MIDI Footswitches

• 10 Rugged foot switches for program changes
• 2 Switch for bank up/ down
• Large blue-backlit LED display
• Diezel Herbert connection with regular XLR cable
• Also suitable as a "normal" MIDI board via MIDI cable (cable available on option, e.g., Art. 213368 for Columbus interface or Art. 129105 for MIDI)
• Does not work with ENGL amps

• New version of the popular MIDI Moose
• Offers additional features despite its compact size
• In addition to a 7-pin connection for an external phantom power, two independent inputs for continuous controllers are available for data exchange with other MIDI devices
• With only 5 foot switches, groups with 5 or 10 preset programs can be switched over in a flash
• With special page functions that allow you to set the numbers for the MIDI channel and the channel for the continuous controllers and to make a calibration
• Specially manufactured, particularly smooth-running controls
• Robust metal housing
• Large, anti-reflective LED display
• Power supply: either via phantom power, a (optionally available) 9 V alkaline battery or a separately available power supply (Tech 21 model # DC4)
• Dimensions (W x D x H): 29.2 x 6.3 x 3.3 cm

• In metal housing
• Power supply via external power supply or via MIDI Switcher Z-11 or MIDI Interface Z-7
• 12 Buttons
• Power supply optional
• Weight: 2.8 kg

• 2 Expression pedals and MIDI Merge function
• 10 Banks of 10 presets - freely editable (with presets for Behringer amps)
• Controller number and range freely configurable in MIDI channel
• Simultaneous transmission of 5 MIDI program changes and 2 MIDI controllers per preset
• MIDI NOTE command for trigger and tap tempo applications
• 2 Programmable galvanically decoupled switch sockets, e.g. for channel switching of a guitar amplifier
• MIDI Merge function allows Soft Thru and mixing of controller and input data
• Built-in power supply
• Dimensions (W x H x D): 687 x 60 x 221 mm
• Weight: 3.5 kg
• Suitable bag: Article no. 490619 (not included)

• One of the most flexible and well-equipped MIDI footswitches on the market
• Compatible to all MIDI-controlled devices
• Stable sheet steel housing
• Four presets per bank
• Up to 8 devices or controllers, each with its own MIDI channel
• In combination with a GCX audio switcher, amps or devices with a relay switch can be controlled
• 8 Switches can then be programmed to work as "direct access" switches, thus providing the highest degree of flexibility
• Real-time control with "MIDI continuous controller messages" for control of volume pedals or expression pedals
• Bright, stage-friendly display shows the current preset
• LED's on each switch (can even be seen on the darkest stage)
• Dimensions: Approx. 43 cm x 28 cm x 6.35 cm
• Power supply via GCX or with included power supply
• Made in USA
• Matching case: Art.230518 (not included in delivery)

• Metal housing
• 6 Buttons
• Bank A/B
• 2 Operating modes: MIDI (optional power supply required), S.A.C. (only with stereo jack, no power adapter required - power supply via phantom power from Engl Amp)

Note: Power supply AC 7-14 V, DC 9-20 V and MIDI cable not included!

The TECH-21 MIDI Mouse is quickly explained. A small Midi Switcher in pocket format. On the front, there is an up / down button, an Activ / Search button and a large LED display, which is also easy to read on the darkest stage. The destination preset can be selected without the active program is cut. Pressing the Active / Search button activates the new program. The Midi Mouse can either be powered by an external power supply, via phantom power via Midi cable or with a 9V battery. During battery operation the display goes into the "sleep" mode after some time the Midi Mouse has not been used, in order to avoid unnecessary battery runs. At the slightest pressing one of three buttons, the display is back on immediately.

• With up / down button
• Easy to use
• Battery operation also possible

• Robust metal housing
• Track and transport control with Nektar DAW integration
• Support for e.g. Bitwig, Cubase, GarageBand, Logic, Nuendo, Reason, Reaper and Studio One
• MCU for all common DAWs and Pro Tools Setup
• Fully programmable MIDI controller
• 24 Presets - banks A-D per memory 6 presets
• Up to 16 MIDI commands can be sent per Preset
• 10 Programmable footswitches
• 4 Programmable external footswitches (optional)
• 2 Programmable external expression pedals (optional)
• 4 Programmable relays
• 1 Programmable encoders
• The footswitches can be programmed to send up to 6 commands when activated or in sequence (one after the other)
• RGB LEDs offer multicolour status displays (freely programmable)
• Dedicated icons for Nektar DAW integration
• MIDI Machine Control (MMC)
• MIDI output for external hardware control or for use as USB-MIDI interface
• USB Class Compliant (no driver needed)
• Powered by USB host or USB power adapter
• Connection for external 9 V power supply (middle negative)
• Presets for popular guitar MIDI devices such as Line6 Pod and Helix, Avid Eleven, Kemper Profiler and AxefX
• MAC (OS X 10.5 or higher) and PC (Windows XP, Vista, 7, 8, 10 or higher) and Linux (Ubuntu)
• Nektar DAW integration on Windows Vista, 7, 8, 10 and Mac OS X 10.7 or higher