Small Diaphragm Condenser Microphones

• Cardioid
• Pressure gradient transducer
• Successor of KM 84
• Very smooth frequency responses not only for the 0° axis, but also for lateral (off-axis) sound incidence.
• Frequency response: 20-20000 Hz
• Nominal Impedance: 50 Ohm
• Rated load impedance: 1000 ohms
• Max. output voltage 2540 mV
• Weight: 80 g
• Diameter: 22 mm
• Length: 107 mm
• Includes WNS 100 windscreen and SG 21/17 stand mount swivel

• Cardiod
• Modular design
• Frequency response: 30-50000 Hz
• 142 dB SPL
• 25 Ohm
• Extremely low noise
• Matt coating
• Includes MZQ 8000 microphone holder, MZW 8000 windshield and plastic case

• Polar pattern: hyper cardioid/ lobar
• Frequency range: 30 Hz - 20 kHz
• Switchable low cut @ 180 Hz (12dB/ Oct.)
• Impedance: 200 Ohm
• Max. SPL: 130 dB
• Required phantom power: 9 - 52V
• XLR Connector
• Diameter: 21 mm
• Length: 413.5 mm
• Incl. wind shield and clamp

• True condenser
• 1/2 " Gold-plated capsule
• Switchable pad: -10 and -20 db
• Switchable low cut: 75 to 150 Hz
• Universally applicable
• Ideal for vocal and instrument recording
• Colour: black
• Including shockmount, windscreen and pop filter

• Especially for drums
• Polar pattern: Supercardioid
• Frequency range: 20 - 20,000 Hz with 2 dB soft boost at 10 - 12 kHz
• Max. sound pressure level: 152 dB
• Gooseneck length 140 mm (suitable extension to 220 mm available under Art.294624)
• Removable cable
• Cable length 1.8 meters
• Cable diameter: 1.6 mm (cable with 2.2 mm diameter available under Art.289926)
• Improved microphone suspension for even less structure-borne noise
• B + K plug
• Includes special clip for drums
• DAD 6001 XLR phantom power adapter
• Suitable case: Art.489538 (not included in delivery)

• Consists of 1x SCHOEPS CMC 1, microphone amplifier and 1x MK 4 capsule
• Polar pattern: Cardioid
• Frequency range: 40 - 20.000 Hz
• Sensitivity: 13mV/Pa
• Max. sound pressure level: 135 dB
• Signal-to-noise ratio: 80dB-A
• Colour: Grey
• Includes 1x SG20 microphone clip, 1x B5 windscreen and 1x cable tie in an elegant wooden case

• Especially for hihat and acoustic guitar
• Polar pattern: cardioid
• 50 - 18,000 Hz
• 200 Ohm
• Max. SPL: 134 dB
• 9 - 48 Volt Phantom power
• Small housing: 21 x 94 mm
• Weight: 120 g

• Matched pair condenser microphones the t.bone SC140
• With 18 mm capsules
• Cardioid
• Ideal for recording of drum set (overhead, hihat), acoustic guitar or piano
• Frequency range: 20 - 20.000 Hz
• 48V Phantom power required
• With low cut (-3 dB @ 75 Hz o. 150Hz) and pad switch (-10 dB o. -20dB)
• Sensitivity: -38 dBV (12.6mV/ Pa)
• Max. SPL: 130 dB
• Incl. shock mount, wind shields and stereo bar
• Delivered in a aluminium case

• Polar pattern: cardioid
• Frequency response: 20 to 20,000 Hz
• Max. sound pressure level (0.5% THD): 139 / 149 / 159 dB SPL (0/10/20 dB pad)
• Inherent noise: 13 dB(A)

• Consists of 1x SCHOEPS CMC 1, microphone amplifier and 1x MK 2 capsule
• Polar pattern: Cardioid
• Frequency range: 40 - 20.000 Hz
• Sensitivity: 13mV/Pa
• Max. sound pressure level: 135 dB
• Signal-to-noise ratio: 80dB-A
• Colour: Grey
• Includes 1x SG20 microphone clip, 1x B5 windscreen and 1x cable tie in an elegant wooden case

• Polar pattern: cardioid
• Pressure gradient transducer
• Successor of KM 84
• Very smooth frequency responses not only for the 0° axis, but also for lateral (off-axis) sound incidence.
• Frequency response: 20-20000 Hz
• Nominal Impedance: 50 Ohm
• Rated load impedance: 1000 ohms
• Max. output voltage 2540 mV
• Weight: 80 g
• Diameter: 22 mm
• Length: 107 mm
• Includes windscreen and SG 21 stand mount swivel

• Consisting of 2x compact modular reference standard microphone
• Pre-polarized double membrane
• Polar pattern: Cardioid
• Frequency range: 20 - 20,000 Hz
• Dynamic range: 117 dB
• 48 volt phantom power
• Sensitivity nominal 10 mV / Pa, -40 dB re. 1 V / Pa
• Equivalent noise level A-weighted: Type, 20 dB (A) re, 20 μPa (max 23 dB (A))
• Successor of DPA 4011
• Dimensions: 19 x 92 mm
• Weight 64 g
• Black-matte housing

• 3-Pin XLR-M
• Colour: Nextel black

The MKH 416 is a short gun interference tube microphone. Excellent directivity and a compact design, high consonant articulation and feedback rejection are ideal qualities for universal use in film, radio and television, especially for outdoor broadcast applications.

• Polar pattern: Super-cardioid/lobar
• Increased directivity due to interference tube principle
• Very low inherent self-noise
• Highly suitable for outdoor conditions
• High sensitivity
• Balanced, ungrounded output without transformer
• Robust and suitable for adverse climatic conditions
• Matte black all-metal housing
• Audio transmission range: 40 - 20,000 Hz
• Free-field idle transmission factor (1 kHz): 25 mV/Pa +/-1 dB
• Nominal impedance: 25 Ohm
• Peak SPL: 130 dB
• 48 V +/- 4 V Phantom power required
• Weight: 165 g
• Diameter: 19 mm
• Length: 250 mm
• Protective case included
• Optional matching windshield: Sennheiser MZW60-1 Article Nr 133213 (not included)

It can operate on both 12V and 48V phantom power and has low output impedance (25 ohms to P12 and 35 ohms to P48, respectively). The current consumption is 8 mA (P12) or 4 mA (P48).

Externally, the CMC 6 xt differs from the standard version only in the engraving by an "xt" for "extended" on the back. But the essential thing is its CMC 6-based circuit, which has been extended to continue the high-frequency response up to 40kHz.

• With extended frequency response up to 40 kHz
• For capsules from the MK series
• Powered by 12V - 48V phantom power
• Especially low-impedance output, for long cable lengths (up to 100m)

• Polar pattern: super-cardioid
• Frequency range: 40 - 20.000 Hz
• Dynamic range: 117 dB
• Maximum sound pressure level: 130 dB @ 1 KHz
• Required power supply: Phantom power 48V (4.3 mA)
• Connector: 3-pin XLR
• Dimensions: 255 x 19 x 19 mm
• Weight: 163 g
• Colour: Silver
• Includes water and dust resistant aluminum cylinder for storage of the NTG-3, windscreens and RM5 microphone clip
• Optional: elastic mounts SM3, SM4 or SM5 (not included)

• Ideal for DECCA Tree recordings and surround microphone
• Pressure receiver capsule with 12 mm titanium diaphragm
• Unique directivity: In the range of low frequencies it offers a perfect omnidirectional polar pattern; in the middle and high frequency ranges, a narrower sound incidence angle is due to the special construction method
• 119 dB dynamic range
• Extremely low inherent noise level of 15 dB-A
• Frequency range: 20 - 20,000 Hz
• Weight: 800 g
• Included: EA 170 elastic suspension, N 149 A power supply, KT 8 connection cable, power cable and aluminium case

• Polar pattern: Supercardioid
• Frequency range: 100 - 15,000 Hz
• Sensitivity: 16 mV/Pa (+- 2dB)
• Max. sound pressure level: 133 dB
• Requires 48 V phantom power
• 32 cm Gooseneck
• XLR connector
• Colour: Black

• Directional characteristic: Omnidirectional
• Compact design
• Frequency response: 10 - 60,000 Hz
• Maximum sound pressure level: 138 dB SPL
• 25 Ohm
• Exceptionally low inherent self-noise
• Matte coating
• Perfect for studio recordings of instruments such as organs, piano and double bass
• Includes an MZQ 8000 microphone clip, an MZW 8000 windshield, and a plastic case