Tiptop Audio

• Dual Voice Module, which contains the original TR-909 Crash and Ride circuits
• Sound generation using low-fi samples sent through analog filters and envelopes
• Manual and voltage-controlled tuning of the sample (VC-Tune)
• Width: 8 TE / HP
• Depth: 46 mm
• Power requirement: +60 mA (+12 V) / -40 mA (-12 V)

The easy and affordable way to build a Eurorack system

• Consists of: 2x Z-rails (width: 84 HP), 2x Z-ears, uZeus power supply (width: 4 HP) with 2x flying bus boards
• External power supply included (1000 mA)

• Digital multi-effect module with 24 different algorithms
• Effect algorithms include chorus, flanger, ensemble, formant and microshift delays, tape echo, multitap delays, reverb, plate, gate, shimmer reverb and much more
• Option to adjust time, filter and modulation depth/feedback
• Fidelity control for improving the DSP clock and audio quality
• Controls for input level and wet/dry mix
• CV inputs for filter, Time/Fidelity (selectable) and Modulation/Feedback
• Mono input and stereo outputs
• Clip LED
• Power requirements: 100 mA (+12 V) / 20 mA (-12 V)
• Width: 8 HP
• Depth: 40 mm
• Colour: White

• Analogue clap sound generator of the TR-909 in Eurorack format
• Precise reproduction of the original analog circuit with just one additional control (Trash), which extends the sound spectrum
• Sound generation: special triple sawtooth envelope generator that controls the gain of a VCA - logic-based pseudo-noise generator serves as the signal source for the VCA
• Width: 4 TE / HP
• Depth: 36 mm
• Power requirement: +6 mA (+12 V) / -10 mA (-12 V)

• Snare drum clone of the later TR-808 for modular systems
• Controls for Level, Tone, Snappy and Accent
• Analog circuit of the TR-808
• Powerful output gain stage that generates signals up to 20 Vpp
• Width: 4 HP
• Depth: 14 mm
• Power requirements: +18 mA (+12 V) / -16 mA (-12 V)

• Digital delay with 24 different algorithms
• Effect algorithms include BBD simulation, tape echo, ping pong, multitaps, Pitch-Shift delays, chorus echo, shimmer taps and more
• Options for adjusting delay time, filter and feedback
• Fidelity control for improving the DSP clock and audio quality
• Controls for input level and wet/dry mix
• CV inputs for filter, Time/Fidelity (selectable) and feedback
• Mono input and stereo outputs
• Clip LED
• Power requirements: 100 mA (+12 V) / 20 mA (-12 V)
• Width: 8 HP
• Depth: 40 mm
• Colour: Black

• Enclosure can be set up at three different angles: 0°, 45°, 90°.
• 36 Slots for Eurorack modules
• Includes external power supply: +12 V / 3000 mA, -12 V / 1100 mA, 5 V / 300 mA
• External dimensions (W x H x D): 540 x 107 x 314 mm
• Internal dimensions: Width: 2 x 104 HP
• Height: 6 U
• Depth above bus board: approx. 50 mm
• Internal depth bottom row: approx. 61 mm
• Weight: 3 kg

• Original closed and open hi-hat circuit of the TR-909
• Sound generation as in the original with low-fi samples sent through analog filters and envelopes
• Manual and voltage-controlled tuning of the sample (VC-Tune)
• Modulation input for AM or FM
• Width: 8 TE / HP
• Depth: 36 mm
• Power requirement: +33 mA (+12 V) / -22 mA (-12 V)

• Enclosure can be set up at three different angles: 0°, 45°, 90°.
• 36 Slots for Eurorack modules
• Includes external power supply: +12 V / 3000 mA, -12 V / 1100 mA, 5 V / 300 mA
• External dimensions (W x H x D): 540 x 107 x 314 mm
• Internal dimensions: Width: 2 x 104 HP
• Height: 6 U
• Depth above bus board: approx. 50 mm
• Internal depth bottom row: approx. 61 mm
• Weight: 3 kg

• Analogue mixer
• Mixes 7 inputs together to one output
• Suitable for adding audio, CV and trigger signals
• Low-noise circuit design
• A lot of headroom for high-grade Eurorack signals
• Power requirement: 25 mA (+12 V) / 20 mA (-12 V)
• Width: 3 HP
• Depth: 43 mm

• Dual Voltage processor
• 2 Identical channels, each with 3 inputs for scaling, inverting, mixing and modulating control voltages and audio signals
• Input Va with bipolar attenuator
• Voltage-controlled crossfader (inputs Vb & Vc) with switchable +5 V offset for input Vb
• Sum output with adjustable offset (0 V - 10 V)
• Power consumption: 45 mA (+12 V) / 22 mA (-12 V)
• Width: 14 U
• Depth: 25 mm

• 4 dB 4-pole low pass VCF
• Redesign of the Prophet 5 Rev 2 Low Pass Filter
• Voltage controllable gain and resonance
• Self-oscillating
• FM input for filter sweeps
• VC-FM input for controlling the FM modulation depth
• Voltage controlled VCA that can be switched in front of or behind the filter
• Width: 8 HP
• Depth: 42 mm
• Power requirements: +20 mA (+12 V) / -20 mA (-12 V)

• Digital reverb with 24 different algorithms
• Effect algorithms include reverb, plate, ambience, gated, room, shimmer reverbs and much more
• Options for adjusting reverb time, filter and modulation depth
• Fidelity control for improving the DSP clock and audio quality
• Controls for input level and wet/dry mix
• CV inputs for filters, time/fidelity (selectable) and modulation
• Mono input and stereo outputs
• Clip LED
• Power requirements: 100 mA (+12 V) / 20 mA (-12 V)
• Width: 8 HP
• Depth: 40 mm
• Colour: White

• 8 Channels assigned in 4 rows and 4 columns
• In Matrix mode, the rows and columns are able to interact with each other
• Independent mode allows for the separate editing of individual channels
• Accurate internal clock
• Can be synchronised to external equipment
• The following settings fetaure per channel: Divide, Step, Probability, Speed, Clock Shift, Time Shift, Pulse Width
• SyncBus technology for simple synchronisation to other SyncBus-enabled modules
• Width: 28 HP
• Depth: 28 mm
• Power requirement: +200 mA (+12 V) / -0 mA (-12 V)

• Quad Function Generator
• Per channel: Control for attack and decay time (1ms - 10s), CV input for attack and decay, trigger button, trigger input, mode switch (transient, sustained, cyclic), cycle gate input, end-of-decay trigger output and signal output
• Quadrature mode switchable in pairs for function generators A-B and C-D
• Current consumption: 160mA (+12V) / 55mA (-12V)
• Width: 28 TE
• Depth: 32 mm

• Multipurpose module for creative work on CV- and Audio signals
• 2 Sections with 2 respective inputs
• Voltage-controlled crossfader between Sections 1+2 and A+B
• Each section can mix, invert, scale, and offset
• Power requirements: 55 mA (+12 V) / 55 mA (-12 V)
• Width: 10 HP
• Depth: 42 mm

Tiptop Audio Z-DSP NS Black; voltage controlled digital signal processor; DSP with 24 Bit sampling and 15 kHz of bandwidth; first class stereo effects via interchangeable cartridges (Reverb, Chorus, Pitch-Shifting, Delay etc.); "The Halls of Valhalla" and "Dragonfly Delay MkII" included; high output level and S/N ratio; equal power wet/dry mixer; CV inputs for effect parameters, feedback and DSP clocking; width: 28 HP; depth: 25 mm; current: 200 mA (+12 V) / 87 mA (-12 V)

• TR-909 Snare Drum clone
• Analog sound generator consisting of a binary noise generator and two modulated oscillators with triangular waveform
• Additional tap of the noise generator
• Noise generator and oscillators variably adjustable and voltage controllable
• Width: 8 TE / HP
• Depth: 46 mm
• Power requirement: +35 mA (+12 V) / -30 mA (-12 V)

Tiptop Audio Mantis Black; Eurorack case; case can be set up in three different angles, 0°, 45°, 90°; 36 slots for Eurorack modules; incl. external power supply: +12 V / 3000 mA, -12 V / 1100 mA, 5 V / 300 mA; external dimensions (W x H x D): 540 x 107 x 314 mm; internal dimensions: width: 2 x 104 HP / HP, height: 6 U, depth above bus board: 50 mm, depth lower row: 61 mm; weight: 3 kg; color: black

• Digital delay with 24 different algorithms
• Effect algorithms include BBD simulation, tape echo, ping pong, multitaps, pitch-shift delays, chorus echo, shimmer taps and more
• Options for adjusting delay time, filter and feedback
• Fidelity control for improving the DSP clock and audio quality
• Controls for input level and wet/dry mix
• CV inputs for filter, time/fidelity (selectable) and feedback
• Mono input and stereo outputs
• Clip LED
• Power requirements: 100 mA (+12 V) / 20 mA (-12 V)
• Width: 8 HP
• Depth: 40 mm
• Colour: White