Solid-State Bassheads

• 100 Watt @ 8 Ohm
• Solid-State
• 3 Band Tone Control
• 2 Inputs (0dB%-15dB)
• FX Loop
• Line Out, Line in & Headphone out
• Weight: 6,35 kg

Cabinet:

• 2 x 10" Speakers
• 100 Watt @ 8 Ohm
• Frequency response: 57 Hz - 5 kHz
• Weight: 15 kg

• Class A stage input
• Switchable power on the back side: 700 W at 4 ohms, 380 W at 8 ohms, 700 W to 2.7 Ohm, 470 W at 4 ohms and 240 W at 8 ohms
• Switchable EQ
• 4-Fold with 2 EQ switchable centre frequencies
• Peak indicator LED
• Drive-section with switchable voicing filters
• Effect Return mono or stereo MP3 Input
• Balanced DI out Pre / Post (level switchable)
• Tuner Out
• Headphone output
• Parallel effects adjustable
• Post-EQ
• Tuner / Drive / effect loop foot-switchable
• Weight: 3.4 kg
• Dimensions (L x W x T) x 320 260 x 63 mm, 2 U

• Compact and light
• Transistor circuit
• Class D power amplifier
• Power: 200 W at 4 ohms / 130 W at 8 ohms
• 3-Band EQ with +/- 15 dB cut / boost per band
• 6.35 mm Headphone output for silent practice
• Balanced Post-EQ XLR DI output with switchable ground lift
• Input impedance of more than 10 MOhm offers maximum sensitivity for passive pickups
• USB audio interface for PC, MAC or compatible mobile devices - no drivers or special software required
• Supported sampling rates: 44.1 kHz and 48 kHz
• Front controls for gain, bass, middle, treble, master
• Rear ground lift switch
• Rear power on / off switch
• Front connections for instrument input (6.35 mm mono jack) and headphone output (6.35 mm stereo jack)
• Rear connections for Mains In (IEC IEC socket), Speaker Out (6.35 mm mono jack), USB Type-B connection and balanced XLR DI output
• Input voltage 220 - 240V AC
• Dimensions (L x W x H): 170 x 118 x 45.5 mm
• Weight: 0.98 kg
• Includes power cable with EU plug

Note: Register your product at https://shop.warwick.de/en/warrantyregistration and extend the guarantee to 4 years.

• Power (RMS): 800 W
• Impedance: 4 Ohm
• Controls: Gain, Low, Mid Low, Mid High, High, Volume DI, Headphones Volume
• Master volume
• 3 Selectable frequencies for mid low: 185, 375, 800 Hz
• 3 Selectable frequencies for mid high: 600, 1200, 1800 Hz
• Deep and Bright Boost switches on each channel
• Pure Sound switch (EQ Bypass)
• Switchable LED/Fan Mode
• Mute switch
• Ground lift, DI pre/post and power switch on the back
• Effects loop: Serial
• Front connectors: Input, aux in, headphones out
• Rear connectors: FX Loop (Send, Return), XLR DI-Out
• Dimensions (W x D x H): 265 x 220 x 58 mm
• Weight: 2.2 kg
• Colour: Black
• Made in Italy

• 1 Channel
• Power: 300 W RMS @ 4 Ohm, 150 W RMS @ 8 Ohm
• Controls: Gain, Low, Mid Low, Mid High, High, Old School, Line Out, Master
• 3-way switch: Flat/Scooped-mid/FSW
• Pre/Post EQ
• Ground Lift
• Input: 6.3 mm jack
• Foot switch: 6.3 mm jack
• Balanced XLR
• Return / Send: 2 x 6.3 mm jack
• Tuner output: 6.3 mm jack
• Class 2 Wiring
• Loudspeaker outputs: Combo jack Speakon/jack
• Dimensions (W x D x H): 276 x 255 x 83 mm
• Weight: 2.8 kg

• Clean and easy to use amplifier
• New "Powered Platform" concept allows the amp to be used as a multi-effects unit - signal chains can be saved to presets from a constantly growing DSP database with compressors, distortions, modulations, preamps, impulse responses etc.
• 1 Channel
• Power: 500 watts
• Controls: Input, Bass, Low-Mids, High-Mids, High, Blend, Master
• Switches: Preset, Mute, Ground lift, On/Off
• Effect loop-in
• Dimensions (W x D x H): 210 x 175 x 6 mm
• Weight: 1.7 kg
• Made in Finland

Connections:

• Input: 6.3 mm jack
• MIDI In:
• DI Out: XLR
• FX send & return: 2x 6.3 mm jack
• Headphone output: 6.3 mm stereo jack
• USB-C connector
• Speaker outputs: 6.3 mm jack / Speaker Twist combo jacks

• Power: 300 W @ 4 Ohm
• Active 3-Band EQ with Shape function
• Drive/Gain/Compressor controls
• Mute function
• Active/passive input function
• AUX in
• Headphone output
• Balanced XLR DI output
• Jack and Speaker Twist outputs
• Dimensions: 161 x 365 x 273 mm
• Weight: 2.3 kg

• Class D Amplifier
• Power: 800 W @ 4 Ohm
• 2 Channels
• 3 Tone switches: Bright On/Off, Contour On/Off, Vintage On/Off
• Drive
• Overdrive On/Off
• 4-Band EQ
• Effect loop
• XLR DI output
• 2 Speaker Twist/jack outputs
• Stereo AUX in
• Headphone output
• Foot switch included

• Power: 2x 500W into 2Ω, 1000W bridged into 4Ω (Speaker Twist)
• Class D amplifier
• Active 4-band EQ
• Taste" controller
• Tuner output
• Mute switch
• Transformer balanced DI (pre- & post switchable) with ground lift
• Adjustable serial effects
• Line out
• Adjustable line in
• 3.5 mm AUX in
• 3.5 mm headphone socket
• Adjustable compressor with "Attack Time" switch
• "Bass Boost" and "Hi Boost" switch
• "Mute" & "Compressor" -foot switch port
• CH-B with 200 Hz "Lo Pass" filter and +12 dB "Sub-Boost
• Digital, super quiet fan control with "DAS" (Direct Airflow System) for better cooling
• "Magnet Fixpins" for locking on oak cabinets
• 115/230 V/AC switchable
• Dimensions (W x H x D): 27 x 8 x 25 cm
• Weight: 2.4 kg
• 19" rack ears included
• Made in Germany
• Matching Softbag (SB2) available (not included)

• 1 Channel
• Power: 500 Watt RMS @ 4 Ohm, 300 Watt RMS @ 8 Ohm
• Frequency response: 45 - 20000 Hz
• Controls: Gain, Low, Mid Low, Mid High, High, Old School, Line Out, Master
• 3-Way switch: Flat / Scooped-mid / FSW
• Input: 6.3 mm jack
• Footswitch connection: 6.3 mm jack
• Balanced line output: XLR
• Effect return & send: 2x 6.3 mm jack
• Tuner output: 6.3 mm jack
• Weight: approx. 2.8 kg
• Dimensions (W x H x D): approx. 27.6 x 8.3 x 25.5 cm

• Black Edition - Limited series for the 35th anniversary of Eich Amplification
• Power: 500W into 4 Ohm, 300W into 8 Ohm
• Class-D power amplifier
• Active 4-band tone control
• "Taste" control
• Tuner output
• Mute switch
• Transformer balanced DI (pre- & post switchable) with ground lift
• Serial effect path
• Line output
• Line input
• Aux input: 3.5 mm jack
• Headphone jack: 3.5 mm jack
• Loudspeaker output: Speaker Twist
• 115/230 V/AC switchable
• Dimensions (W x H x D): 27 x 4.5 x 21 cm
• Weight: 1.49 kg
• Made in Germany
• Matching 19" rack bracket and soft bag available (not included)

• Solid-state design
• Power: 800W @ 4Ohm, 400W @ 8Ohm
• Sub Sonic Filter to reduce unnecessary movement of the speaker diaphragm
• Noiseless cooling without fan
• Class A low noise preamplifier
• Class D amplifier
• 5-Band equaliser with +/- 18 dB boost / cut per band
• Serial effects loop
• Front panel controls for Lo-Bass, Hi-Bass, Mid, Lo-Treble, Hi-Treble, Input Level, AUX Level and Volume
• Front 3-way toggle switch for Mute / Active / Passive
• Back Pre / Post EQ toggle switch
• Rear ground / lift switch
• Power switch
• Front-side instrument input: 6.3 mm mono jack
• Front-side AUX input: 3.5 mm stereo jack
• Front-side headphone output: 3.5 mm stereo jack
• Back-side line input: 6.3 mm mono jack
• Back-side line output: 6.3 mm mono jack
• Back-side DI output: XLR
• FX send and return: 2 x 6.3 mm mono jack
• Tuner output: 6.3 mm mono jack
• Pre-amp output: 6.3 mm mono jack
• Speaker output: Neutrik Speaker Twist 2-pin
• IEC (cold device connector)
• Input voltage: 100 / 240V AC
• Aluminium housing
• Dimensions (W x H x D) 191 x 330 x 71 mm
• Weight: 2.7 kg
• Power cable with EU plug included

• High end technology
• Ultra-compact housing
• 2 Channels
• Power: 800 Watts at 4 Ohm and 2.67 Ohm, 400 W at 8 Ohm
• Class D power amplifier
• The power adapter works at 100 to 240V
• Instrument input with mute function and switch for reduction to -8.5 dB
• Clean channel with volume knob
• Drive channel with gain and volume controls
• Active 3-band equaliser with parametric mids
• Contour Control with 2 variable pre-shape contour curves
• Master volume knob
• XLR Direct Out with Mic / Line Switch
• Pre / Post EQ Switch
• Ground lift
• AUX input
• Headphone output
• 2 Speaker twist speaker outputs
• Impedance selector switch: 8/4 Or 2.67 Ohm
• Dimensions (H x W x D): 76 x 286 x 267 mm
• Weight: 3.8 kg

• Active 4-Band EQ
• "Button" controller
• Tuner output
• Mute switch
• Transformer balanced DI (pre- & post switchable) with ground lift
• Serial effects loop
• Line out
• Line in
• 3.5mm AUX-in
• 3.5mm Earphone connector
• Power: 300W at 4Ω, 200W at 8Ω (Speaker Twist)
• Class D amplifier
• 115/230 V/AC switchable
• Dimensions (W x H x D): 27 x 4.5 x 21 cm
• Weight: 1.27 kg
• Made in Germany

• Limited series for the 35th anniversary of Eich Amplification
• 1000W transistor
• Class-D power amplifier
• Power: 2x 500W at 2 Ohm, 1000W at 4 Ohm bridged
• Active 4-band tone control
• "Taste" control
• Adjustable compressor with attack time switch
• Bass Boost and Hi Boost switch
• Footswitch connection for mute and compressor functions
• CH-B with 200 Hz Lo Pass Filter and +12 dB Sub-Boost
• Tuner output
• Mute switch
• Transformer-balanced DI output, pre and post switchable with ground lift
• Adjustable serial effects loop
• Line out
• Adjustable line in
• 3.5 mm Jack aux input
• 3.5 mm Jack headphone output
• Digital, super-quiet fan control with "DAS" (Direct Airflow System) for better cooling
• "Magnet Fixpins" for locking on calibration cabinets
• Speaker Twist speaker output
• 115/230 V/AC switchable
• Dimensions (WxHxD): 27 x 8 x 25 cm
• Weight: 2.4 kg
• Includes 19" rack bracket
• Matching soft bag (SB2) optionally available
• Made in Germany

• Power: 200 watts at 4 ohms and 130 watts at 8 ohms
• Input Level with signal level display
• Ultra-high input impedance precursor especially for passive basses
• 3-Band EQ filters for classical trace-sound
• Post EQ XLR DI output
• Ground Lift switch
• Headphone output: 6.35 mm
• Dimensions (H x W x D): 3.4 x 17.1 x 10.4 cm
• Weight: 0.73 kg
• Incl. Trace-Elliot nylon carrying case

• 1 Channel
• Power: 900W
• Analogue preamplifier with switchable vintage microtubes and microtube B3K drive circuits
• Latency compensated post DI with digital speaker simulation
• Headphone output with speaker simulation
• Three impulse response slots, selectable via Cab select switch
• Adjustable VCA compression in studio quality
• Controls: Comp, Drive, Level, Tone, Blend, Gain, Master, 6-Band EQ, Headphone Volume
• Switch: Input Passive/Active, Microtubes, VMT/B3K Drive Circuit, Mute, Impedance 4/2 Ωs, Gnd. > Lift, Cab Select
• Input (6.3 mm jack)
• DI out (XLR)
• FX Send & Return (2x 6.3 mm jack)
• AUX In (3.5 mm stereo jack)
• Headphone output (6.3 mm stereo jack)
• Pre & Post DI Out (2 x XLR)
• MIDI in
• Footswitch input (6.3 mm jack)
• Micro USB
• Dimensions (W x D x H): 267 x 254 x 70 mm
• Weight: 2.9 kg
• Incl. Intelligent foot switch
• Made in Finland

• Power (RMS): 350 W
• Impedance: 4 Ohm
• Controls: Gain, Low, Mid Low, Mid High, High, Volume DI, Headphones Volume
• Master volume
• 3 Selectable frequencies for mid low: 185, 375, 800 Hz
• 3 Selectable frequencies for mid high: 600, 1200, 1800 Hz
• Deep and Bright Boost switches on each channel
• Pure Sound switch (EQ Bypass)
• Switchable LED/Fan Mode
• Mute switch
• Ground lift, DI Pre/Post and power switch on the back
• Effects loop: Serial
• Front connectors: Input, aux in, headphones out
• Rear connectors: FX Loop (Send, Return), XLR DI-Out
• Dimensions (W x D x H): 265 x 220 x 58 mm
• Weight: 1.6 kg
• Colour: Black
• Made in Italy

• Packed with powerful functions for direct connection to PA and recording consoles
• Combined with a powerful small power amplifier with enough volume for rehearsals and small gigs
• 1 Channel
• Power: 45 W @ 4 Ohm, 33 W @ 8 Ohm, 17 W @ 16 Ohm
• Controls: Master, Depth, Woof, Snap, Gain
• Switch: Line Out/Headphone, Bass Type, FR/VINT
• Speaker output: 1x 6.3 mm jack
• Input: 6.3 mm jack socket
• FX Loop Send & Return: 2 x 6.3 mm jack
• Balanced Line Out / Headphone: 6.3 mm stereo jack
• Dimensions: (W x D x H): 10.2 x 12.7 x 4.4 cm
• Weight: 300 g
• Includes universal 24 V DC power adapter that takes AC voltages from 100 to 250 V.