|
|
Tube Amp Head for Electric Guitar
- Small and lightweight
- Switchable from 4 Watt to 20 Watt
- Built-in Two Notes Reactive Load & Virtual Cabinets (6 customisable virtual cabinets selectable via the front knob or up to 128 via MIDI, without speaker directly connectable to mixer, interface or headset)
- In the Reactive Load Direct Mode, the Pre & Post switch selects whether the power amplifier is in the signal chain
- Reactive Load is automatically activated when no speaker is detected to protect the amplifier
- 1 Channel
- Power: 20 W
- Preamp tubes: 2 x 12AX7
- Power amp tubes: 2 X 6v6
- Controls: Gain (push / pull for more Crunch), Treble, Middle, Bass, Volume, Virtual cabinet
- Switches: Standby, On/Off, Power 4/20 Watt, Pre/Post, Impedance 8/4 Ohm, Groundlift, Internal Load/Speaker
- Speaker outputs: 8/4 Ohm (6.3 mm jack)
- Effect loops: Buffered Series
- Guitar input: 6.3 mm jack
- Headphone output (6.3 mm jack)
- MIDI input
- USB
- Balanced Output (XLR)
- FX Loop Send / Return (2 x 6.3 mm jack)
- Speaker output (6.3 mm jack)
- Dimensions (W x D x H): 310 x 160 x 190 mm
- Weight: 4.1 kg
- Colour: White
- Made in Canada
|
Price History: Revv D20 Amp Head WH
1,090.00 $ |
|
|
Effect Pedal for Electric Guitar
- Distortion
- The Purple Channel 3 tone of the Revv amps in pedal format
- Tight & clear with the right distortion for every situation
- True bypass
- Controls: Gain - Volume - Bass - Middle - Treble
- Switch: Aggression (Red / Off / Blue)
- LED: Effect On
- Footswitch: Effect Bypass
- Connections: Input (6.3 mm jack) - Output (6.3 mm jack) - Power supply connector (coaxial connection 5.5 x 2.1 mm - negative pole inside)
- Power supply via DC power supply (not included in delivery, eg Art. 409939)
- Power consumption: 17 mA
- Dimensions (W x D x H): 70 x 121 x 32 mm
- Weight: 363 g
- Made in Canada
Note: No battery operation possible.
|
Price History: Revv G3 Distortion
218.00 $ |
|
|
Tube Amp Head for Electric Guitar
- New MK3 version with integrated two-notes torpedo reactive load and virtual cabinets with stereo XLR output, which deliver perfect direct sound for stage, studio and home applications
- 4 Channels
- Power: 120 watts - power levels from 120 W down to 10 W.
- Optimised Red & Purple channels
- New Clean & Crunch Voices
- Integrated noise gate & reverb
- Fully programmable
- Can be controlled either by simply changing programs or by calling up presets using the foot switch provided or with compatible MIDI devices
- Internal load - automatically active if no speaker is connected
- Cuolored illuminated acrylic logo
- Rear bias test points with easily accessible settings for each pair of power tubes as well as a tube fault indicator
- Preamp tubes: 5x 12AX7
- Power amp tubes: 4x 6L6GC
- Controls: 4x Treble, 4x Middle, 4x Bass, 4x Level, 3x Gain, Master 1, Master 2, Presence, Depth, Virtual Cab, Level
- Switches: Wide, Bright, Fat & Cut
- Effects: Reverb & Noise Gate
- Speaker outputs: 4 ohms (2x 6.3 mm jack), 8 ohms (2x 6.3 mm jack), 1x 16 ohms (6.3 mm jack)
- Effect loop-in paths: Buffered Serial Effects Loop
- Input: 6.3 mm jack
- FX Send & Return: 6.3 mm jack
- Foot switch connection: 5-pin DIN
- USB (Type B)
- MIDI In & Thru
- 2 Stereo direct outputs: XLR
- Cab Lighting: 4-pin DIN
- Dimensions (W x D x H): 673 x 254 x 267 mm
- Weight: 20.9 kg
- Includes 6-way foot switch & protective cover
- Handmade in Canada
|
Price History: Revv Generator 120 MK3
2,999.00 $ |
|
|
Effect Pedal
- Distortion
- The Red Channel 4 sound in pedal format
- Gain "Monster" with tube amp-like distortion that can also cover old-school sounds
- True bypass
- Controls: Gain - Volume - Bass - Middle - Treble
- Switch: Aggression (Red / Off / Blue)
- Effect On LED
- Effect bypass foot-switch
- Connections: input (6.3mm jack) - output (6.3mm jack) - power supply connection (hollow plug socket 5.5 x 2.1 mm - negative pole inside)
- Current consumption: 17 mA
- Power supply via 9 V DC power supply unit (not included in scope of delivery - e.g. Article Nr. 409939)
- Dimensions (W x D x H): 70 x 121 x 32 mm
- Weight: 363 g
- Made in Canada
Note: Battery operation not possible.
|
Price History: Revv G4 Distortion
227.00 $ |
|
|
Foot Switch
- 4-Button foot switch for the Revv G20 Amp Head
- Changes channels and aggression modes
- Turns on/off the Two Notes Reverb and the "Wide" Voice Switch or recalls favourite settings
- Incl. 7.5 m connection cable
|
Price History: Revv G20 Footswitch
127.00 $ |
|
|
Revv Dynamis D25 Combo; Tube Combo Amplifier for Electric Guitar; Revv’s D20 in a lightweight combo with new upgrades; 25 or 5w operation; Organic, touch-sensitive clean & edge of breakup tones perfect for pedals; Built-in MIDI controllable Two Notes Torpedo XLR DI-Out with Reactive Load and Impulse Responses for uncompromising direct performance and recording; Channels: 1; Power: 25/5 Watts; Pre-Amp Tubes: 2 x 12AX7; Power-Amp Tubes: 2 x 6V6; equipped with: 1 x 12" Celestion Vintage 30 Speaker/s; Controls: Level, Treble, Middle, Bass, Volume, Reverb, Output Level, Virtual Cabinet 1-5; Switches: Gain Boost, Pre/Post, 5/20W; Dimensions (W x D x H): 495 x 254 x 457 mm; (19,5" x 10" x 18"); Weight: 14,5 kg (32 lbs); Made in Canada
|
Price History: Revv Dynamis D25 Combo
1,690.00 $ |
|
|
Tube Amp Head for Electric Guitar
- Contains a clean channel and the typical Revvs tube-controlled high-gain violet channel with 3 levels of aggression and a wide switch for the shape tone
- Built-in Two Notes Reactive Load & Virtual Cabinets - 6 customisable virtual cabinets selectable via the front rotary knob or up to 128 via MIDI - direct connection for FOH / mixer, interface or headphones without box
- In Reactive Load Direct Mode, Pre & Post-Switch selects whether the power amplifier is in the signal chain
- Reactive Load is automatically activated when the speaker is not recognised to protect the amplifier
- 2 Channels
- Power: Switchable from 4 to 20 watts
- Preamp tubes: 3x 12AX7
- Power tubes: 2x 6V6
- Controls: Gain (push / pull for more crunch), Treble, Middle, Bass, Volume, Virtual cabinet
- Switches: Wide, 4/20 Watts, Ch., Aggr., Pre / Post, Store, 8/4 Ohm, Groundlift, Internal Load / Speaker
- 6.3 mm Jack speaker outputs: 8/4 ohms
- FX loop: Buffered series
- Dimensions (W x D x H): 312 x 160 x 190 mm
- Weight: 4.8 kg
- Includes carry case
- Made in Canada
Connections: - Input: 6.3 mm jack
- Headphone output: 6.3 mm jack
- MIDI input
- USB
- Balanced Output: XLR
- FX loop: 2 x 6.3 mm jack
- Speaker output: 6.3 mm jack
|
Price History: Revv G20 Amp Head
1,277.00 $ |
|
|
Tube Amp Head for Electric Guitar
- Small and lightweight
- Switchable from 4 to 20 W
- Built-in Two Notes Reactive Load & Virtual Cabinets (6 customisable virtual cabinets selectable via the front knob or up to 128 via MIDI, directly connectable without speaker to mixer, interface or headset)
- In the Reactive Load Direct Mode, the Pre & Post switch selects whether the power amplifier is in the signal chain
- Reactive Load is automatically activated when no speaker is detected to protect the amplifier
- 1 Channel
- Power: 20 W
- Preamp tubes: 2 x 12AX7
- Power amp tubes: 2 x 6v6
- Controls: Gain (push/pull for more crunch), treble, middle, bass, volume, virtual cabinet
- Switches: Standby, On/Off, power 4/20 W, pre/post, impedance 8/4 Ohm, ground lift, internal load/speaker
- Effect loops: Serial buffered
- Speaker outputs: 8/4 Ohms
- Dimensions (W x D x H): 310 x 160 x 190 mm
- Weight: 4.1 kg
- Colour: Black
- Gigbag included
- Made in Canada
Connectors: - Guitar input: 6.3 mm jack
- Headphone output: 6.3 mm jack
- MIDI input
- USB
- Balanced output: XLR
- FX loop send & return: 2x 6.3 mm jack
- Speaker output: 6.3 mm jack
|
Price History: Revv D20 Amp Head BK
1,090.00 $ |