed for high-resolution settings in the millisecond range
• The second 50% of the control path adjusts the time range from 1 s to 1 min
• Attack slope switch allows selection of a logarithmic or exponential characteristic for the Attack segment
• Output signal can be scaled, mirrored and inverted, an offset can be added
• Width: 8 HP
• Depth: 28 mm
• Power requirement: +34 mA (+12 V) / -18 mA (-12 V)

Tiptop Audio Model 266t; Eurorack module; Source Of Uncertainty - muti-channel source for random voltages; two sections for fluctuating random voltages, each with adjustable rate (0.05Hz - 50Hz) and CV input; one section for quantized random voltages (number of steps adjustable via control knob and CV input) with trigger input and two outputs providing differently distributed random values; one section for stored random voltages with trigger input and two outputs providing evenly distributed random values and adjustable amplitude distribution (probability for low, mid and high values adjustable via control knob and CV input); adjustable integrator / slew limiter with CV input; Sample & Hold section with four alternating trigger and CV outputs; noise generator with three outputs (pink, white and blue noise); power consumption: 150mA (+12V) / 100mA (-12V); Breite: 24 TE; Tiefe: 25mm

• Simultaneous polyrhythmic modulation of up to 10 CV parameters
• 16 Rotary knobs for editing sequences
• Each potentiometer can interact with all 10 CV outputs
• 4x Horizontally running 4-step CV sequencers
• 4x Vertically running 4-step CV sequencers
• 1x Horizontally running 16-step CV sequencers
• 1x Vertically running 16-step CV sequencer
• Each sequencer features its own clock-, direction- and reset inputs
• Width: 28 HP
• Depth: 15 mm
• Power requirement: +70 mA (+12 V) / -10 mA (-12 V)

• Analog rimshot sound generator of the TR-909 in Eurorack format
• Sound generation: Three T-bridge oscillators, each generating a damped sine wave at a different frequency, are mixed and sent to a VCA - controlled by an envelope generator that delivers the familiar attack-rich sound
• The original circuitry has been supplemented with frequency control of two internal oscillators to allow more timbres
• Width: 4 TE / HP
• Depth: 36 mm
• Power requirement: +12 mA (+12 V) / -10 mA (-12 V)

• Housing can be set up in three different angles: 0°, 45°, 90°
• 36 Slots for Eurorack modules
• Includes external power supply: +12 V / 3000 mA, -12 V / 1100 mA, 5 V / 300 mA
• External dimensions (W x H x D): 540 x 107 x 314 mm
• Internal dimensions: Width: 2 x 104 HP / HP
• Height: 6 HE
• Depth above the bus board: Approx. 50 mm
• Inner depth (lower row): Approx. 61 mm
• Weight: 3 kg

• Voltage-controlled digital signal processor
• DSP with 24-bit resolution and 15 kHz bandwidth
• High-class stereo effects via interchangeable cartridges (reverb, chorus, pitch-shifting, delay, etc.)
• With "The Halls of Valhalla" and "Dragonfly Delay MkII"
• High-output level and signal to noise ratio
• Wet / dry mix without level loss
• CV Inputs for effect parameters, feedback and DSP timing
• Width: 28 TE
• Depth: 25 mm
• Power requirement: 200 mA (+12 V) / 87 mA (-12 V)