Electric Guitar Power Amps

• Lightweight Class-D technology with switch-mode power supply
• 2x 200 W @ 4 Ohm
• 2x 100 W @ 8 Ohm
• 2x 50 W @ 16 Ohm
• Bridged 400 W @ 8 Ohm and 200 W @ 16 Ohm
• Frequency range: 20 Hz - 20 kHz
• Input sensitivity: 335 mV
• Damping factor: > 80
• Signal- noise ratio: > 90 dB
• Total harmonic distortion (thd):
• Power consumption: 18 W (standby current)
• Dimensions (W x D x H): 482 x 250 x 44 mm
• Format: 19"/ 1 HE
• Weight: 3 kg

• Suitable for amplifying effect pedals
• Small enough for pedalboards
• Power: 170 W at 4 Ohms
• 3-Band EQ
• 13 dB boost/cut in each frequency band
• Controls for volume, bass, mid and treble
• Power switch on the back
• 1/4" mono-jack input/output on the back
• Cold device plug on the back
• Power status LED
• Temperature status LED
• O.C. status LED
• Output impedance: 4-16 Ohms
• Input voltage: 220-240V AC
• Dimensions (L x W x H): 127 x 133 x 72 mm
• Weight: 910 g
• Made in USA

• Specially developed for the Synergy system
• Developed by Steven Fryette
• Power: 2 x 50 W / 100 W mono
• Tube assembly: 2 x 12AX7 and 4 x 6L6
• Impedance: 4/8/16 ohms (stereo), 2/4/8 (mono)
• 2 Latch inputs
• 4 Jack outputs
• Each channel with its own volume control
• Global presence and depth control
• 2 Fan system
• Rack format
• Made in USA

• Easy-to-use power attenuator for volume control of high-performance tube amplifiers without the disadvantages of a conventional attenuator
• Two remote-controlled, foot-switchable controls on the front for volume, presence and depth for maximum flexibility during live performances
• Powerful mono block with 100 W from 2 KT88 tubes for incomparable response and dynamic range
• Active safety bypass function deactivates the internal power amplifier and maintains the critical load of the amplifier if the loudspeaker output socket is accidentally unplugged
• Output power: 100 watts at 2/4, 8 and 16 ohms
• Tubes: 1 x 12AX7, 2 x KT88
• Power consumption (max.continuous): 200 W @ 2/4 Ohm, 150 W @ 8 Ohm, 200 W @ 16 Ohm
• Channel A slider: Volume, Presence & Depth
• Channel B slider: Volume, Presence & Depth
• Balanced line output with level control: XLR
• Unbalanced line output 6.3 mm jack
• FX Send & Return: 2x 6.3 mm jack
• Speaker output: 6.3 mm jack
• Remote foot switch socket: 6.3 mm stereo jack
• Dimensions (W x H x D): 355 x 91x 228 mm
• Weight: 7.3 kg

Switches:

• Channel A / B
• Hi / Lo input level
• Treble Response (Flat / Brite / Edge)
• Low Frequency Response (Presence / Bass)
• Bypass (standby)
• Amplifier impedance: 2/4, 8 or 16 ohms
• FX level Hi / Lo
• Speaker impedance: 2/4, 8 or 16 ohms
• Ground lift

Connections:

• Balanced line output with level control (XLR)
• Unbalanced line output 6.3 mm jack
• FX-Send & return (2 x 6.3 mm jack)
• Speaker output (6.3 mm jack)
• Remote footswitch (6.3 mm stereo jack)
• Dimensions (W x H x D): 355 x 91x 228 mm
• Weight: 7.3 kg

• Especially for electric guitar
• Output Power: 2 x 200 W @ 4 Ohm, 2x 100W bridged @ 8 Ohm: 1x 400W @ 8 Ohm
• Class D dynamic circuit
• Frequency range: 20 - 20,000 Hz
• Protection: soft start, short-circuit, DC, overheating, overvoltage
• Controls: on/ off, volume, high, low, mode (bridge/ parallel/ stereo), ground lift, limiter sensitivity
• Line input: 2x XLR and 2x 6.3 mm jack
• Speaker output: 2x speaker twist and 3x 6.3 mm jack
• Dimensions (W x H x D): 482 x 44 x 244 mm

• Power: 200 watts into 4 ohms
• Suitable for operation of guitar cabinets with 4-16 ohms
• Suitable for connection directly after effects units
• Cab Sim and EQ can be switched on and off for headphone output and balanced out
• 4-Band EQ (Bass +/- 10 dB at 87 Hz, Mid +/- 10 dB at 645 Hz, Treble +/- 8.5 dB at 4.4 kHz, Presence +/- 6.8 dB at 11.6 kHz)
• Controls for Level, Bass, Mid, Treble, Presence, Phones
• Cab Sim On/Off switch
• EQ On/Off switch
• Status LEDs for power supply
• Power Amp Clipping and Preamp Clipping
• Output impedance min. 4 Ohm
• Input voltage 100-240 V AC
• Dimensions (L x W x H): 157 x 127 x 63.5 mm
• Weight: 1.3 kg

Switches and connections on the rear panel:

• Power switch
• 6.3 mm mono jack inputs/outputs
• 6.3 mm headphone output
• 3.5 mm jack aux input
• XLR balanced output
• Power socket

• With built-in 50 Watt tube power amplifier with 6L6 tubes
• The Power Station can be used for three main applications: Power reduction of powerful amplifiers without the disadvantages of conventional power attenuators, an amplification for small amps, and as a high quality adjustable reactive load for silent recording.
• Stepless power reduction
• Effects loop-in
• Line in for preamps, laptops, MP3 players etc.
• Line out
• Amp input and speaker output 4/8/16 ohms separately switchable to match any amp or speaker
• Reduce or increase the power of small amps
• Effective tone control to equalise the sound in case of strong reduction
• Natural playing feel due to the Reactive Load, the dynamic playing feel of the amp is maintained
• Input Level Range switch well suited for use with vintage non-master volume tops
• XLR balanced out
• Silent Direct Recording via the unbalanced output
• Weight: 6.8 kg
• Dimensions (H x W x D): 91 x 355 x 228 mm
• Matching gig bag: Art.441103 (not included in delivery)

• Suitable for connection directly to effect units
• Class A / B tube circuit
• Output power: 20 watts
• Suitable for operation of guitar cabinets with 8-16 ohms.
• 1 x 12AXz (ECC83) and 1x AT7 (ECC81) pre-amp tubes
• 2 x Matched EL84 power amp tubes
• 2 x Input gain settings
• Transparent warm sound
• Controls for master and presence
• Hi / Low toggle switch to select the input impedance (Hi = 1 MOhm / Low = 220 kOhm)
• Standby toggle switch
• Power toggle switch
• Front-side 6.3 mm mono jack input
• Rear 1 x 8 ohms / 2 x 16 ohm 1/4" Mono-jack speaker outputs
• Rear 1 x 16 Ohm 1/4" Mono Jack Speaker Output
• Rear IEC AC IEC socket
• Rear AC Voltage Switch for Selecting Input Voltage (100 ~ 120V / 220 ~ 240V)
• Status LED
• Dimensions (L x W x H): 335 x 203 x 91 mm
• Weight: 5.25 kg
• Includes rack mounting ears and carrying handle

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• All-tube amplifier with 2 x 50 W
• Patented transformer technology allows for a height of only one rack height unit and yet high reliability and quiet operation
• The "Linear" mode delivers a full-range signal with flat response, while the "Enhanced" mode brings the colour and life to the sound that you would expect from a Fryette amplifier
• Power: 2 x 50 watts
• Preamp tubes: 2 x 12AX7
• Power tubes: 4 x 6L6GC
• Control: Volume
• Switches: Presence, Depth, Mono/Stereo
• Speaker outputs A & B: 4x 6.3 mm jack
• Input A & B: 2x 6.3 mm jack
• Line output A & B: 2x 6.3 mm jack
• Output impedances: 4, 8 & 16 Ohm
• Dimensions (W x D x H): 445 x 318 x 44 mm
• Weight: 9.1 kg
• Made in USA

• Compact power amp pedal for electric guitar
• For direct connection to any preamp, pedal or effects unit
• Power: 2 x 50W to 4 ohms
• For 4 - 16 ohm speakers
• Master volume controller
• 2 Inputs (L / R): 2x 6.35 mm jack
• Aux input: 3.5 mm stereo jack with LED
• 2 Speaker outputs (L / R): 6.35 mm jack
• Headphone output: 3.5 mm mini jack
• Dimensions: 124 x 74 x 59 mm
• Includes 24 V / 4.5 A power supply

• Power: 2 x 50 W
• Tubes: 3x ECC 83 and 4x 5881
• Stereo channels: left/ right
• Input gain switch
• Volume control per channel
• Presence A and B controller
• Standby switch per stereo side
• 8 and 16 Ohm output for each stereo channel
• Foot pedal connector
• Dimensions: 48 x 8.8 x 30 cm
• Weight: 12 kg

• Complete power amplifier in micro pedal form
• Maximum output: 30 W
• Suitable for direct connection to effects devices
• Delivers pleasant post-stage overdrive at higher volumes
• Master volume control
• Warm/bright toggle switch for adjusting the presence settings
• Status LED
• Output impedance: 8-16 Ohms
• Power via 24 V DC power supply with 2.1 x 5.5 mm AC adapter and polarity (-) inside (included)
• Battery operation is not supported
• Dimensions (L x W x H): 94 x 42 x 52 mm
• Weight: 144 g

• Power amplifier in pedalboard format
• Designed for direct use with a preamp or effect pedal
• Power: 100 W into 8 ohms or 190 watts into 4 ohms
• Class-D technology
• Controls for master volume, bass, mid and treble
• LED peak indicator
• LED signal indicator
• LED power-on indicator
• Input: 6.3 mm jack
• Loudspeaker output (4 - 16 Ohm): 6.3 mm jack plug
• Power supply: AC 220-240 V
• Dimensions: 162 x 100 x 64 mm
• Weight: 0.8 kg

Note: A preamp is required for operation

• Suitable for direct connection with effects devices
• Power: 700 W @ 4 Ohms/350 W @ 8 Ohms
• 3-Band EQ
• 13 dB boost/cut in each frequency band
• Speaker simulation
• Controls for volume, bass, mid and treble
• Power switch on the back
• 1/4" Mono-jack (L/R) inputs on the backside
• 2 (L/R) Speaker Twist/6.3 mm combo outputs on the rear
• 2 (L/R) XLR outputs on the backside
• 2 Cab Sim switches (one for each XLR output) on the rear
• Cold device plug on the back
• Power status LED
• Temperature status LED
• O.C. status LED
• Output impedance: 4-8 Ohms
• Input voltage: 100-230V AC
• Dimensions (L x W x H): 292 x 176 x 56 mm
• Weight: 2.860 g
• Made in USA