Solid-State Guitar Heads

• 3 Classic US amp voicings: '60 Tweed, '62 Blonde and '65 Black
• Comparable power to a 25-watt tube amp with the included PS-24 power supply or 1-watt low-power mode with a conventional 9V power supply
• 2 Cab sims and 1 FRFR mode on XLR and headphone output
• Limiter
• Reverb
• Effect Loop
• 1 Channel
• Power: 25 W
• Controls: Gain, Limiter, Bass, Mid, Treble, Reverb, Master
• Switch: Power: On/Stby/Off
• Cab Sim: Brt/Norm/FRFR
• Voice: 60 Tweed / 62 Blonde / 65 Black
• Speaker outputs: 4-16 Ohm (6.3 mm jack)
• Input: 6.3 mm jack
• FX send / return: 2 x 6.3 mm jack
• Phones: 3.5 mm stereo jack
• Line output: XLR
• Dimensions (W x D x H): 165 x 108 x 38.1 mm
• Weight: 0.610 kg
• Includes power supply 24 V DC / 3.0 A

• Bluetooth connectivity: connect any Bluetooth-enabled device and play music through the BantamP
• 2 Channels: Clean and Overdrive
• Sound characteristics: British Class-A combo
• Power: 20 W
• Preamp with a single 12AX7 tube
• Class-D power amp
• Controls: Gain, Tone and Volume
• Switches: Clean / OD - Bluetooth - Power
• Serial FX loop
• Send & return
• 2x 6.3 mm jack
• Bluetooth on / off switch (to receive a Bluetooth signal)
• Speaker output: 1x 6.3 mm jack, min. 8 ohm
• Headphone output via 3.5 mm stereo mini jack
• Dimensions: 163 x 110 x 140 mm
• Weight: 1.2 kg
• Colour: Green / Black
• Incl. power supply
• Corresponding gig bag: Article Nr 424836 (not included)

• Compact amplifier for gaming situations in which no high-performance amplifier is required
• Can be used alone or with a distortion pedal, EQ and / or preamp
• 1 Channel
• Power: 2.5 watts
• Controller: Volume
• Switch: Bright / Norm
• Input: 6.3 mm jack
• 6.3 mm Jack speaker outputs 8-16 ohms
• Dimensions (W x D x H): 70 x 114 x 51 mm
• Weight: 640 g
• Includes 9 V DC power supply

• Power: 5 W
• Vintage American Sound
• Class A/B
• Control for volume and gain
• 3-Band EQ
• FX Loop; jack 6.3 mm
• Loudspeaker output: Jack 6.3 mm
• Impedance: 4 - 16 Ohm
• Headphone output: Jack 3.5 mm
• AUX IN: Jack 3.5 mm
• Dimensions (H x W x D): 59.9 x 128 x 75 mm
• Weight: 440 g
• Incl. 18 V DC power supply (centre negative)

• Ideal for metal and high gain sounds
• Spirit Tone Generator technology
• Completely analogue sound generation
• Nano head with up to 50 watts into 4 ohms
• Sagging control for power amp saturation independent of volume level
• Headphone output with RedBox emulation of the TubeMeister18
• Unfiltered line-out as ideal basis for the use of software cab sims
• Transport-friendly miniature format
• Channels: 1
• Power: 50 watts
• Controls: Master, Sagging, Tone, Gain
• Loudspeaker outputs: min. 4 Ohm (2 x 6.3 mm jack)
• Instrument input: 6.3 mm jack)
• Aux input: 3.5 mm stereo jack
• Headphone connection: 6.3 mm stereo jack
• Dimensions (W x D x H): 190 x 90 x 90 mm
• Weight: approx. 1.1 kg incl. power supply unit (725 g without power supply unit)

• With transistor amplifier
• Ideal for rock and lead sounds
• Completely analogue sound generation
• 1 Channel
• Power: 50 watts into 4 ohms
• Spirit Tone Generator technology
• Sagging control for power amp saturation independent of volume level
• Headphone output with RedBox emulation of the TubeMeister18
• Unfiltered line-out as basis for the use of software cab sims
• Transport-friendly miniature format
• Weight: approx. 1.1 kg incl. power supply - 725g without power supply
• Controls: Master, Sagging, Tone, Gain
• 2x 6.3 mm Jack speaker outputs: min. 4 Ohm
• 6.3 mm Jack input
• 3.5 mm Stereo jack Aux input
• 6.3 mm Stereo jack headphone output
• Dimensions (W x D x H): 190 x 90 x 90 mm
• Weight: 1.1 kg

• 1 Channel
• Power: 60W @ 4 Ohm, 30W @ 8 Ohm, 15W @ 16 Ohm
• Compact and light guitar amp for live & recording
• Specially designed for use with effect pedals
• Robust and durable with built-in short-circuit and overheating protection
• Latest Class-D technology and high-quality components
• Fits easily on a pedalboard or in a gig bag
• DI output with switchable speaker simulator
• Can also be used without a connected speaker
• Controls: Volume, Bass, Middle, Treble, Presence
• Switches: Bright, Equaliser, Cab Sim, Gnd Lift
• Speaker output: 6.3 mm jack (4 - 16 Ohm)
• Input: 6.3 mm jack
• Line out: XLR
• Dimensions (W x D x H): 95 x 120 x 50 mm
• Weight: 0.8 kg
• Includes universal 24 V DC power supply (accepts voltages from 100 - 240 VAC)
• Made in Bulgaria

But what if you want to take your own favorite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.

Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favorite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.

• Power rack version with 600 watt class D amplifier
• Power: 600 watts into 8 ohms, 300 watts into 16 ohm
• Format: 19 "/ 3 HE
• Dimensions (W x H x D): 48.3 x 13.9 x 22 cm (as the rubber feet should not be removed for ventilation reasons, a min. 4 U rack is required)
• Weight: 6.18 kg
• Colour: Black

Collections:

• Mic input
• Line In
• Alternative input
• Direct Out
• Monitor Out
• Master Out (jack & XLR)
• S / PDIF digital input and output
• Midi In / Out / Thru
• 2 x Footswitch (jack)
• Network and USB

• Based on the Spirit Tone Generator Technology
• Power: 50 W to 4 ohms, 25 W at 8 ohms, 12.5 W at 16 ohms
• 2 Independent channels
• Channel 1: Complete Spectrum of American and British Vintage Clean and Blues Sounds
• Channel 2: classic rock sounds of the 70s and 80s
• Controls: Gain, Tone, Presence, Resonance, Sagging, Volume per Channel
• Boost, foot-switchable (status per channel storable)
• Serial FX Loop, foot-switchable (status per channel storable)
• Solo controller, foot-switchable (0 to +6 dB level lift opposite the master)
• IDB-NoiseGate from Black-Spirit 200 (setting per channel storable)
• Red Box AE + with 8 Speaker Emulations from Black Spirit 200 (selection per channel storable)
• Separately controllable headphone output 3.5 mm stereo
• Controllable AUX input
• Balanced XLR output for Cabinet emulation
• Dimensions AMP (W x H x D): 250 x 52 x 153 mm
• Weight amp: 2.3 kg
• Dimensions power supply (W x H x D): 129 x 32 x 52 mm
• Weight power supply: 280 g /127lbs

• 2 Channels
• Power: 100 W
• Clean channel: Volume, Bass and Treble
• Dirty channel: Volume, Bass, Middle, Treble and Gain
• Master: Volume and Reverb
• Effects: Reverb
• Serial FX loop
• Speaker outputs: 1 x 16 Ohm and 1 x 16/8 Ohm
• Input: 6.3 mm jack
• FX send / return: 2x 6.3 mm jack
• Connection for footswitch: 6.3 mm jack
• CabSim: XLR
• Dimensions (W x D x H): 55 x 25 x 23 mm
• Weight: 13.8 kg
• Colour: Orange

• 15 W Class-D power amplifier
• 25 High quality amplifier models
• 20 IR (Impulse Response) speaker simulations
• 10 Modulation effects
• 5 Delay types
• 6 Reverb types
• Integrated guitar tuner
• LC display
• 99 Programmable presets
• Serial effect loop
• Bluetooth connection for aux input
• Bass, middle, treble, gain and master volume controls
• Control buttons for play, tuner, save, amp, cab, mod, dly and rev
• 4 Quick recall buttons (A / B / C / D)
• Power toggle switch
• 6.3 mm Mono jack input
• 6.3 mm Mono jack speaker output (at least 4 ohms)
• 2 x 6.3 mm Mono-jack send / return
• 3.5mm Stereo jack headphone output
• 3.5mm Stereo jack Aux-In
• Power supply via 18 V DC power supply (2.1 x 5.5 mm barrel connector, polarity (-) inside) Battery operation not supported
• Power consumption 1.2 A
• Dimensions (L x W x H): 186 x 97 x 76 mm
• Weight 670g
• Includes power supply

But what if you want to take your own favourite sounds instead of the manufacturer's sound specifications? Prior to the release of the Kemper Profiling Amp, there were not many alternatives: either, as before the digital revolution, they dragged their entire equipment from place to place, or tried to adapt the modeled sounds of the modeling amp as far as possible to their own desires.

Kemper breaks new ground here. Instead of using predefined emulation of different amplifier models, the Profiling Amp (Nomen est Omen) creates an exact image of the sound set on the amplifier together with the connected speaker and microphone. This combines all the personal favourite sounds in one device. In addition, the sound profile can be edited with various floor effect emulations, master effects, equalizer, and so on. A separate amp fleet is not a mandatory requirement, because the Profiling Amplifier is already equipped with a large number of classic amplifier profiles. In addition, a large Kemper community has now established itself in the world where sound profiles are exchanged over the Internet.

• Powerhead version with 600 watt class D amplifier
• 600 watts into 8 ohms, 300 watts into 16 ohm
• Dimensions (W x H x D): 37.8 x 21.7 x 17.3 cm
• Weight: 6.5 kg
• Colour: Black

Connections:

• Mic input
• Line In
• Alternative input
• Direct out
• Monitor out
• Master out (Jack & XLR)
• S / PDIF digital input and output
• Midi In / Out / Thru
• 2 x footswitch (jack)
• Network & USB

Bundle offer comprising

• Kemper Profiling Amplifier Power Rack + Remote Control

Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.

• Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm)
• Dimensions (W x H x D): 483 x 139 x 220 mm, 19"/ 3 U
• Weight: 5.5 kg
• Format: 19"/ 3 U (since the rubber feet should not be removed for ventilation reasons, a min. 4 U rack is required)
• Colour: Black
• Incl. remote control base board

Connectors:

• Mic Input
• Line In
• Alternative Input
• Direct Out
• Monitor Out
• Master Out (jack & XLR)
• S/PDIF digital input and output
• MIDI In / Out / Thru
• 2x Foot switches (jack)
• Network
• USB

• Transport Case
• Suitable for Kemper Profiling Amp Rack BK Set (Kemper Profiling Amplifier Rack BK + Remote Control)
• Made of 7 mm birch plywood
• Phenolic resin coating
• 22 x 22 mm aluminium profile
• 4 Mini butterfly latches
• 2 Folding handles
• 4 Rubber feet
• Steel ball corners
• Additional compartment for remote control
• Foam padding throughout the case
• Dimensions (L x W x H): 550 x 475 x 290 mm
• Weight: 10.8 kg
• Made in Germany

• Product Guide
• Guide to the Kemper Profiler
• Thomann Special Edition
• By Chris Reiss
• DIN A5
• Reversible booklet in German (58 pages) and English (56 pages) language

• With transistor amplifier
• Ideal for clean, blues and crunch sounds
• Completely analogue sound generation
• Transport-friendly miniature format
• 1 Channel
• Power: 50 watts into 4 ohms
• Spirit Tone Generator technology
• Controls: Master, Sagging, Tone, Gain
• Sagging control for power amp saturation independent of volume level
• Unfiltered line-out as basis for the use of software cab sims
• 2x 6.3 mm Jack speaker outputs: min. 4 Ohm
• 6.3 mm Jack input
• 3.5 mm stereo jack aux input
• 6.3 mm Stereo jack headphone output with RedBox emulation of TubeMeister18
• Dimensions (W x D x H): 190 x 90 x 90 mm
• Weight incl. power supply: approx. 1.1 kg - 725g without power supply

• 3 Classic UK amp voicings: JMP, AC Normal and AC Top Boost
• Comparable power to a 25 watt tube amp with the included PS-24 power supply or 1 watt low power mode with a conventional 9 V power supply
• 2 Cab Sims and 1 FRFR mode on XLR and headphone output
• Limiter
• Reverb
• Effect Loop
• 1 Channel
• Power: 25 W
• Controls: Gain, Limiter, Bass, Mid, Treble, Reverb, Master
• Switch: Power: On/Stby/Off
• Cab Sim: Brt/Norm/FRFR
• Voice: 1979 JMP / AC Norm / AC Top
• Speaker outputs: 4-16 Ohm (6.3 mm jack)
• Input: 6.3 mm jack
• FX Send / Return: 2 x 6.3 mm jack
• Phones: 3.5 mm stereo jack
• Line output: XLR
• Dimensions (W x D x H): 165 x 108 x 38.1 mm
• Weight: 0.610 kg
• Includes power supply 24 V DC / 3.0 A

• Channels: 2
• Power: 200 watts
• Each channel offers six different voicings (1957, 1961, 1965, Plexi, Sweet & Top Bst)
• Versatile channel routing options: switch one instrument between channels, choose between two instruments or use both inputs simultaneously (each input is routed to the respective channel only)
• Built-in speaker simulation for live & recording miking without a microphone
• Controls per channel: Voice, Gain, Limit, Distortion Boost, Bass, Mid, Treb, Ch. Out
• Global controls: Reverb Mix & Swell, Tremolo Depth & Rate,
• Speaker Vol, Sig Out (Line & Headphones)
• Switch: Ch. Select, Cab Sim
• Speaker outputs: 4-16 Ohm (2 x 6.3 mm jack)
• Input: 6.3 mm jack
• FX Send & Return: 2x 6.3 mm jack
• Sig Out: 6.3 mm stereo jack
• Headphone connection: 3.5 mm stereo jack
• Foot switch connection: 6.3 mm jack
• Dimensions (W x D x H): 432 x 142 x 89 mm
• Weight: 1.9 kg
• Includes protective cover
• Matching footswitch Quilter UFC-3: Art.488400 (not included in delivery)

Kemper Profiling technology allows the creation of a very precise tonal image (profile) of an existing amplifier configuration (including speaker & miking). Thanks to the many internal editing options, such as: diverse effects unit emulations (up to 4 simultaneously), master effects, EQ, gain, amp definition, power sagging etc., you can edit the sound created far beyond the capabilities of the original amplifier. The Kemper Profiling Amplifier comes with an already large number of outstanding amplifier profiles, which is why the creation of individual ones is not mandatory. Thus it is now possible to map the sound of your own amplifier accurately, and if desired, to modify and have available to practice in the studio or on stage without a lot of lugging about.

• Incl. 600 W class D power amplifier (600 W at 8 ohm, 300 W at 16 ohm)
• Dimensions (W x H x D): 483 x 139 x 220 mm, 19"/ 3 U
• Weight: 5.5 kg
• Format: 19"/ 3 U (since the rubber feet should not be removed for ventilation reasons, a min. 4 U rack is required)
• Colour: Black
• Incl. remote control base board

Connectors:

• Mic Input
• Line In
• Alternative Input
• Direct Out
• Monitor Out
• Master Out (jack & XLR)
• S/PDIF digital input and output
• MIDI In / Out / Thru
• 2x Foot switches (jack)
• Network
• USB

• Class A / B solid-state amplifier
• 1 Channel
• Power: 100 watts
• Speaker outputs: 2 x jack, min. Total 8 ohms
• Dimensions (W x H x D): 30 x 7.7 x 19.5 cm
• Weight: 3.2 kg
• Colour: Orange

• Produces the classic rock and blues sound of the 20th century
• Bluetooth function can play music from external source in addition to guitar signal
• Channels: 2
• Power: 20 watts
• Preamp tubes: 12AX7
• Controls: 2x gain, 2x voice, 2x tone, 2x volume
• Switch: Ch1/Ch2, Bluetooth
• Speaker output 8 Ohm: 6.3 mm jack
• Input: 6.3 mm jack
• FX Send & Return: 2x 6.3 mm jack
• Headphone jack: 3.5 mm stereo jack
• Footswitch connection: 6.3 mm jack
• Dimensions (W x D x H): 163 x 140 x 110 mm
• Weight: 1.3 kg
• Includes power supply unit and footswitch