XAOC Devices

• Triple mixer for trigger and gate signals
• Divided into three independent areas
• Up to four signals can be processed in each area (4: 1 combiner or gate)
• Area coupling by switch
• Simple CV summation
• Power consumption: 10 mA
• Dimensions: 6 HP / HP x 25 mm (WxD)

• Voltage-controlled stereo frequency shifter
• Shift control with 3 selectable control ranges (+/- 50 Hz, 500 Hz and 5 kHz)
• Through-Zero FM with linear and exponential CV input
• Feedback/regeneration control with CV input and 3 selectable modes: Down, Up, Combi
• Density control with CV input
• Stereo input with clip LED
• Audio outputs for down shift and up shift signal
• Current consumption: 140 mA (+12 V) / 30 mA (-12 V)
• Width: 10 TE

• Binary phase accumulator
• Component of the Leibniz subsystem - can be combined with Drezno, Jena, Odessa and Lipsk
• Works as clock and audio divider with 8 outputs, bidirectional binary counter, digital oscillator and more
• Inputs for reset and 2x clock signal (ascending and descending)
• Outputs: 8 bit
• Current: 25 mA (+12V) / 30 mA (-12V)
• Width: 6 HP

• Analogue VCO for complex waveforms
• Triangle-core oscillator with pitch control and octave selector switch
• Two ripple elements, based on synthesis of formant sounds (FOF)
• Ratio, warp, damping and waveform (sine/rectangle) are adjustable per ripple element
• Element mix control with CV input
• Adjustable mix of sine fundamental tone and ripple elements (with CV input)
• CV inputs for all parameters
• Pitch CV input (1V/oct.)
• CV inputs with attenuators for Pitch FM and Global FM
• Outputs for the main signal, fundamental tone, ripple elements A&B, impulses A&B (decay curve of the elements)
• Current consumption: 90mA (+12V) / 80mA (-12V)
• Width: 24 TE
• Depth: 30 mm

• Stereo M/S processor
• Image knob and image CV input for manupulating the stereo width
• Position knob for balance control at stereo output
• 6 LEDs for stereo width and phase display
• Switchable high-pass filter (50Hz / 300 Hz) for the side signal
• Mono/stereo audio input
• Send/return sockets for centre and side signal
• Stereo output
• Current consumption: 140 mA (+12 V) / 40 mA (-12 V)
• Width: 6 HP
• Depth: 32 mm

• Universal module for mixing, inverting, distributing and dividing control voltages and signals
• Two independent 1: 4 buffered multiples
• Two voltage transformers
• 4: 1 Summer
• Power consumption: 50 mA
• Dimensions: 6 HP

• Variable stereo band isolator
• 3 Frequency bands (low, mid, high), each with volume fader and CV input
• Mid band with adjustable bandwidth and frequency: 160 - 10,000 Hz
• CV inputs for bandwidth and frequency of the mid band
• Stereo input
• Stereo sum output
• Stereo output per frequency band
• Current consumption: 100 mA (+12 V) / 100 mA (-12 V)
• Width: 10 HP

• Synchronisable analogue delay
• BBD (bucket brigade) delay with 3 delay taps
• Delay time: 20 ms - 1.5 s
• Individual outputs for 3 delay taps
• Input with level control
• Wet/Dry control with CV input
• CV input for delay time
• Feedback control
• Feedback loop input for external processing
• Tap Tempo button and sync input for external clock signal
• Tone control
• Power supply: 180 mA (+12 V) / 120 mA (-12 V)
• Width: 12 TE

XAOC Devices Sopot; Eurorack module; Triple Signal Summator; three sections (Mix L, Mix M, Mix R) that each sum four inputs to one output; soft clipping circuit per section; middle section (Mix M) can be fed to the other two sections (Mix L, Mix R) by 0%, 50% or 100%; switchable -12dB pad for high signal levels; power consumption: 30mA (+12V) / 20mA (-12V); width: 6 HP; depth: 30mm

• Stereo multimode filter
• 4-Pole (-24 dB / oct.) state variable filter
• Configurable bandpass characteristic
• Cutoff control and resonance fader
• Two FM CV inputs, one with bipolar attenuator
• Spread CV input for shifting the filter frequencies between left and right channel
• Mono/stereo audio input
• Stereo outputs for high-pass, bandpass and lowpass
• Current consumption: 70 mA (+12 V) / 60 mA (-12 V)
• Width: 8 HP
• Depth: 32 mm

• Expander for Moskwa II sequencer (Art.521036)
• Expands Moskwa II with CV inputs for Random Play, Slew, Probability, Transpose, Range, Clock Rate, First Step, Last Step
• Output of the internal clock signal
• Separate gate output for each of the 8 steps
• Connection to the XAOC Leibniz Binary Subsystem possible
• Power supply via Moskwa II module
• Width: 8 HP
• Depth: 30 mm

• Stereo multi-effect processor
• 24Bit DSP engine
• 176 factory presets with effects like reverb, shimmer reverb, delay, chorus, flanger, filter, pitch shifter, distortion, resonator and many more
• 3 parameters per preset editable via fader and CV inputs
• Wet/dry fader with CV input
• Presets selectable via encoder and CV/trigger inputs
• OLED display
• Stereo inputs and outputs with level control
• MicroSD card slot
• Power consumption: 120mA (+12V) / 45mA (-12V)
• Width: 10 U

XAOC Devices Gera; Eurorack module; Binary Product Commander; expander module for Leibniz subsystem; applies AND logic function on every bit of the Leibniz data stream; 8 illuminated buttons and 8 Gate inputs; power consumption: 45mA (+12V) / 0mA (-12V); width: 6 HP; depth: 30mm

• Quad envelope generator
• Four independent channels
• 260 Unique vector shapes
• Cycle time range: 0.85 ms to 30 min
• Shapes can be radically changed in two dimensions
• Complex envelope and concatenation functions
• Assignable CV inputs to control almost all parameters
• OLED display
• Preset Management (up to 18 Presets)
• Connections: 4 x CV input and output 3.5 mm mini-jack
• 4 Trigger inputs 3.5mm mini-jack
• Can be expanded with trigger buttons and CV inputs via optional NIN expander (Art.461981 - not included)
• Current consumption: 90 mA (+12 V) / 40 mA (-12 V)
• Dimensions: 10 HP
• Depth: 30 mm

• Polyphony Commander for XAOC's Odessa Oscillator (available under Article Nr 474296 (not included))
• Freely control up to 5 voices via individual CV inputs (1V/oct.)
• Power is supplied via the main module
• Width: 3 HP

• Utility waveform processor for CV and audio signals
• Functions: Mixing, Inverting, Offset Generation, Minimum / Maximum Analysis, Signal Limitation, Signal Scanning, Sample & Hold
• 4 Channels with 2 inputs each
• Exit and attenuator
• 5V offset switchable for channels 1 & 2
• Power requirement: 50 mA (+12 V) / 20 mA (-12 V)
• Width: 10 U
• Depth: 20 mm

• Analog voltage-controlled Dual-core filter module
• 10 Different filter types
• Frequency range: approx. 4 Hz to 28 kHz
• Input level adjustable via controller
• Non-linear feedback and cross-modulation
• Power consumption: +45 MA/-42 mA
• Dimensions: 14 HP