Lapel Microphones

• Light condenser lavalier microphone for speaking and music uses
• Omnidirectional polar pattern
• 50 - 20,000 Hz
• 2.7 mV / Pa
• -51.2 dB re 1 V / Pa
• 125 dB SPL max.
• 300 Ohm
• 4-Pin TQJ connector for Shure and Line6 wireless systems
• Colour: Black
• Cable length approx. 120 cm
• Incl. Cable clip and wind shield

• Light condenser lavalier microphone for speaking and music uses
• Omnidirectional polar pattern
• 50 - 20,000 Hz
• 2.7 mV / Pa
• -51.2 dB re 1 V / Pa
• 125 dB SPL max.
• 300 Ohm
• 3-Pin TQG connector for AKG and t.bone wireless system
• Colour: Black
• Cable length approx. 120 cm
• Incl. Cable clip and wind shield (optional replacement wind shield, Article Nr 355915)

• Polar pattern: omnidirectional
• Frequency range: 20 - 20000 Hz
• Presence boost +3 dB from 8 - 20000 Hz
• Max. sound pressure level: 134 dB
• For wireless transmitter systems with B+K plug (suitable adapters for almost all transmitter systems are separately available, not included in the delivery)
• Especially designed for speech, but with the appropriate accessories also very suitable for instrument miking (not included in the delivery)
• Colour: Beige

• Polar pattern: Omnidirectional
• Frequency range: 20 - 20000 Hz
• +3 dB presence boost from 8 - 20000 Hz
• Limiting sound pressure level: 134 dB
• Especially for speech
• For wireless transmitter systems with 3-pole Lemo
• With optional accessories also very suitable for instrument miking (not included)
• Colour: Beige

• Suitable for AVX evolution Wireless D1, XS Wireless 1, XS Wireless 2, Evolution Wireless
• Polar pattern: Omnidirectional
• Frequency range: 50 - 18,000 Hz
• Cable length: 1.6 m
• Integrated windshield
• Colour: Black

• Clip-on condenser microphone
• Especially used for speech miking
• Heavy duty version
• Polar pattern: omnidirectional
• Reduced sensitivity
• Frequency range: 20 - 20,000 Hz
• Presence boost +3 dB from 8 - 20 KHz
• Max. sound pressure level: 144 dB
• For wireless transmitter systems with B+K plug (optional adapters available for almost all transmitter systems)
• With optional accessories it can be also very suitable for instrument miking
• Colour: Beige

• Polar pattern: Omnidirectional
• IP57 - dustproof and waterproof
• 5 mm omnidirectional miniature design for discrete placement and improved gain before feedback
• Neutral, full sound quality for film, radio, speech, theatre and performance applications
• Advanced 1.6 mm Shure Plex Cable: Immune to memory effect and kinks
• Can be painted over completely with typical theater paints, pens and polishes
• Presence Cap included for a custom frequency response for additional clarity and presence of the voice (3-4 dB boost at 10 kHz)
• Capsule: MEMS
• Frequency range: 20 - 20,000 Hz
• Sensitivity: -42.5 dBV (7.5 mV RMS) at 1 kHz
• Inherent noise: 31 dB SPL-A
• Signal to noise ratio: 63 dB
• Maximum sound pressure level: 132.0 dB SPL
• Dynamic range: 101.0 dB
• Cable length: 1.67 m (66.0 in)
• Capsule dimensions (L x D): 14.5 x 5.2 mm
• Weight: 15.0 g (0.53 oz)
• Connector: LEMO
• Colour: Tan

Accessories included:

• Case
• Foam windscreen
• Windscreen with snap fastener
• Single tie clip
• Adhesive fastener

• Omnidirectional polar pattern
• Frequency range: 20 - 20,000 Hz
• 144 dB SPL max.
• TA4F Mini-XLR connector for Sure
• Weight: 8 g including cable and TA4F Mini-XLR connector
• Cable length: 1.8m
• Temperature range: -40° C to 45° C
• Includes 8-way multi-clip
• Colour: Black

• Miniature condenser capsule with omnidirectional polar pattern
• Frequency range: 60 - 18,000 Hz
• With Kevlar reinforced connector cable with TRRS jack connector
• Operates with any audio- or video app that accepts audio signals from headset connectors
• Cable length: 118 cm
• Incl. foam pop filter, clamp and transport bag

• Polar pattern: Omnidirectional
• IP57 - dustproof and waterproof
• 5 mm omnidirectional miniature design for discrete placement and improved gain before feedback
• Neutral, full sound quality for film, radio, speech, theatre and performance applications
• Advanced 1.6 mm Shure Plex Cable: Immune to memory effect and kinks
• Can be painted over completely with typical theater paints, pens and polishes
• Presence Cap included for a custom frequency response for additional clarity and presence of the voice (3-4 dB boost at 10 kHz)
• Capsule: MEMS
• Frequency range: 20 - 20,000 Hz
• Sensitivity: -42.5 dBV (7.5 mV RMS) at 1 kHz
• Inherent noise: 31 dB SPL-A
• Signal to noise ratio: 63 dB
• Maximum sound pressure level: 132.0 dB SPL
• Dynamic range: 101.0 dB
• Cable length: 1.67 m (66.0 in)
• Capsule dimensions (L x D): 14.5 x 5.2 mm
• Weight: 15.0 g (0.53 oz)
• Connector: Male TQG
• Colour: Cocoa

Accessories included:

• Case
• Foam windscreen
• Windscreen with snap fastener
• Single tie clip
• Adhesive fastener

• Omnidirectional polar pattern
• Frequency range: 20 - 20,000 Hz
• 144 dB SPL max.
• 3-Pin Lemo connection for Sennheiser
• Weight: 8 g including cable, plastic case and 3-Pin Lemo connector
• Cable length: 1.8m
• Temperature range: -40° C to 45° C
• Colour: Black

• For WS 100 BP Belt Pack and WS 1616 BP Belt Pack
• Polar pattern: Cardioid
• Frequency response: 20 - 20,000 Hz
• Impedance: 680 Ohm
• Weight: 0.026 kg
• Colour: Black
• Includes mounting clip and foam windshield

• Especially used for speech miking
• Polar pattern: omnidirectional
• Frequency range: 100 - 15,000 Hz
• Presence boost +5 dB from 4-6 kHz
• Max. sound pressure level: 144 dB
• For wireless transmitters with B+K plug (optional adapters for almost all transmitters available)
• Colour: Black

• Ribbon cable
• Polar pattern: omnidirectional
• Frequency response with subtle presence boost
• Neutral sound character
• Max. SPL: 110dB
• Frequency range: 20 - 20,000 Hz
• Power supply: 2 - 5 V
• Power supply via connected unit
• Connection: 3.5 mm TRS connector with union nut
• Cable length: 1.2 m
• Incl. alligator clip with integrated cable guiding, foam pop screen, mini fur windshield, 4 identification rings (pink, green, blue, orange) and carrying case

• CORE version
• Polar pattern: Cardioid
• Normal SPL
• MicroDot connector
• Colour: Black
• Includes clip and foam windshield

• Polar pattern: Omnidirectional
• IP57 - dustproof and waterproof
• 5 mm omnidirectional miniature design for discrete placement and improved gain before feedback
• Neutral, full sound quality for film, radio, speech, theatre and performance applications
• Advanced 1.6 mm Shure Plex Cable: Immune to memory effect and kinks
• Can be painted over completely with typical theater paints, pens and polishes
• Presence Cap included for a custom frequency response for additional clarity and presence of the voice (3-4 dB boost at 10 kHz)
• Capsule: MEMS
• Frequency range: 20 - 20,000 Hz
• Sensitivity: -42.5 dBV (7.5 mV RMS) at 1 kHz
• Inherent noise: 31 dB SPL-A
• Signal to noise ratio: 63 dB
• Maximum sound pressure level: 132.0 dB SPL
• Dynamic range: 101.0 dB
• Cable length: 1.67 m (66.0 in)
• Capsule dimensions (L x D): 14.5 x 5.2 mm
• Weight: 15.0 g (0.53 oz)
• Connector: Male TQG
• Colour: Black

Accessories included:

• Case
• Foam windscreen
• Windscreen with snap fastener
• Single tie clip
• Adhesive fastener

• For SK 100/300/500-D Evolution Wireless series
• Cardioid
• Incl. Windshield
• Optional matching windshield: Article Nr 161350

• Omnidirectional
• Neutral sound
• Frequency response: 20 - 20000 Hz
• Low sensitivity: -45.0 dBV (5.62 mV)
• Peak SPL: 142 dB
• Cable diameter: 1.6 mm
• Cable length: 1.67 m
• Microdot plug
• Water-repellent capsule coating
• Unique double membrane capsule design
• For applications with high sound pressure levels
• Cable can be painted over
• Colour: Cocoa
• Suitable adapters: Article no. 464627, no. 464628 and no. 494486 (all not included)

• For SK 100/300/500-D Evolution Wireless series
• Cardioid
• Incl. Windshield
• Optional matching windshield: Article Nr 161350