Electric Guitar Preamps

• Next-generation dual DSP-based HX modeling engine with four discrete stereo signal paths
• 45 Amps, 30 speakers, 16 microphones and 70 effects
• Imported IRs (impulse responses) with up to 1024/2048 samples
• Up to 3 expression pedals
• CV / Expression output
• Amplifier switching outputs and extensive MIDI control
• Extensive inputs and outputs for the seamless integration of the entire rig
• 10 Inputs and 12 outputs (including 4 FX loops)
• 8 In/8 Out USB Audio Interface
• AES/EBU, SPDIF and VDI interfaces
• 123 dB dynamic range at the guitar input for enormous depth and low noise
• Robust construction
• Format: 19"/ 3U
• Dimensions: 48.26 x 13.34 x 24.13 cm
• Weight: 4.2 kg

• Authentic tube amp sound with realistic response thanks to AIRD technology
• 200 Memory locations
• 23 Amp types and over 150 BOSS effects
• Versatile amp/effect routing with 15 assignable blocks
• Numerous speaker types & import possibility of own WAV impulse responses
• Individually assignable integrated control footswitch and expression pedal with toe switch
• Send/return loop for external pedals in four-cable setups
• Amp control switch output
• Computer editing with BOSS Tone Studio for macOS & Windows
• Optional Bluetooth Audio MIDI Dual Adapter for editing sounds and streaming audio via iOS and Android mobile devices (Art. 522827, not included)
• Controls: 1,2,3,4, Select, Output Level
• Push buttons: Page Up/Down, Effects, CTL/EXP, Menu/ Exit, Write, In/Out Settings
• Switch: Ground Lift
• LED: 1, 2, 3, 4, C1, Bank Up/Down, C2/Tuner, EXP 1 SW
• Foot switch: 1, 2, 3, 4, C1, Bank Up/Down, C2/Tuner, EXP 1 SW
• Input: 6.3 mm jack
• L&R output: 2x 6.3 mm jack
• Headphone output: 6.3 mm stereo jack
• FX Send & Return: 2x 6.3 mm jack
• AMP CTL 1, 2: 6.3 mm stereo jack
• CTL 3,4/EXP 2: 6.3 mm stereo jack
• Midi In & Out
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside
• Power consumption: 1200 mA
• Power supply with a PSB-1U 9 V DC mains adapter (included in delivery)
• Dimensions (W x D x H): 490 x 193 x 73 mm
• Weight: 3500 g

Note: Battery operation is not supported

• Richie Kotzen signature model
• The same analogue SansAmp circuit, delay with tap-tempo, boost and the Richie Kotzen Signature OMG from the first version, plus some additional features, such as independent reverb with selectable room size, a rotary effect, compressor, fuzz, tuner, XLR output, a headphone jack, as well as a switchable speaker simulation
• Controls: Boost Level - OMG: Drive, Tone, Level - SansAmp: Drive, Low, Mid, High, Level - Reverb - Delay: Time, Drift, Repeats, Level
• Buttons: Comp, Fuzz, SansAmp, Reverb Size, Roto, Headphones, Ground Lift
• LED: Effect on
• Foot switch: Boost, OMG, Reverb/Tuner, Delay, Tap/Speed
• Input (6.3 mm jack)
• Output (6.3 mm jack)
• XLR out
• Power adapter connector (female connector 5.5 x 2.1 mm, negative pin inside)
• Current consumption: 200 mA
• Power supply with a DC power adapter (Auto-Switching power adapter for voltages of 110 V-240 V with replaceable international plug for EU, UK, Australia/New Zealand included)
• Dimensions (W x D x H): 318 x 64 x 32 mm
• Weight: 587 g

Note: Battery operation is not supported.

• 32 Amp models
• 16 Speaker models
• 16 Effects
• The same sounds as the Pod 2.0
• More than 300 presets
• Built-in chromatic tuner
• 16 Character display
• 4 Controls and 4-way navigation button
• Jack input
• MP3 Player input (mini jack)
• Unbalanced output (6.3 mm jack)
• Headphone output (mini jack)
• USB output for connecting to a computer and sound editing with the free to download software
• Powered via 4x AAA batteries (included) or power supply DC-1: Article Nr: 265217 (optionally available)
• Weight: 180 g
• Incl. Mini USB cable for connecting to a PC (only MIDI, no audio transmissions!)

Bundle offer comprising

• Guitar Processor
• Next generation of Dual DSP-based HX Modeling Engine with 4 discrete stereo signal paths
• 50 Guitar amplifiers
• 12 Bass amplifiers
• 37 Cabs
• 16 Microphones
• 104 Effects
• Imports IRs (impulse responses) up to 1024/2048 sample lengths
• 12 touch-sensitive foot switches
• Pedal Edit Mode for freehand editing
• Near-instant footswitch and controller assignment
• Up to 2 expression pedals
• Wide MIDI control
• Extensive inputs and outputs for the seamless integration of an entire rig
• 8 In / Out USB audio interface
• AES / EBU / L6 LINK (works as SPDIF with adapter) and VDI interfaces
• 123 dB Dynamic range at the guitar input for depth and low noise
• Robust construction
• Dimensions (W x D x H): 52.9 x 30.1 x 9.2 cm
• Weight: 5.44 kg

• Transport bag
• Suitable for most multi-effects
• Outer material: robust nylon fabric
• Upholstery: 1.27 cm
• Large exterior pocket for accessories
• Adjustable shoulder strap
• Carry handle
• Dimensions: 61.6 x 29.21 x 10.0 cm
• Colour: Black

• Powerful and compact effect unit with 2 GHz dedicated DSP from the Quad-Core SHARC architecture
• Unique neural capture network architecture enables the analysis and simulation of the dynamics and sound of other amplifiers
• Integrated Wifi for sharing rig capture presets, backups and firmware updates
• The integrated Superior Modeling Technology enables a constantly growing collection of algorithms with uncompromising sound quality
• With custom rig captures from some of the best producers and sound designers
• Very low latency and unparalleled routing flexibility
• 7" Multi-touch display
• Cabsim with over 1000 impulse responses
• 11 Newly developed combination foot switches with rotary control function
• Volume controls
• Power supply connection: barrel connector 5.5 x 2.1 mm, negative polarity inside
• Power supply via 12 V DC power adapter (included)
• Dimensions (W x D x H): 290 x 191 x 48 mm
• Weight: 1.6 kg

Note: no battery operation possible.

Connections:

• Input 1 & 2: Combo XLR / 6.3mm jack
• FX Loop 1: 2x 6.3 mm jack
• FX Loop 2: 2x 6.3 mm jack
• Output 1 & 2: 2x XLR
• Output 3 & 4: 2x 6.3 mm stereo jack
• Headphone connection: 6.3 mm stereo jack
• Expression 1 & 2: 2x 6.3 mm stereo jack
• MIDI In & Thru / Ou
• USB

Two Notes ReVolt Guitar Preamp; Tube Pedal Preamp for Electric Guitar; Channels: 3; All Analog Preamp & Guitar Amp Simulator; inspired by the tone of three legendary UK & US Amps; 12AX7 preamp tube running at High Voltage delivers warmth and bite; Integrated OD-Boost; Analog Cab Sim for Live DI & recording; FX Loop and MIDI In/Out for effortless integration into existing setups; includes 10 Series-G DynIR Cabinet Collection captures inspired by leading guitar amplifier brands; Controls: DI Out Volume - Clean: Gain, Volume, Bass, Treble - Crunch: Gain, Volume - Lead: Gain, Volume - Crunch & Lead: Boost, Bass, Middle, Treble; effect loops: Input (1/4" Jack), Output (1/4" Jack), FX Send & Return (2 x 1/4" Jack), DI Out (XLR), Aux In (1/8" TRS-Jack), MIDI In & Out; Connections: Input (1/4" Jack), Output (1/4" Jack), FX Send & Return (2 x 1/4" Jack), DI Out (XLR), Aux In (1/8" TRS-Jack), MIDI In & Out; Power Supply connector: Barrel Connector 5.5 x 2.1 mm, center negative; Current Draw: 500 mA; powered by a 12 V DC Power Supply (included); dimensions (W x D x H): 192 x 117 x 72 mm, (7,56 x 4,61 x 2,83 ); weight: 0,75 kg (1,7 lbs)

• 2 Channels
• Tubes: 12AX7
• Clean Channel with volume control
• Overdrive channel with gain- & volume controls
• Noiseless buttons
• 3-Band EQ
• Non-buffered Pre-FX loop
• Fully buffered Post-FX loop
• Monitor output with -10 dbV for power amps
• -10 dbV for FX Return and (Re-Amp) for Clean Channel
• Balanced XLR DI Rec/PA output with speaker emulation
• Remote control input for Midi switcher or external switching
• 12V AC power supply input
• 9V DC/200 mA output
• Dimensions (WxDxH): 13.2 x 20.5 x 6.4 cm
• Weight: 1.2 kg
• Incl. power supply

• Developed by Joe Morgan
• 2 Channels
• Tubes: 2x 12AX7
• 3-Band EQ
• Separate gain and volume control

Bundle offer comprising

• Kemper Profiler Stage

The Kemper profiling technique allows the creation of a very precise sonic image (profile) of an existing amplifier configuration (including cabinet and microphone pickup). Thanks to the many internal processing options such as various ground effect emulations (up to 4 at a time), master effects, equaliser, gain, amp definition, power sagging etc., the sound created can then be processed far beyond the possibilities of the original amplifier. However, the Kemper Profiling Amplifier is also already delivered with a large number of outstanding amplifier profiles, which is why it is not absolutely necessary to create your own profiles. This makes it possible from the first time to exactly reproduce the sound of your own amplifier, to modify it (if desired) and to have it available for practising, in the studio or on stage without a lot of lugging around.

• Combination of Kemper Profiler guitar amplifier and Profiler Remote foot controller in one pedalboard
• Complete Profiler with the same functions and legendary sound of the well-known Profiler Head
• The combination allows you to control, manage and program performances, as well as rig switches and complex parameter morphs
• Backlit display that is easy to read even in sunlight
• Dimensions (W x D x H): 47 x 26 x 8.5 cm
• Weight: 4,6 kg
• Matching case: Art.471009 (not included in delivery)

Connections:

• Input: 6.3 mm jack
• Return 1-4: 4x 6.3 mm stereo jack
• Main Out L & R: 2x XLR / 6.3 mm jack
• Monitor Out L & R: 2x 6.3 mm jack
• Send 1 & 2: 2x 6.3 mm jack
• Footswitch/Exp Pedal 1-4: 4x 6.3 mm stereo jack
• Headphone Out: 3.5 mm stereo jack
• MIDI In/Out/Thru
• S/PDIF In/Out
• USB

• Transport Bag
• For Kemper Profiler Stage
• Durable, water-repellent fabric
• Additional laptop/accessory compartment
• Handle & shoulder strap
• Dimensions (W x D x H): 500 x 100 x 270 mm
• Weight: 1.6 kg

Bundle offer comprising

• Guitar Processor
• Next generation dual DSP based HX Modeling Engine with 4 discreet stereo-signal paths
• 50 Guitar amp models, 12 bass amp models, 37 speakers, 16 microphones and 104 effects
• Imported IRs (impulse responses) with up to 1024 / 2048 samples
• 12 Pressure sensitive foot switches for editing
• The Hands Free Pedal Edit mode sets the effects parameters onto the switch and expression pedal
• Near-Instant foot switch and controller assignment
• Up to 3 expression pedals
• CV/Expression output
• Amplifier switching output and extensive MIDI control
• Extensive inputs and outputs for the seamless integration of entire rigs
• 10 Inputs, 12 outputs (including four FX loops)
• 8 In / 8 Out USB audio interface
• AES / EBU, SPDIF and VDI interfaces
• 123 dB Dynamic range on the guitar input for enormous depth and low noise
• Robust construction
• Dimensions (W x D x H): 55.8 x 30 x 8.5 cm
• Weight: 6.6 kg

• Transport bag
• Suitable for most multi-effects
• Outer material: robust nylon fabric
• Upholstery: 1.27 cm
• Large exterior pocket for accessories
• Adjustable shoulder strap
• Carry handle
• Dimensions: 61.6 x 29.21 x 10.0 cm
• Colour: Black

• 2 Channels
• Tubes: 2x 12AX7
• 3-Band EQ
• Separate gain and volume controls

• Slot for a module
• 1x 12AX7 tube
• FX loop
• XLR DI output
• Modules can be swapped around as desired and thus different styles can be covered
• 2 channels (with built-in module)
• Incl. footswitch
• Made in the USA
• Module is not included
• Specially developed for the Synergy system

Bundle offer comprising

• Preamp for electric guitar
• 32 Amp models
• 16 Speaker models
• 16 Effects
• The same sounds as the Pod 2.0
• More than 300 presets
• Built-in chromatic tuner
• 16 Character display
• 4 Controls and 4-way navigation button
• Jack input
• MP3 Player input (mini jack)
• Unbalanced output (6.3 mm jack)
• Headphone output (mini jack)
• USB output for connecting to a computer and sound editing with the free to download software
• Powered via 4x AAA batteries (included) or power supply DC-1: Article Nr: 265217 (optionally available)
• Weight: 180 g
• Incl. Mini USB cable for connecting to a PC (only MIDI, no audio transmissions!)

• AC /PSA Power Supply for Effects Pedals
• Suitable for devices by Ibanez, Boss, Behringer and others
• 9 V DC / 1 A
• Connector: 5.5 mm / 2.1 mm
• Polarity: + outside
• Switching power supply technology

• Instrument Cable
• Both sides: 6.3 mm mono jack
• 0.22 mm² / AWG 24
• Outer diameter: 6.0 mm
• Length: 3 m
• Colour: Black

• Based on the Dumble Overdrive Special - one of the most coveted boutique tube amplifiers
• 2 Channels
• Tubes: 2x 12AX7
• Controls: Bass, Mid, Treble, OD Level, OD Ratio, Presence, Master and Volume
• Switches: Bright, Deep, Rock/Jazz
• Dimensions (W x D x H): 17.8 x 14 x 3.8 cm
• Weight: 454 g