Thon

• Fits Pioneer DJM 2000
• 7 mm birch multiplex
• 25 x 25 mm aluminum edges
• Rounded corners medium
• 2 x Spring loaded butterfly latches
• 1 x Rear handle
• 4 x Rubber feet
• Minimum 10 mm foam padding
• Device can be operated in the lower case compartment
• All connectors accessible
• Made in Germany
• External dimensions (W x D x H): 499 x 200 x 548 mm
• Weight 6.7 kg
• Weight with mixer 15.3 kg
• Colour: Phenol brown

• Detachable lid
• 7 mm birch plywood
• 22 x 22 mm aluminium edges
• 1 Handle
• 2 Drawbolts
• 2 Locking hinges
• Small ball corners
• External dimensions (W x H x D): 467 x 402 x 200 mm
• Dimension (W x H x D) 432 x 360 x 135 mm
• Weight: 5.1 kg
• Made in Germany
• Colour: Phenol brown

Thon LP Case Standard PB - for approx. 80 LP`S, unpadded, lid can be removed at the top, lock with a snap lock, one case handle on the lid, 7 mm polyboard, 22 x 22 mm aluminium edge, 2x unhooking hinge, small ball corners, inside dimensions (W x H x D): 325 x 320 x 275 mm, outside dimensions (W x H x D): 355 x 350 x 305 mm, weight 4.2 kg, colour: black, made in Germany

• Material: 19 mm particle board
• Melamine-coated
• Curved design
• Closed edge
• Dimensions (W x D x H): 1750 x 790 x 19 mm
• Weight: Approx. 15 kg
• Colour: Oak
• Manufactured in Germany

Customisation suggestions:

• Thon pull out keyboard shelf available under Article Nr 507364 (not included)
• Thon desktop extension module (oak, curved) available under Article Nr 507359 (not included)
• Suitable stand available under Article Nr 491963 (not included)
• Suitable cable duct available under Article Nr 507362 (not included)

• Made of 19 mm FPY chipboard
• Keyboard drawer shelf
• Drawer shelf width: 992 mm
• Monitor bridge
• 2x 3 U rack rails for 19" devices (max. installation depth 23 cm - with screw set)
• Cable feed-through with cover caps
• External dimensions of the assembled table (W x D x H): 1060 x 660 x 935 mm
• Working height: 77.5 cm
• Height of monitor bridge: 16 cm
• Compartment width: 50 cm
• Weight: 36.3 kg
• Colour: Black
• Screw set included
• Made in Germany

Note: The table is delivered in a disassembled state and must be set up.

• Suitable for Rane Seventy Battle Mixer
• Mixer can be played in the case
• All connections freely accessible
• Made of 7 mm birch plywood
• 25 x 25 mm Aluminium edge
• 4 Butterfly latches
• 1 Leather handle
• 4 Rubber feet
• 8 Steel ball corners
• Foam padding
• Cable duct
• External dimensions (W x D x H): 360 x 620 x 205 mm
• Weight: 6.5 kg
• Colour: black
• Made in Germany

• Suitable for Numark Mixtrack Platinum and Mixtrack Platinum FX
• Made of 6.5 mm birch plywood
• 22 x 22 mm Aluminium profiles
• 2 Butterfly latches small
• 1 x Case handle
• 4 x Rubber feet
• Foam padding exactly to the dimensions of the controller
• Small steel ball corners
• Space for power cord behind the device
• External dimensions (W x D x H): 615 x 354 x 145 mm
• Weight: 5 kg
• Colour: Phenol brown
• Made in Germany

• Custom made hood case for Pioneer DJM-250
• 7 mm birch plywood
• 22 x 22 mm Aluminium edges
• Min. 10 mm foam padding
• 2 Mini butterfly latches
• 1 Handle
• Device can be operated in the case
• 4 Rubber feet
• Steel ball corners
• Made in Germany
• External dimensions (W x D x H): approx. 30.4 x 44.3 x 17.5 cm
• Weight: approx. 3.7 kg
• Weight with CDJ approx. 6.85 kg
• Colour: Phenol brown

• Suitable for the Thon 1750 producer's studio desk (white, curved) - Available under Article Nr 507343 (not included)
• Installation depth from the front edge: 325 mm
• Material: 19 mm particle board, melamine coated
• Curved design
• Closed edge
• Dimensions: (W x D x H) 1750 x 324 x 159 mm
• Weight: Approx. 10.2 kg
• Colour: White
• Manufactured in Germany
• Includes screws

Note: Module is delivered unassembled.

• Suitable for one Denon DJ X1850 Prime and 2 DJ SC6000 or 6000M Prime
• Made of 6.5 mm birch plywood
• 25 x 25 mm Aluminium edge
• 4 Medium-sized butterfly latches
• 3 Medium folding handles
• 6 Medium ball corners
• 4 Rubber feet 38 x 20 mm
• 2 Edge castors
• Foam padding made to measure
• Equipment can be operated in the case
• Covered cable duct at the rear with cable outlets on the left and right
• External dimensions (W x D x H): approx. 1130 x 645 x 250 mm
• Weight: approx. 21 kg
• Colour: Black coated
• Made in Germany

• Suitable for the Pioneer XDJ-XZ
• Made from 7 mm birch multiplex wood
• 22 x 22 mm aluminium edges
• 4 Butterfly latches
• 3 Folding handles
• 8 Rounded ball edges
• 4 Rubber feet
• With cable duct
• Connections are freely accessible
• Controller can be played directly in the case
• Foam padding made to measure
• Dimensions (W x D x H): 950 x 595 x 210 mm
• Weight: 12.9 kg
• Colour: Black RAL 9004
• Made in Germany

• Tiptop Audio Flying Bus Board Cable
• Thon Eurorack Case 208
• Tiptop Audio uZeus Boost Power Adapter
• Tiptop Audio uZeus

Thon mixer case Allen&Heath Xone :96 PB - Material: 7 mm polyboard, 25 x 25 mm aluminium edges, foam padding, 2 spring-loaded medium butterfly latches, 1 case handle, rubber feet, steel ball corners, cable duct at the back, outer dimensions (W x D x H):405 x 530 x 205 mm, weight: 6 kg, colour: black, made in Germany

• 19 mm Particle board
• Melamine-coated
• Straight
• Closed edge
• Dimensions (W x D x H): 1750 x 790 x 19 mm
• Weight: Approx. 17.3 kg
• Colour: Black
• Manufactured in Germany

Customisation suggestions:

• Thon pull out keyboard shelf available under Article Nr 507364 (not included)
• Thon black desktop extension module available under Article Nr 507349 (not included)
• Suitable stand available under Article Nr 491963 (not included)
• Suitable cable duct available under Article Nr 507362 (not included)

• Custom made for Native Instruments Traktor Control S4 MK3
• Material: 6.5 mm Birch multiplex wood
• 22 x 22 mm Aluminium edge
• Foam padding
• 4 Mini butterfly closures
• 1 Leather handle
• Steel corners
• 38 x 10 mm Rubber feet
• Device can be operated in the lower part
• Space for power supply
• Colour: Phenolic resin, brown
• Made in Germany

• Consists of 19 mm chipboard
• Melamine coated
• Straight shape
• Closed edge
• Size (W x D x H): 1750 x 790 x 19 mm
• Weight: approx. 19,5 kg
• Colour: Maple decor
• Made in Germany

Extendable with:

• Thon keyboard drawer: Art.507364 (not included in delivery)
• Thon extension desktop module beech: Art.528667 (not included in delivery)
• Matching stand: Art.491963 (not included in delivery)
• Matching cable duct: Art.507362 (not included in delivery)

• For approx. 80 LPs
• Material: 7 mm birch plywood
• 22 x 22 mm Aluminium edges
• Approx. 1 cm foam padding on the bottom inside
• 2 cm foam padding in the lid
• 1 Folding handle in lid
• 1 Butterfly latch with stopper
• Detachable lid
• 2 Lift-off hinges
• Small steel ball corners
• Outside dimensions (W x H x D): 35 x 38 x 30.5 cm
• Weight: 5.3 kg
• Colour: Blue
• Made in Germany

• Consists of 19 mm chipboard
• Melamine coated
• Curved shape
• Closed edge
• Size (W x D x H): 1750 x 790 x 19 mm
• Weight: approx. 15 kg
• Colour: beech
• Made in Germany

Extendable with:

• Thon keyboard drawer: Art.507364 (not included in delivery)
• Thon extension desktop module beech curved: Art.528674 (not included in the scope of delivery)
• Matching stand: Art.491963 (not included in delivery)
• Matching cable duct: Art.507362 (not included in the scope of delivery)

• For about 90-100 LPs
• Padded with 1 cm foam
• From 7mm birch plywood blue
• Aluminium edging 25x25 mm
• 2 Indented handles
• 2 Spring butterfly latches
• Medium steel corners
• 8 Rubber feet (4 per side)
• Made in Germany
• External dimensions (WxDxH) 35 x 35 x 39.1 cm
• Weight 6.4 kg
• 30-Day Money-Back Guarantee
• Colour: Blue

• Custom-made for Native Instruments Traktor Kontrol S3
• Hybrid front flap
• Material: 6.5 mm birch multiplex phenolic resin coated
• 22 x 22 mm aluminium edge
• 2 Small butterfly latches
• 1 Leather handle
• 8 Small ball corners
• 4 Rubber feet
• 25 x 15 mm on edge
• All connections directly accessible
• Foam interior
• Dimensions (W x D x H): 676 x 498 x 186 mm
• Weight: approx. 8.7 kg
• Colour: Brown
• Made in Germany