Guitar Amp Accessories

• All-in-one solution
• For making perfect recordings of guitar and bass sounds, on stage and in the studio
• Reactive load resistance
• -20 dB power reducer
• Analogue speaker simulation
• DI Box
• 8 Ohm version
• Maximum amplifier power: 100 W RMS
• Fan-cooled
• Solid metal case
• Compact size
• Perfect for pedalboards
• Front side: Output Level Switch, Ground Lift, Instrument and Phase Switches, Line Output Jacks, Balanced DI Output & Power Adapters (9 - 24V DC / 5mA - Power Supply not included)
• Rear side: Sockets for Speaker Thru, Speaker Attenuator and Amplifier Input
• Dimensions: 175 x 126 x 62 mm
• Weight: 1 kg
• Includes "Wall of Sound III" plug-in with 16 free virtual cabinets (after registration of the product)

• Material: plastic
• Colour: black
• Set includes two pieces
• Not suitable for the AS50, AVT, or Valvestate combos

• For Fender amplifier since year of construction, 1960
• Pack of 4 pieces
• Colour: Nickel / chrome
• Includes 4 x 2 screws HR3040

• To control the BluGuitar AMP1 by an external MIDI controller
• Connect to the remote socket of the AMP1
• This is used to call up all the AMP1 switching functions via MIDI Program Change commands as well as control of Master Volume, Gain / Clean Volume, and PowerSoak via MIDI Control Change commands

Bundle offer comprising

• 6-Segment Panel
• For live and studio applications
• Sound shielding from drum kits, amplifiers or instruments
• Easy handling by folding in "accordion-style"
• Made of high-quality, laser-cut acrylic
• Consists of 6 panels with connectors (hinges)
• Each panel is 6.35 mm thick, 915 mm high, and 600 mm wide
• Indispensable for volume control on stage and in the studio and for a clean mix

• Absorber Panel Twin Pack
• Made of compressed fiberglass and encased in dark gray cloth
• The panel can also be mounted on the inside of the acrylic ClearSonic Shields to reduce the amount of reflected sound, or used as sound absorbers in studio, basement and churches etc.
• With the enclosed Velcro connectors, panels can easily be attached to almost any smooth surface
• Dimensions: 838 mm x 558 mm x 38 mm
• Colour: Dark grey / Anthracite
• Set of 2 pieces

• Absorber Panel
• Made from compressed fibreglass and with a dark gray textile cloth
• This absorber is mainly used as a centrepiece for the ClearSonic cover system (LidPac)
• Can also be used as a sound absorber in studios, basements as well as church walls, etc.
• Dimensions: 1220 mm x 609 mm x 38 mm
• Colour: Dark grey / Anthracite

• Four octal socket adapters
• For the control of the retirement
• At 6L6GC, 6550, EL34, 6V6 GT, 5881, KT88, KT66, KT90, KT100, 7027A
• With illuminated display
• Made in Germany

• A simple solution to capture the warmth and dynamics of your sound without the hassle of removing a speaker during a performance or studio recording
• Is connected in place of the speaker box and provides an 8 ohm load for your tube amp
• Creates a balanced and unbalanced signal that can be connected to recording devices, effects and power amplifiers
• In addition to the original Suhr Reactive Load, the Reactive Load IR adds impulse response technology that provides quick and easy access to a range of professionally microfoned loudspeakers
• 16 Preinstalled impulse responses from Suhr loudspeaker cabinets with Celestion loudspeakers
• Third-party impulse responses can be loaded via the USB port
• Controls: IR Select, HP Level, DI Level
• Switch: Signal 0 / + 6 dB, Hi-Cut
• 6.3 mm Jack amplifier input
• 6.3 mm Jack thru to speaker connection
• 6.3 mm Stereo jack DI / Line Output Un-Filtered
• 6.3 mm Stereo jack DI / Line output IR
• 3.5 mm Stereo jack headphone output
• 3.5 mm Stereo jack aux In
• Power adapter connector (female connector 5.5 x 2.1 mm, negative pole inside)
• Current consumption: 200 mA
• Power supply via 9 V DC power adapter
• Recommended maximum amplifier power: 100 Watts RMS
• Dimensions (W x D x H): 22.35 x 22.6 x 9.6 cm
• Weight: 3 kg
• Includes power supply

• For live and studio applications
• Noise and sound shielding of drum kits, amplifiers or instruments
• Easy handling by folding accordion-style hinge
• Made out of high quality laser-cut acrylic
• 3 panels with connectors (Hinges)
• Thickness: 6.35 mm
• Height: 1220 mm
• Width: 600 mm
• Indispensable for volume control on the stage and in the studio

• Carpet-covered wooden platform with aluminium edge
• Maximum load capacity : 80 kg
• Mounted on a high-density foam base
• Dimensions (W x D x H): 591 x 388 x 81 mm
• Weight: 2.8 kg

• For home, live, and studio use
• Max. power rating: 100 W RMS
• 16 Ohm version
• For playing a tube amplifier at its "sweet spot" and volume control with attenuator
• New features for Torpedo Captor family include a stereo expander (stereo reverb and double tracker), enhancer, voicing, space, noise gate, and XLR DI outputs with 3 routing options (stereo, dual mono, and dry/wet)
• Controls: Space, voicing, out level, preset
• Push buttons: In Level High/Low, Gnd Lift
• Switch: Volume full / low
• Headphone output: 6.3 mm Stereo jack
• Speaker input: 6.3 mm Jack
• Speaker output: 6.3 mm Jack
• Left & right output: XLR
• MIDI input: 3.5 mm Stereo jack
• USB
• Power supply connection: Barrel plug, 5.5 x 2.1 mm, negative polarity inside
• Powered via a 12 V DC power supply (not included)
• Dimensions (W x D x H): 128 x 175 x 64 mm
• Weight: 1.3 kg

• For certain Roland amplifier models
• Voltage: 9 V
• Longer runtime than with normal battery operation
• Easy insertion and removal
• Higher output power and volume
• High quality construction with safe, efficient and reliable NiMH battery pack
• Rechargeable via the supplied power supply of the compatible Roland amplifier model (except BA-330)
• Compatible with CUBE Street EX, AC-33, AC-33-RW, KC-220, BA-330 (when used with BA-330, a separate PSB-12U power supply is required for charging)
• Weight: 690 g

• For live and studio applications
• Noise and sound shielding of drum kits, amplifiers or instruments
• Easy handling by folding accordion-style hinge
• Made out of high quality laser-cut acrylic
• Consists of 2 panels with connectors (Hinges)
• Thickness: 6.35 mm
• Height: 1220 mm
• Width: 600 mm
• Indispensable for volume control on the stage and in the studio for a clean mix

• Voltage: 6.3 V
• Bayonet base - fits most Fender and Orange control displays
• Price is for a pair

• Vintage model
• Reinforced version
• Includes 4 screws
• Colour: black

• Suitable for the front edge
• For slanted cabinet shape
• 2-pack

• Suitable for the Hughes & Kettner BlackSpirit 200 top
• Easy to assemble

• Format: 9.5''/ 1 RU
• Adjustable in 6 steps (100%, 70%, 50%, 35%, 25%, 18%)
• Reduces the volume of a guitar speaker at full saturation of the tubes
• Made for 16 Ohm loudspeakers
• Bypass/ attenuator switch for fast switching between full and reduced output power
• Input: 1x 6.3 mm jack socket
• Output for loudspeaker 1x 6.3 mm jack socket in parallel
• Output impedance: 16 Ohm

• Enables wireless Bluetooth functionality for compatible products
• Extends the capabilities of the CUBE Street II to wirelessly connect smartphone or tablet to the amplifier and jam live to backing tracks or play background music between sets
• Connection to the CUBE Street II editor possible
• The free app provides access to advanced features such as effects editing, monitoring battery status, creating live sets
• Supports Bluetooth Audio and Bluetooth MIDI (BLE-MIDI) communication standards
• Quick and easy installation
• Power supply via the host product