Behringer

• Power: 4x 860 Watt at 4 Ohm, 4x 440 Watt at 8 Ohm
• Inputs: Jack and XLR
• Outputs: Speaker-twist
• Built-in crossover
• Integrated limiter
• Mains, signal and limit LEDs
• Dimensions: 19" / 2 HE
• Housing depth: 320 mm
• Weight: 6.1 kg

Bundle offer comprising

• E-Drum Set

Complete electronic drum set including:

• Sound module
• Bass kick pedal with kick pad
• Hi-hat controller
• 1x 8" Stereo snare pad
• 3x 8" Stereo tom pads
• 3x 12" E-cymbal pads
• U-Drum rack
• Multi-pin pad connection cable
• Drumsticks

Characteristics of the sound module:

• 175 Integrated sounds
• 15 Drum sets and USB interface
• 10 Preset and 5 programmable drum kits
• Integrated sequencer for exercise recordings

• Drum Throne
• Round seat
• Diameter: 28 cm
• Double-braced
• Continuously adjustable in height (without fixed increments)
• Min. height: 53 cm
• Max. height: 63 cm
• Colour: Black

• Headphones
• Circumaural
• Closed
• Rotatable earcups
• 57 mm driver
• Frequency range: 20 - 20,000 Hz
• Sensitivity: 110 dB
• Impedance: 32 Ohm
• Max. input level: 100 mW
• 3 m cable with 3.5 mm jack plug and 6.3 mm adapter
• Weight without cable: 244 g

• Drumsticks
• Size 5A
• American Classic Series
• Hickory wood
• Wooden tips
• Teardrop tips
• Ideal for rock and as practice sticks
• Length: 406 mm
• Diameter: 14,4 mm

• Direct connection of instruments to amplifiers and mixers
• Allows long cable paths without loss of sound in the high frequency range
• Jack input
• Parallel output
• Balanced XLR output ground lift switch solves typical problems with ground loops
• Road-suitable metal housing

• With FBQ Feedback Detection System audio anayser
• Servo-balanced inputs and outputs with jack and XLR
• Additional Sub-Out (XLR) with adjustable low-pass 30-200 Hz
• Switchable Low-Cut
• 4-Digit LED display and input level control
• Illuminated faders
• Design: 19" / 1U

• Analogue envelope generator
• Controls for attack, decay, release time and sustain level
• Segment times adjustable from 2 ms - 10 s
• S-trigger input
• Width: 8 HP

Behringer HPM1100 monitoring headphones, wired, closed back, over ear, dynamic, frequency range: 20 Hz - 20.000 Hz, impedance: 32 ohms, sound pressure: 96 dB SPL, driver size: 40mm, cable length 2m, connection: 3,5mm TRS jack, adapter 3,5mm to 6,3mm included, color: black

• Powerful 300 W RMS, 2-way monitor system
• Class-D amplifier technology
• Adjustable feedback filter and integrated limiter
• Sound processor
• Extremely low-noise mic/line input with level control and clip LED
• 3-Band EQ
• 12" Driver for deep basses and high SPL
• 1" HF Driver for brilliant treble reproduction
• Proprietary horn design for ultra-wide sound dispersion
• Internal switched-mode power supply
• Integrated 35 mm stand/tripod flange mount
• Dimensions (H x W x D): 360 x 580 x 406 mm
• Weight: 15.7 kg
• Optional protective cover: Article Nr 291556 (not included)

Feedback Destroyer ProThe FBQ2496 is the fastest (> 0.2 sec.) And the only 96 kHz feedback suppressor on the market. With its ultra-fast and intelligent feedback detection algorithm, it is capable of automatically locating up to 20 feedback frequencies per channel and suppressing them with extremely narrow notch filters, while the useful signal is virtually unaffected.

The "Set-and-Forget" and panic buttons ensure a super-simple and instant feedback suppression. In Auto mode, the mix is ​​continuously monitored and filter settings adjusted automatically, while in manual mode, up to 40 fully parametric filters can be set, adjustable in frequency, bandwidth and boost / cut. An open MIDI architecture allows future software updates and flexible communication with digital equipment. With the different operating modes, you are able to react flexibly to different situations within the scope of the live application - but the FBQ2496 also offers a creative sound shaping tool in the studio.

• Fully parametric filters
• 2 Channel
• Up to 20 feedback frequencies per channel
• Ultra-fast feedback detection (> 0.2 sec)
• Auto / manual operation either
• 24-bit / 96 kHz A / D and D / A converter
• 32-bit DSP
• MIDI interface
• Up-date-able
• Sym. (!) in / out jack
• Power supply 100 V-240V
• 19 "rack format with 1U

• On/Off switch
• Directional characteristic: cardioid
• Mid-frequency presence boost for excellent voice projection
• Integrated wind and pop noise filter
• Shock mount system to reduce handling noise
• 3-Pin XLR connector
• Frequency range: 50 - 16,000Hz
• Impedance: 300 Ohm
• Sensitivity: -54 ± 2 dBV/Pa
• Max. SPL (sound pressure level): 150 dB
• Weight: 320 g
• Includes a microphone stand adapter and case
• Designed and engineered in Germany

• 3 Modes: Cable Tester, Installed Cable Tester and Test Sound Mode
• Equipped with inputs and outputs for XLR, SpeakerTwist, 6.3 mm and 3.5 mm stereo jack, RCA, RJ45, MIDI and USB
• LED display
• Continuity testing and intermittent contact detection
• Phantom power and ground test
• Test tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV
• Operation with 2 batteries AA (not included)

• Two independent analogue ADSR envelopes
• For each envelope: manual trigger button, gate input, fader for attack, decay, sustain and release
• 2 Signal outputs and inverted output
• Analogue LFO with 5 waveforms
• Fader for frequency and delay time
• Three frequency ranges selectable (0.05 - 30Hz)
• CV and trigger input and 2 signal outputs
• Current consumption: 40mA (+12V) / 40mA (-12V)
• Width: 16 HP
• Depth: 44 mm

• Equipped with: 15" + 1.75 titanium tweeter
• Rated power: 250 W continuos, 1000 W peak power
• SPL: 94 dB 1 W @ 1m
• Impedance: 8 Ohm
• Frequency range: 50 Hz - 22 kHz
• Dispersion: 80 x 50°
• Inputs: Speaker Twist and 6.3 mm jack
• Dimensions: 455 x 685 x 465 mm
• Weight: 22.6 kg
• Suitable protection cover available under Art.275180

• 49 Half-weighted full-size keys
• Velocity sensitive keys with aftertouch
• 4 FX engines powered by tc electronic and Klark Teknik
• 24 oscillators - 2 OSCs and LFOs per voice
• 3 ADSR generators
• Switchable 2- or 4-pole low-pass filter per voice
• High-pass filter
• 8-Channel modulation matrix
• 32-Step control sequencer
• Envelope Depth
• Key tracking
• Remote controllable via iPad/PC/Mac, USB, MIDI or built-in Wi-Fi
• 26 Knobs and one switch per function for direct access to all important parameters in real time
• 1024 Programme memories
• Built-in and adjustable Wi-Fi client
• LC display
• Dimensions (W x D x H): 822 x 257 x 103 mm
• Weight: 8.4 kg
• Designed and engineered in the U.K.
• Suitable optional bag: Art.479789 (not included in delivery)
• suitable optional case: Art.416352 (not included in delivery)

• Special edition with gray front plate and selected components
• Monophonic
• 3 VCOs with adjustable pulse width
• Oscillator 1 with outputs for sawtooth and pulse
• Oscillators 2 and 3 with switchable oscillator synchronisation and outputs for triangle, sawtooth, sine, and pulse
• Low pass filter with resonance and 2 switchable filter characteristics
• Noise generator
• Ring modulator
• Sample & hold step
• Preamp and Envelope follower for external signals
• Voltage processor
• ADSR envelopes
• AR envelopes
• Stereo VCA with adjustable panorama
• Mixable mechanical spring reverb
• Extensive modulation options are possible for oscillators and filters via predefined signal path and free wiring of all sections via patch cables (3.5 mm jack)
• Stereo line output: 2x 6.3 mm jack
• Stereo headphone output: 3.5 mm jack
• Footswitch input for interval latch and portamento : 6.3 mm jack
• MIDI In/Thru
• USB-B port (MIDI)
• Format: 19" / 8 U
• Dimensions (W x H x D): 482 x 356 x 108 mm
• Weight: 5.1 kg
• Colour: Grey
• Includes external power supply (12 V DC, 2000 mA)

• Successor to the Behringer ADA8000 Ultragain
• 8-Channel AD/DA transformer 24-Bit at 44.1/48 kHz
• 8 Integrated microphone amplifiers (designed by MIDAS)
• Sample rate sync
• All Mic/Line inputs routable to ADAT outputs, all ADAT inputs routable to Line outputs
• 48V Phantom power at each input
• Integrated "Planet Earth" mains adaptor
• Rack format: 19" / 1 RU

Connectors:

• 8 x XLR Mic in
• 8 x 6.3 mm jack line in, balanced
• 8 x XLR line out, balanced
• ADAT in/out
• Word clock

• Mackie Control Mode for integration with any music software
• Several X-Touch and Extender units can provide a large user interface
• 8 Contact-sensitive motorised wires 100 mm
• 8 LCD displays to display and overview the track names and parameters
• 8 Rotary potentiometer with LEDs for direct access
• Built-in USB / MIDI interface for direct connection of Mac or PC Standard MIDI I / O

• Analogue signal path
• 2 VCOs with CEM3340 chips
• Continuous transition between 5 waveforms
• Paraphony mode for two-part sounds
• Multimode VCF with resonance
• 2 Analogue ADSR envelopes for VCF and VCA
• Flexible LFO with 5 waveforms and MIDI sync
• Analog BBD delay
• Noise generator
• Overdrive circuit
• 43 Control elements for direct access
• Jack matrix with 32 inputs, 24 outputs for enhanced sound and connectivity with other modular synthesisers & sequencers
• Can be used as a complete Eurorack synthesiser voice (width: 80 HP)
• MIDI In / Thru and USB-MIDI
• 6.3 mm audio input for sound processing from external sources
• 6.3 mm headphone output
• 6.3 mm line output
• Dimensions: 94 x 424 x 136 mm
• Weight: 2.0 kg
• Power adapter included (12 V DC, 1000 mA)
• Suitable protective cover: Article no. 477466 (not included)
• Suitable cases: Art.#480286, Art.483005 (both not included)

• Eurorack Go housing
• Includes power supply unit and BP56, BP28 and BP12 plate blanks
• 96 HP free for expansion with other modules

Modules included:

• 914 Fixed Filter Bank
• 923 Filters
• 904A VC Low Pass Filter
• 904B VC High Pass Filter
• 2 x 902 VCA
• 2 x 911 Envelope Generator
• 921A Oscillator Driver
• 2 x 921B Oscillator
• 921 VC Oscillator
• CP3A-M Mixer
• CP35 Attenuators
• 961 Interface
• CM1A MIDI-CV Interface