Guitar Amp Accessories

• Suitable for EVH 5150 III 15 W LBX Top (Article Nr: 366053)
• With carrying strap

• Long model
• E.g. for the MG50 DFX
• Includes all fittings and mounting screws

• Simple solution to take up the warmth and dynamics of your sound without putting microphones to a speaker during a gig or studio recording
• Connected to tube amp instead of loudspeaker and loads it with 8 Ohm
• Generates a symmetrical as well as assymmetrical signal (without loudspeaker simulation) to be connected to recording devices, effects and power amps
• Recommended max. amp power: 100 Watt RMS
• Dimensions (W x D x H): 22.35 x 22.6 x 9.6 cm
• Weight: 3 kg

• Improved V2.0 Basic model
• Prevents the shrill sound beam (BEAM effect) of loudspeakers and improves projection
• Plug & Play all-rounder for uniform 3D sound at home, in the rehearsal room and on stage
• Sound radius: 0.5 - 7 m - more than 180°
• Detailed projection even at close distance to the amp improves surround sound
• "Warm" sound continuously adjustable up to "neutral" with scale in the foot section
• Easy set-up - no installation necessary
• Additional bevels & lines offer improved visibility on dark stages
• Dimensions (WxLxH): 280 x 645 x 120 mm
• Dimensions standing (WxHxD): approx. 280 x 420 x 380 - 500 mm
• Weight: approx. 1.1 kg
• Made in Germany

Suitable for the following amp and cabinet types:

• Electric guitar: 2x 12" / 1x 12" / 2x 10" / 1x 10" / 1x 8
• Electric bass: 4x 10" / 2x 10" / 1x 10" / 1x 8" / 2x 12" / 1x 12" / 2x 15" / 1x 15
• Monitor speakers (stand upright, tweeter below)

• Suitable for most combo amps
• Lightweight and durable (reinforced with Kevlar)
• Low frequencies remain unaffected (coupling effect)
• Can be folded flat and fits into any gig bag or case
• The inclination is adjustable over 3 positions
• Suitable for amps max. 37 kg according to manufacturer

• For Z5 footswitch
• Length: 7 Meters

• Suitable for Fender Combo Acoustasonic Jun.
• Applied on the side
• Length: app. 35.5 cm (14")
• Incl. screws

• For amplifiers (amplifier casters)
• Suitable for Fender
• Package contents: 4 pieces
• Includes flange and mounting material

• For AC 30 guitar amp

• Joe Bonamassa signature model
• For guitar amplifiers and boxes
• Perfect size for cabinets and combos with 4 x 12 " or 4 x 10" speakers
• Made of high-quality, laser-cut acrylic
• According to Joe Bonamassas specifications
• Thickness: 6,35 mm
• Dimensions (H x W) 86 x 183 cm
• Illustrations show the panel partially with protective film

• With housing
• Power: 500VA. 230 / 115V
• Black steel housing
• Power switch
• Function LED and fuse
• 2 US mains sockets, eg for Fender Twin Reverb; Marshall 100 W; Mesa Boogie MK I-IV 100 W; Dual-Triple Rectifier, DC10, 2:90; Ampeg V5, V7, VT22etc

• For home, live and studio use
• Max. power rating: 100 W RMS
• 8 Ohm version
• For playing a tube amplifier at its "sweet spot" and adjusting the volume with the attenuator
• New functions for the Torpedo Captor family include a stereo expander (stereo reverb and double tracker), enhancer, voicing, space, noise gate and XLR DI outputs with 3 routing options (stereo, dual mono and dry / wet)
• Controls: Space, Voicing, Out Level, Preset
• Push buttons: In Level High / Low, Gnd Lift
• Switch: Volume Full / Low
• Headphone output: 6.3 mm stereo jack
• Speaker input: 6.3 mm jack
• Speaker output: 6.3 mm jack
• Left & Right output: XLR
• MIDI input: 3.5 mm stereo jack
• USB
• Power supply connection: barrel connector 5.5 x 2.1 mm, negative polarity inside
• Power supply with a 12 V DC power adapter (included)
• Dimensions (W x D x H): 128 x 175 x 64 mm
• Weight: 1.3 kg

• Weight capacity: 227 kg
• Length: 86-132 cm
• Width: 35 cm
• Width including wheels: 50 cm
• Folded height: 28 cm
• Extended height: 103 cm
• Rotatable front wheels: 5 " x 1.25 "
• Rear wheels: 10 " x 3 " R-Trac "no flat"
• Weight: 13.6 kg

• Original entrance socket
• Serves as a recessed connection panel for the mono cabinet connection
• Four boreholes
• Outer diameter: 95 mm
• Drilling diameter: approx. 60 mm
• Installation depth: 50 mm
• MRPACK00018
• Fastening screws included

Note: Socket not included.

• 2 Selectable modes
• Mode 1 switches channels and effects on and off
• Mode 2 switches presets up and down
• Robust metal housing

• Professional live/studio model with additional diffuser
• With Meridian guidelines for positioning microphones
• Prevents the shrill sound beam (BEAM effect) of loudspeakers and improves projection
• Even sound distribution in the rehearsal room and on stage for improved audibility of the amp
• Consistent sound for musicians and listeners
• Customisable "Enhanced Zones" through additional diffuser
• Detailed reproduction even at close distance to the amp improves the sound in the room
• Sound beam is effectively dispersed, no indirect sound due to interference or blocking/shielding of sound
• “Warm" sound infinitely variable up to "neutral" with scale in the foot board
• Easy to set up - no installation necessary
• Dimensions: (WxLxH): 280 x 645 x 120 mm
• Standing dimensions (WxHxD): Approximately 280 x 420 x 380 - 500 mm
• Weight: Approximately 1.3 kg
• Made in Germany

Suitable for the following amp and cabinet types:

• Electric guitar: 2x 12" / 1x 12" / 2x 10" / 1x 10" / 1x 8
• Electric bass: 4x 10" / 2x 10" / 1x 10" / 1x 8" / 2x 12" / 1x 12" / 2x 15" / 1x 15
• Monitor speakers (stand upright, tweeter below)

• For live and studio, noise and sound shielding of amplifiers or instruments
• Indispensable for volume control on stage and in the studio and clean mix
• Easy handling thanks to folding "accordion-style" hinge
• Made of high-quality, laser-cut acrylic
• Consists of 4 panels with connectors (hinges)
• Dimensions (H x W): 610 x 305 mm
• Thickness: 6.35 mm
• This size is well suited for shielding combo amplifiers
• Illustrations show the panels partly with protective film

• For speakers with transport casters
• 4x Drill holes
• External dimensions: 110 x 55 mm
• Cut-out box dimensions: approx. 80 x 35 mm

• For Schertler David, Unico and Jam
• Dimensions (W x H): 25.4 x 38 cm
• Weight: 1.7 kg
• Max. load bearing capacity: 33.9 kg

• Suitable for the trailing edge
• Includes fastening screws
• 4-Pack