LD Systems

Bundle offer comprising

• UHF Wireless In-Ear System
• Consists of 9.5" stereo transmitter MEI 100 T, body pack receiver MEI 100 G2 BPR, and earphones
• Up to 8 systems simultaneously
• Frequency range: 823 - 832 MHz and 863 - 865 MHz
• Integrated limiter up to +12 dB
• 2 jacks/XLR combination inputs
• Headphone output
• Operation with 2 AA batteries
• Detachable BNC antenna
• Includes rack mount, batteries, antenna cable for front mounting, and plastic case

• Dynamic In-Ear Earphones
• In-ear
• Impedance: 16 Ohm
• SPL: 108 dB max
• Frequency response: 25 - 17.000 Hz
• Cable length: 127 cm
• Gold plated stereo jack 3.5 mm
• Colour: Grey
• Various ear pieces and storage bag included

Note: According to current EU regulations on volume control, this product is intended for professional use only and must not be used in the consumer sector

• Casterboard with lashing belt
• 1 Case for subwoofer
• 2 Cases for satellites
• Colour: Black

• Suitable for ICOA 12 A and ICOA 12 A BT
• Material: 1680D nylon
• Water repellent
• Padded 8 mm thick
• Handle cutouts are reinforced at the edges and are covered by a flap with hook and loop fastener
• Outside pocket for accessories
• Dimensions (H x W x D): 630 x 380 x 400 mm
• Weight: 0.8 kg
• Colour: Black

Note: speakers not included!

• Especially suitable for CURV 500 installations
• 4 x 240 W at 4 ohms
• 4 x 120 W at 8 ohms
• 4 x 60 W at 16 ohms
• Frequency range: 10 - 22,000 Hz
• Each channel can control up to six CURV-500 satellites or one CURV500ISUB subwoofer
• OLED display
• Protection circuits: DC, short circuit, over-current, soft start, thermal overload
• Inputs: 4 x Line, terminal block, XLR
• 4 Speaker outputs
• Dimensions (W x H x D): 482 x 44 x 420 mm
• Weight 6.8 kg
• Format: 19" / 1 U

• For the ICOA 18" subwoofer
• Material: Water-resistant 1680D nylon
• 8 mm Padding
• Reinforced grip recesses
• Practical inner pocket for accessories
• Dimensions (H x W x D): 682 x 636 x 647 mm
• Weight: 1.4 kg
• Colour: Black

• For 1x LDMEI1000 or 1x LDMEI1000X

• Consists of 9.5" stereo transmitter MEI 1000 T, 1x pocket receiver MEI 1000 BPR and 1 x headphones
• Up to 5 systems parallel
• Mono / stereo
• Integrated limiter up +12 dB
• 2 x Combo inputs
• Headphone output
• Operates with 2 AA batteries
• Removable BNC antenna
• Frequency band: B5 (584-607 MHz)
• Includes rack mount, batteries, antenna cable for front mounting and plastic carrying case

• Passive 15" + 1" monitor/full range loudspeaker
• Power rating: 500 W RMS / 1000 W peak
• Max SPL: 127 dB
• Frequency range: 58 - 20,000 Hz
• Impedance: 8 Ohm
• BMS tweeter
• Dispersion angle (H x V): 90° x 50°
• Terminal with 1x Speaker Twist input and 1x Speaker Twist output
• 15 mm Plywood housing
• 36 mm Dual tilt tripod flange
• 3 flying points
• Dimensions: 480 x 737 x 455 mm
• Weight: 26.4 kg

• For the Maui 44 G2 column speaker
• 8 mm Padding
• For the Maui 44 G2 subwoofer
• 8 mm Padding
• Dimensions (H x W x D): 160 x 920 x 240 mm
• Weight: 1.2 kg
• Colour: Black / grey

• Active bass reflex subwoofer with 18" speaker
• Integrated DSP
• Integrated Class-D power amp
• Power: 800 W RMS, 1600 W Peak
• Max. SPL (sound pressure level): 135 dB
• Frequency range: 35 - 200 Hz
• Integrated DSP with the following protected circuit designs: limiter, overheating, overvoltage, overcurrent
• Switchable high cut at 80 Hz, 100 Hz and 120 Hz
• Switchable cardioid mode
• Connection panel with 2x mic/line combo inputs, 2x XLR outputs, PowerTwist input and output
• 18 mm Plywood housing
• Pole mounts with M20 threads
• Dimensions: 677 x 547 x 740 mm
• Weight: 42.6 kg
• Suitable protective cover available under Article Nr 409338 (not included)
• Suitable caster board available under Article Nr 409340 (not included)

• For Road Jack 10 mobile speakers
• Material: Nylon
• 5 mm thick padding
• Dimensions (W x H x D): 420 x 515 x 330 mm
• Colour: Black

• 2x Class A/B power amplifiers
• Protective circuits: Short circuit, Limiter, Overload
• 2x XLR + 2x RCA inputs
• Control unit: Power, Sub Level, Subwoofer Phase Reverse, Volume
• Ferrite tweeters and woofer
• 15 mm MDF housing with black structured paint finish
• M20 threaded flange
• Maximum level: 119 - 130 dB
• Suitable cover: Article no. 316254 (not included)

1 Subwoofer

• Equipped with: 12" Speaker
• Power: 300 W
• Frequency range: 40 - 150 Hz
• Dimensions: 450 x 515 x 520 mm
• Weight: 31.5 kg

2 Satellites

• Equipped with: 6.5" Speaker / 1" Tweeter
• Dispersion angle: 90° x 40°
• Power: 120 W
• Frequency range: 120 - 19000 Hz
• Dimensions: 250 x 400 x 250 mm
• Weight: 8.5 kg each

• Suitable for LD Systems G3
• Board with castors
• Strap
• 1 Protective cover for subwoofer
• 2 Protective covers for satellite
• Colour: Black

Bundle offer comprising

• Compact Plug and Play Array System
• For monitor and PA sound systems
• Discreet appearance for unobtrusive use
• DSP based multiband limiter
• Set consists of: 1x active subwoofer Curv500S, 1x active slave subwoofer Curv500SE, 2x Smartlink adapter and 8x array satellites
• Sound pressure level limit: 134 dB SPL max
• Power: 920 Watt RMS
• Frequency range: 47 - 20.000 Hz
• Beam angle: 110° horizontal x 10° vertical
• 10" Bass reflex subwoofer
• Integrated Class D power amplifier
• 3 Handles
• M20 Threaded flange
• Integrated 4 channel mixer with 4x XLR / jack combination input
• 2x XLR male out
• Integrated digital effect with 16 DFX presets
• Control for channel 1 and 2
• Adjustable low and high for channel 1 and 2
• Channel 3 with integrated Bluetooth receiver and 3.5 mm stereo jack input
• Adjustable sub level and main level
• Subwoofer dimensions: 325 x 383 x 491 mm
• Array satellite dimensions: 122 x 122 x 122 mm
• Smartlink adapter dimensions: 122 x 57 x 122 mm
• Subwoofer weight: 16.5 kg
• Array satellite weight: 1.7 kg
• Smartlink adapter weight: 0.6 kg
• Includes 2x speaker twist cable 2.2 m, 2x mains cable, 5-pin XLR system cable and 2x spacer rod
• Matching trolley: Article number 373612 (not included)
• Matching bag: Article number 373619 (not included)

• Transport Trolley
• For Curv 500 Subwoofer
• Material: Black nylon 1680D
• 10 mm padding
• Zipper
• 2 Handles
• Dimensions: 500 x 420 x 540 mm
• Weight: 0.9 kg

• Transport Bag
• Up to 4 Curv satellites and 2 Smart Link adapters
• Material: Black Nylon 1680D
• 10 mm padding
• Zipper
• Handle and shoulder strap
• Dimensions: 740 x 180 x 190 mm
• Weight: 1.3 kg

• 5-Pin XLR System Cable
• Suitable for Curv 500 systems
• Length: 10 m
• Colour: Black

• Condenser headset microphone MH3 in beige
• Directivity: Cardioid
• 9.5" 1U True Diversity Receiver
• Frequency band: 1785 - 1800 MHz
• Audio transmission range: 70 - 16,000 Hz
• 96 Channels in 8 groups a 12 channels
• Switchable transmission power: 2, 10, 30 mW
• Frequency scan in the receiver
• Automatic frequency scan with infrared transmission of the setting from the receiver to the transmitter
• Pilot tone
• Bright OLED display
• XLR and jack output
• BNC antenna connections
• Transmitter operation with 2 AA batteries or rechargeable batteries
• Receiver operation with 12-18 V DC power supply
• Includes 2 AA batteries, antennas, case and power supply

• Line mixer 8 in 2, and splitter 2 in 8
• 6 Mono inputs
• 2x XLR main inputs
• 2x XLR main outputs
• 4x XLR in/out
• 2x Stereo jack in/out
• Adjustable main on/out level
• Adjustable level and balance per channel
• Switchable splitter/mixer per channel
• LED level meter per channel
• Integrated power supply
• Maximum output level: + 22 dBu
• Frequency response: 5 - 40,000 Hz
• Nominal working level: -10 dBV to +4 dBu
• S/N Ratio: 85 dB
• Design: 19", 1 U
• Incl. power cord

• For Maui P900 sub-woofer
• Padded
• Water-repellent nylon
• 16 mm Thick lining
• Colour: Black

• Frequency range: 584-608 MHz
• 12 Selectable channels
• Wireless transmission for a range of up to 100m
• Up to 6 systems can be used simultaneously
• Frequency range: 50 - 16,000 Hz
• Stereo or mono mode
• Detachable antenna with BNC connector
• Bodypack has a runtime of 10 h with 2x AA batteries
• Includes earphones and a 19" rack mounting kit