Gibson

• Body: Mahogany (Swietenia macrophylla)
• Top: AA flamed maple
• Neck: Mahogany (Swietenia macrophylla)
• Fretboard: Rosewood (Dalbergia Latifolia)
• Slim taper neck profile
• Graph Tech nut
• Nut width: 43 mm
• Scale: 628 mm
• 22 Medium frets (cold-treated)
• Cream body binding
• Trapeze inlays
• Cream coloured fretboard binding
• Aluminium Tune-O-Matic bridge
• Aluminium stop bar
• Burstbucker 61T bridge pickup
• Burstbucker 61R neck pickup
• Controls: 2x Volume controls, 2x tone controls
• Hand-wired with Orange Drops capacitors
• Colour: Iced Tea
• Case included
• Made in USA

Gibson counts the P490 pickups as modern classics, and that is also a great sound description for this well-known part of many modern Gibson guitars. The starting point was the legendary PAF (now available as Classic 57); this one has a bit more upper middle to make it more powerful. Still, with the Alnico 2 magnet, the typical singing sound is always guaranteed. The R version of the P490 has slightly less output power than the T, and is thus ideally suited for the neck position. Wonderful bell-like sounds without sludge - the P490 is not a screamer, but he sings all the more beautiful!

• Humbucker
• The modern equivalent of the Classic 57
• The 4-wire cable enables different switching versions
• With Vintage alnico magnets
• Characteristics: Singing lead sounds and powerful rhythm sounds
• Design: Black coils

• Mahogany body (Swietenia macrophylla)
• Maple top
• Mahogany neck (Swietenia macrophylla)
• Rosewood fingerboard (Dalbergia Latifolia)
• Trapeze fingerboard inlays
• Neck profile: Rounded C
• Cream body and fingerboard binding
• Scale: 628 mm
• Nut width: 43 mm
• Graph Tech nut
• 22 Cold treated medium frets
• Pickups: 2 mini humbuckers
• 2 Volume and 2 tone controls hand-wired with Orange Drops capacitors
• Aluminium Tuneomatic bridge
• Aluminium stop bar
• Nickel Hardware
• Colour: Gold Top
• Incl. case
• Made in USA

• Murphy Lab model
• Body: Solid mahogany (swietenia macrophylla)
• 9-ply through neck: Mahogany / walnut (swietenia macrophylla)
• Fingerboard: Rosewood (dalbergia latifolia)
• Perloid trapeze fingerboard inlays
• Neck profile: Authentic '63 Medium "C
• Scale length: 628 mm
• Fretboard radius: 12"
• Nut width: 42 mm
• 22 frets
• Pickups: 2 Firebird AlNiCo V humbuckers
• 2 volume and 2 tone controls
• 3-way toggle switch
• ABR-1 bridge with Maestro Vibrola tremolo
• Deluxe banjo tuners
• Nickel hardware
• Finish: Ultra light aged - lacquer cracks
• Colour: Pelham blue
• Incl. Case and certificate of authenticity
• Made in USA

• Custom Shop
• Les Paul 1959
• Body: Solid mahogany
• Top: Maple (hide glue)
• One-piece neck: Mahogany
• Fretboard: Rosewood (hide glue)
• Neck profile: Authentic '59 Medium "C"
• Fretboard inlays: Aged cellulose nitrate trapezoids
• Frets: 22 x Historic medium jumbo
• Aniline dye back
• Pickups: 2 Unpotted Custombucker AlNiCo III humbuckers
• Potentiometers: CTS 500k
• Capacitors: Oil-in-paper
• Bridge: No-Wire ABR-1
• Aluminium stopbar
• Machine heads: Kluson Single Ring Vintage
• Cellulose acetate butyrate plastic parts
• Hardware: Nickel
• Colour: Dirty Lemon
• Includes a Lifton case and certificate
• Made in the USA

• Pickups of the Gibson Custom and Gibson Custom Shop Historic models not yet available separately
• Classic PAF ("Patent applied for") construction and sound
• Position: Bridge
• Output: Vintage
• String spacing: Standard
• Connections: 2-wire
• Magnet material: Alnico 3
• Colour: Zebra, without cover

• Les Paul 1957 - Murphy Lab Model
• Arched top: Maple
• Body: Mahogany (Swietenia Macrophylla)
• One-piece neck: Mahogany (Swietenia Macrophylla)
• One-piece fingerboard: Rosewood (Dalbergia Latifolia)
• Trapezoid fingerboard inlays
• Neck profile: 57
• 22 Frets
• Pickups: 2 custombuckers AlNiCo III with True Historic nickel covers
• Completely hot glued
• Historic trussrod assembly without tubing
• Aniline Dye Back
• True Historic Top Hats
• Vintage machine heads
• Nickel Hardware
• Finish: Ultra Heavy Aged with extreme playing marks and very worn
• Colour: Double Gold
• Incl. custom case
• Made in USA

Alongside the discreet and balanced Gibson classics, a truly fierce model must not be missed.

The 500T manages the balancing act of having a very high output, but at the same time not sinking into muddy fields. A good emphasis on the treble and strong but firm basses make this possible. Ideal for compact boards, screaming leads and also deeper tunings.

The 4-conductor connector cable also allows for more intricate circuit variants.

• Very high output due to high number of coils and 3 ceramic magnets
• Treble and bass accentuated
• Ideal pickup for heavy rock sounds
• Colour: Black

• Lefthanded model
• Body: Mahogany
• Neck: Mahogany
• Fretboard: Rosewood
• Neck profile: Slim taper
• 22 Frets
• Scale: 628 mm
• Pickups: 2x '70s Tribute humbuckers
• Controls: 2 Volume, 1 Tone
• Capacitors: Orange Drop
• Bridge: Aluminium Tune-O-Matic and stopbar
• Hardware: Chrome
• Colour: White
• Includes a case
• Made in the USA

Originally, the mini humbuckers were only found on the Gibson Les Paul Deluxe. The narrower magnetic field produces a clear and compact sound compared to normal humbuckers. In the 1970s, these pickups were often replaced by stronger (and often significantly lower) pickups - today, where gain and sustain are no longer a big issue thanks to the modern amps and pedals, you can appreciate the great sound of these pickups.

The model for the neck position has a little less output and sounds wonderfully bell-like - ideal for the big band of guitarists, where a normal humbucker at the neck always sounds messy.

• Small size
• Limited magnetic field - a clear and focused sound
• Original replica with Alnico II magnets
• Adjustable pole screws
• With cream-coloured plastic handles
• Suitable for the neck position
• Cover: Chrome

• 2019 Limited Run
• Body: Mahogany (Swietenia macrophylla -- Origin: India / Indonesia)
• Neck: Mahogany (Swietenia macrophylla -- Origin: India / Indonesia)
• Fretboard: Rosewood (Dalbergia latifolia)
• Neck shape: Rounded
• 20 Frets
• Scale: 774 mm
• Nut width: 40 mm
• Pickups: Rhythm SG Bass (neck) and Lead SG Bass (bridge) humbucker
• Tektoid nut
• 3-Point bridge
• Colour: Heritage cherry
• Case included
• Made in USA

• Body shape: 00
• Top: Solid Sitka spruce
• Back and sides: Solid mahogany
• Neck: Mahogany
• Fretboard: Rosewood
• Neck profile: Slim taper
• 19 Frets
• Scale: 628 mm (24.75")
• Nut width: 43.80 mm (1.725")
• Bone nut
• LR Baggs VTC pickup system
• Rectangle bridge
• Golden Age machine heads
• Colour: Vintage sunburst
• Case included
• Made in USA

• Top: Solid Sitka spruce
• Traditional Hand Scalloped X-Bracing
• Back and sides: Rosewood (Dalbergia latifolia)
• Neck: Mahogany
• Fretboard: Ebony
• MOP Fretboard inlays
• Multicolour "Rope" top binding and single-ply bottom binding
• 19 Frets
• Nut width: 43.8 mm
• Scale: 629 mm
• Mini Grover Rotomatic machine heads
• LR Baggs VTC pickup system
• Colour: Rosewood Burst
• Case included
• Made in USA

His new Gibson LG-2 Western is also a blend of Nathaniel's own old Gibson LG-2 and Country Western. The smaller mahogany body and Adirondack red spruce top deliver that tried-and-true vintage tone.

• Nathaniel Rateliff Signature Model
• Back & sides: Solid mahogany
• Top: Solid red spruce
• Neck: Mahogany
• Fretboard: Rosewood
• Pearloid parallelogram fretboard inlays
• Scale length: 629 mm (24.75")
• Nut width: 43.8 mm (1.73")
• Bone nut
• 20 Frets
• Rosewood bridge with bone inlay
• Pickup: LR Baggs VTC with Volume and Tone
• Gotoh Keystone machine heads
• Strings: .012 - .053
• Colour: Vintage Sunburst
• Includes case
• Made In U.S.A

• Lefthanded model
• Body: Mahogany
• Top: AA flamed maple
• Neck: Mahogany
• Fretboard: Ebony
• Asymmetrical slim taper neck profile
• Graphtech nut
• Nut width: 43 mm
• Scale: 628 mm
• 24 Cryogenically treated medium frets
• Mother-of-pearl trapezoid fretboard inlays
• White fretboard binding
• Pickup: Burstbucker Pro Rhythm and Pro Lead+ Humbucker
• 2 Volume controls (push / pull for coil tap)
• 2 Tone controls
• Aluminium Nashville Tune-o-matic bridge
• Aluminium stop bar
• Grover machine heads
• Colour: Blueberry fade
• Case included
• Made in USA

• Custom Shop model
• Body: Solid mahogany
• Continuous 9-piece neck: Mahogany / walnut
• Fretboard: Rosewood
• Neck profile: Authentic ´63 Medium "C"
• Perloid trapezoid fretboard inlays
• Fretboard radius: 12"
• Scale length: 628 mm
• Nut width: 42 mm
• 22 Frets
• Pickups: 2 Firebird AlNiCo V humbuckers
• 2 x Volume controls
• 2 x Tone controls
• 3-Way toggle switch
• Deluxe banjo machine heads
• ABR-1 bridge with Maestro Vibrola tremolo
• Nickel hardware
• Colour: vintage sunburst
• Includes case and certificate
• Made in USA