Solid-State Bass Combos

• Black Edition: Limited series for the 35th anniversary of Eich Amplification
• Power: 500 W at 4 Ohm
• Power amplifier: Class D
• Speaker configuration: 1x 12" Eich TE12D (8 Ohm) ceramic speaker and CT1 4" cone mid/highrange driver
• Frequency range: 40 - 19,000 Hz
• Neutrik Combo Speaker Twist connector for external speaker
• Active 4-band tone control
• "Key" control
• Tuner output
• Mute switch
• Transformer-balanced DI (pre- and post-switchable) with ground lift switch
• Serial effects loop
• Line out
• Line in
• 3.5 mm Aux in
• 3.5 mm Headphone jack
• 115/230 V/AC switchable
• Internal speaker can be switched off
• Monitor function through attachable stainless steel support
• Dimensions (W x H x D): 44 x 45 x 35 cm
• Weight: 14.1 kg
• Made in Germany

• Power: 1000 Watt peak
• Components: 12" Turbo-sound loudspeakers
• Mosfet preamp
• Class D amplifier
• Adjustable and switchable compressor
• Controller for bass, mid-range, and treble centre frequency
• Ultra low switch
• Ultra high switch
• Mute switch
• -15 Db switch
• Gain control
• Master controller
• Connections for foot-switch
• FX Loop send & return
• Tuner (same line out)
• DI Out (XLR)
• Aux In (RCA)
• Wedge housing
• Dimensions (W x H x D): 480 x 401 x 396 mm
• Weight: 19.9 kg

• Class D
• Power: 100 W
• 1x 12" Eminence Special Design speaker
• 1x Jack input
• 1x Channel with switchable bright switch
• Contour, vintage switch and overdrive
• Controls: Gain, bright on/off, contour on/off, vintage on/off, drive, overdrive on/off, level, bass, low mid, high mid and treble
• Headphone connector
• Mini jack stereo AUX input
• Line out XLR with Ground Lift
• Effects loop send and return
• Soft touch radio potentiometer knobs
• Dimensions (HxWxD): 46.99 x 41.91 x 35.56 cm
• Weight: 9.97 kg
• Design: Black vinyl covering with silver front grill

Markbass MB58R CMD 151 Pure Combo, transistor combo for electric bass, Channels: 1, Output power: 500 W @ 4 ohms, 300 W @ 8 ohms, Speakers: 1x15" neodymium, Tweeter: Hi-Fi, Power handling speaker: 400 W, Speaker impedance: 8 ohms, Frequency range: 40 Hz- 20 kHz, Efficiency: 100 dB SPL, MB58R cabinet biodegradable, Controls: gain, line out, low, mid low, mid high, high, old school, master volume, Switches: pre/post EQ for line out, ground lift, mute switch, 3 way switch (flat, scooped mid, FSW), scooped mid LED, Connectors: Instrument Input, Return Effects, Send Effects, Line Out (XLR balanced) Speaker Out (Speakon jack, 2 jack sockets), BI- Band Limiter, Dimensions: (WxHxD) 45 cm x 57.6 cm x 47.1 cm, Weight 13.28 kg

• Power: 80 W (4 ohms)
• Equipped with: 12" Celestion loudspeaker (8 ohms), with horn
• TEC Circuit (Tube Emulating Circuit)
• Gain control
• Integrated compressor with LED display
• Boost function
• 3-Band EQ with parametric mid / highs
• Volume control
• Horn on / off switch
• Headphone outputs
• Aux input to play CD or MP3 playback tracks
• Balanced. DI output
• Effects loop
• External speaker output (8 ohms minimum)
• Dimensions: 510 x 510 x 354 mm
• Weight: 21 kg

• Power: 200 W @ 4 Ohm
• Speaker configuration: 1x 15" Custom Eminence Speaker
• Preamp with 3-band EQ
• Ultra-Hi and Ultra-Lo switch
• SGT Overdrive with Grit and Level control (Super Grit Technology)
• 1x 6.3 mm jack input 0dB and 1x 6.3 mm jack input -15dB
• Aux input
• Headphone jack
• XLR DI output
• Footswitch jack: 6.3 mm jack
• Effect loop send and return: 2x 6.3 mm jack
• Output for external speaker: 6.3 mm jack
• Dimensions: 513 x 570 x 354 mm
• Weight: 15.5 kg

• 70 Watt digital amplifier with DSP and professional features
• Dual amplifier architecture - one amplifier per speaker
• Solid-state design
• 2x 4" PJB Neo Power Type A speakers
• Class D amplifier circuitry with highly efficient Pulse Width Modulation (PWM)
• 3-Band equaliser with +/- 18 dB boost/cut per band
• Rectangular Auxiliary Frequency Radiator (RALFR)
• Enclosure with internal amplification and acoustic damping lining against sound colouration
• Impedance: 4 Ohm
• Loudspeaker designed using the KLIPPEL measurement system
• Frequency response: 60 - 15,000 Hz
• Controls for Input Level, Bass, Mid, Treble, Master Volume and Aux Level
• 3-Way toggle switch for mute / low / high and power switch
• Connectors: Input (6.3 mm mono jack) Aux Input (3.5 mm stereo jack), Headphone Output (3.5 mm stereo jack), Line Out (6.3 mm mono jack)
• IEC mains socket
• Input voltage: 90 - 240 V AC
• Dimensions (W x H x D): 280 x 203 x 172 mm
• Weight: 4 kg
• Colour: Black
• Includes power cable with EU plug

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

Markbass MB58R Mini CMD 121 P Combo, transistor combo for electric bass, channels: 1, output power: 500 W @ 4 ohms, 300 W @ 8 ohms, speaker: 1x12" ceramic, tweeter: piezo, speaker power handling: 300 W, speaker impedance: 8 ohms, frequency range: 45 Hz- 15 kHz, efficiency: 99 dB SPL, MB58R cabinet biodegradable, controls: Gain, Line Out, Low, Mid Low, Mid High, High, Old School, Master Volume, Switches: pre/post EQ for Line Out, Ground Lift, Mute Switch, 3 way switch (Flat, Scooped Mid, FSW), Scooped Mid LED, Connectors: Instrument Input, Return Effects, Send Effects, Line Out (XLR balanced) Speaker Out (Speakon jack, 2 jack sockets), BI- Band Limiter, Dimensions: (WxHxD) 39 cm x 47 cm x 36 cm, Weight 9.87 kg

• Power: 50 W
• Equipped with: 2x 3" speakers for a wide stereo sound
• Bluetooth allows wireless playback of music and remote control via app
• VET Modeling technology for authentic amp sounds
• Up to 17 amplifier models
• Up to 19 high-quality effect types
• "Tone Room" software for accessing all Adio functions
• AUX Input for spontaneous Jam inserts
• USB Connection for recording purposes
• "Acoustage" function for creating a virtual surround sound image
• Power supply via power supply (included) or AA batteries
• Battery operation of 8 hours in continuous operation
• Weight: 2.9 kg
• Includes download license for Jam Vox 3
• Optional suitable transport bag: Art.474570 (not included)

• Mini exercise bass amplifier with professional features
• Solid-state design
• Digital 70 W amplifier with DSP (Digital Signal Processing)
• Class D Amplifier Circuit with High-Efficiency Pulse Width Modulation (PWM)
• 3-Band equaliser with +/- 18 dB boost / cut per band
• Lightweight construction
• Rectangular Auxiliary Frequency Radiator (RALFR)
• Body with internal reinforcement and features for acoustic damping of tone colouring
• Equipped with: 2x 4" PJB Neo Power Type A Speaker
• Impedance: 4 Ohm
• Speaker designed using the KLIPPEL measurement system
• Frequency spectrum: 60 - 15,000 Hz
• Input Level, Bass, Mid, Treble controls
• Master Volume and AUX Level
• 3-Way toggle switch for Mute / Low / High
• Power switch
• Dual amplifier architecture - one amplifier per speaker
• Input: 6.3 mm mono jack
• AUX input: 3.5 mm stereo jack
• Headphone output: 3.5 mm stereo jack
• Line output: 6.3 mm mono jack
• IEC cold device socket
• Input voltage: 90 - 240 V AC
• Dimensions (W x H x D): 280 x 203 x 172 mm
• Weight: 4 kg
• Colour: Red
• Power cable with EU plug included

• Power: 60 Watt @ 4 Ohm
• Equipped with: 1 x 8" Custom Neodymium speaker
• Analogue power amplifier technology
• Digital mains switch, VPF (Variable Preshape Filter)
• External speaker output (min. 8 Ω)
• Input for CD/MP3-Player, iPod, etc. (3.5 mm mini jack), headphone connector (3.5 mm), line out (recording XLR balanced)
• Switch speaker on/off
• Switch ground lift
• Dimensions (W x H x D): 268 x 268 x 262 mm
• Weight: 6.6 kg

• Power: 500W at 4Ω
• Class D amplifier
• Loudspeakers: 2x 12" Eich TE12D (8 Ohm) ceramic speaker and 1x 4" CT1 tweeter diaphragm
• Frequency range: 40 - 19,000 Hz
• Speaker Twist connector for external loudspeaker
• Active 4-Band EQ
• Taste" controller
• Tuner output
• Mute switch
• Transformer balanced DI (pre/post switch) with ground lift switch
• Serial effects loop
• Line out
• Line in
• 3.5mm Aux-In
• 3.5 Mm headphone connector
• 115/230 V/AC switchable
• Internal speaker switchable
• 2 Sided "all access" handles
• Strap handle on top
• 2 Transport castors
• Dimensions (W x H x D): 44 x 75 x 41 cm
• Weight: 23.5 kg
• Made in Germany

• Power: 50 W
• Mounting: 6.5" custom voiced speakers
• Free control app for preset access, management and editing for Android
• USB interface for recording
• Firmware updates and editing under macOS and Windows
• Instrument input
• Foot-switchable looper and drum machine (MNP-2 footswitch included)
• IR toggle switch to activate cabinet impulse response signal in DI-out
• Support for third-party IRs
• Gain control
• Integrated reverb with decay and level control
• 3-Band equaliser: bass, parametric mids, treble
• Volume control
• Headphone output
• Aux input for play-along backing tracks from CD/MP3
• Balanced DI output
• Bluetooth audio stream
• Dimensions (W x H x D): 300 x 225 x 326
• Weight: 7.2 kg
• Incl. MNP-2 foot switch

• Power: 40 Watt
• 1 x 10" Speaker
• 1 x 2" Tweeter
• Passive and active input (also suitable for the simultaneous use of 2 instruments)
• 3-Band EQ
• Automatic compressor
• AUX input (3.5 mm)
• Headphone output (3.5 mm)
• Bass reflex housing
• Dimensions (W x H x D): 37 x 47 x 38 cm
• Weight: 16 kg

• Power: 10 W
• Equipment: 2x 5" Vox Bulldog loudspeaker
• The ideal exercise and recording combo with a distinctive sound Vox
• Controller for drive, Treble, Bass, Volume
• Bright switch
• Headphone / line output
• Dimensions (W x H x D): 380 x 277 x 170 mm
• Weight: 5.6 kg

Joyo MA-10B Portable Bass Amp, solid statecombo for bass guitar, channels: 2, power: 10 watts, equipped with: 5" customized full frequency speakers, cabinet construction: closed back, controls: Volume, Tone, Gain, switches: Normal / Drive, connections: Input (1/4" jack) - AUX Input - Headphone Output, Power supply via 6xAA battery or mains adapter, dimensions (W x D x H): 240 x 150 x 170 mm, (9,45" x 5,91" x 6,69"), weight: 1,3 kg (2,9 lbs), included: 9v 1200mA power adapter, colour: white

• SuperLight series
• Speaker: 1x 12" Custom Design Jensen/Sica
• Tweeter: 1" HF with a 3-position switch
• Power rating: 600 Watt RMS
• Impedance: 8 Ohm
• Dimensions: (W x H x D): 51 x 74 x 35 cm
• Weight: 9 kg
• Made in Italy

• Solid-State design
• Ultra-light and portable
• Power: 50 W RMS
• Class D amplifier circuit
• 3-Band equaliser with +/- 18 dB boost / cut per band
• Ventilated lightweight housing
• Speakers: 1x 7" PJB Ferrite A speaker and 3" PJB tweeter
• Impedance: 8 Ohm
• Frequency spectrum: 36 to 22,000 Hz
• Level, Bass, Mid, Treble, Master Volume and AUX Input Level controls
• 3-Way toggle switch for Mute / Low / High
• Power switch
• Input: 6.3 mm mono jack
• AUX input: 3.5 mm stereo jack
• Headphone output: 3.5 mm stereo jack
• Line output: 6.3 mm mono jack
• IEC cold device socket
• Input voltage: 100 - 240 V AC
• Dimensions (W x H x D): 305 x 246 x 249 mm
• Weight: 7 kg
• Power cable with EU plug included

• Power: 500 W @ 4 Ohm
• Speaker configuration: 2x 10" Custom Eminence speakers and HF horn (can be switched off)
• Preamp with 3-band EQ
• Ultra-Hi and Ultra-Lo switch
• SGT Overdrive with Grit and Level control (Super Grit Technology)
• 1x 6.3 mm Jack input 0dB and 1x 6.3 mm jack input -15dB
• Aux input
• Headphone jack
• XLR DI output
• Footswitch jack: 6.3 mm jack
• Effect loop send and return: 2x 6.3 mm jack
• Output for external speaker: 6.3 mm jack
• Dimensions: 513 x 654 x 354 mm
• Weight: 17.7 kg

• Power: 50 W @ 4 Ohm
• Speaker configuration: 1x 10" Ampeg Speaker
• Preamp with 3-band EQ
• SGT Overdrive with Grit and Level control (Super Grit Technology)
• 1x 6.3 mm jack input 0dB and 1x 6.3 mm jack input -15dB
• Aux input
• Headphone jack
• XLR DI output
• Dimensions: 481 x 411 x 330 mm
• Weight: 10.2 kg