|
|
|
Active DI Box
- Bluetooth Direct Box with isolated outputs
- Bluetooth 5.0
- External antenna for long-range operation
- Level control
- Max: output level: 30 dBu main output
- 0dBu headphone output
- S/N Ratio: -90dBu
- THD:
- Bluetooth version: 5.0 (up to 50 m)
- Class 2
- 2 Main outputs (3-pole XLR), impedance: 300 Ohm
- 1 Headphone output: 6.3 mm jack
- Supported audio: CODECs SBC, AAC
- Power requirements: 5 V USB (80 mA) or +48 V phantom power (both XLR connected)
- Dimensions (H x W x D): 36 x 126 x 140 mm
- Weight: 0.91 kg
|
168.00 $ |
|
|
|
Guitar DI-box and speaker simulation
- Joe Bonamassa Signature Model
- JB switch: Off / Medium / Heavy - behaves like a mid boost
- Attenuator: 24/12/0 db
- Deep / Normal / Flat voicing switches
- Bright / Normal / Mellow voicing switches
- 1 Input
- 1 Output
- 1 Balanced XLR out
- 1 Thru
- Dimensions (W x H x D): 140 x 95 x 50 mm
|
Price History: Palmer PDI 03 JB
164.00 $ |
|
|
|
Passive 1-Channel Speaker Simulation DI Box
- Removes all uncertainties of amp miking such as microphone choice, acoustic environment and positioning
- Speaker simulation for an authentic guitar sound without a mic
- Can be used as a DI box with the speaker simulation bypassed
- Operation either between the amplifier output and speaker or on the line output
- Three sound presets: Normal, mellow, bright
- Switchable pre-attenuation for adjustment to amp level
- No hum due to the galvanic transformer isolation
- Input: 1x 6.3 mm jack, unbalanced
- Output: 1x XLR, balanced
- Ground lift switch
- Transformer ratio: 1:5
- No power supply required
- Road proof aluminium and steel housing
- Dimensions (W x H x D): 140 x 50 x 68 mm
- Weight: 0.45 kg
- Incl. 1 rewritable tour label and 1 set of rubber feet
- Engineered in Germany
|
Price History: Palmer River ilm
109.00 $ |
|
|
|
Passive 1-Channel Microphone Merge Box
- For two dynamic microphones or two condenser microphones
- Passable for phantom powering
- A reliable problem solver for PA systems with a shortage of mixer channels
- Extremely fail-safe
- For connecting two microphones to one microphone input
- Inputs: 2x XLR, balanced
- Output: 1x XLR, balanced
- Input impedance (1 kHz): 644 Ohm
- Output impedance (1 kHz): 400 Ohm
- No power supply required
- Road-proof aluminium and steel housing
- Dimensions (W x H x D): 50 x 140 x 68 mm
- Weight: 0.36 kg
- Incl. 1 rewritable tour label and 1 set of rubber feet
- Engineered in Germany
|
Price History: Palmer River tauber
48.00 $ |
|
|
|
Palmer trave; passive 1 channel DI box; road-ready aluminum and steel enclosure; for playing out DAW/mixer signals to guitar/bass amplifiers; conditioning of a balanced line signal for unbalanced instrument input; eliminates hum loops, optimal impedance matching; unaltered sound transmission; connections: input: 1x balanced XLR, output: 1x unbalanced 6.3 mm jack; output level potentiometer; ground lift switchable; input level switchable -10dBV/+4 dBu; output level continuously variable; transformer ratio: 1:3; no power supply necessary; dimensions (WxHxD): 50 x 140 x 68 mm; weight: 0.4 kg; included in delivery: 1x Palmer trave, 1x label (tour label), 1x rubber feet; engineered in Germany
|
Price History: Palmer trave
79.00 $ |
|
|
|
Passive 2-Channel Dual / Mono DI Box
- 2 Inputs 6.3 mm jack
- 2 Link outputs 6.3 mm jack
- 2 XLR Outputs
- Ground / lift switch
- PAD switch (-20 dB / - 40 dB) suitable for keyboard, acoustic/electric guitar, bass, etc.
- Dimensions: 150 x 40 x 100 mm
- Weight: 0.5 kg
|
Price History: Millenium Pocket DI 2
31.00 $ |
|
|
|
Passive 1-Channel Line Isolator
- For connecting a laptop or consumer audio device to a professional microphone input
- Mixes two input channels (e.g. laptop headphone output) to mono
- Galvanic isolation via a transformer ensures interference-free sound
- Optimal adjustment of level and impedance
- Balanced output allows longer cable runs without interference
- Isolated transformer
- Ground lift switch
- Inputs: 2x RCA, unbalanced
- Output: 1x XLR, balanced
- Transformer ratio: 1:1
- No power supply necessary
- Aluminium and steel housing
- Dimensions (W x H x D): 50 x 140 x 68 mm
- Weight: 0.39 kg
- Incl. 1 inscription label (tour label) and 1 set of rubber feet
- Engineered in Germany
|
Price History: Palmer River vils
85.00 $ |
|
|
|
Active DI Box
- Specially for piezo users of orchestral instruments
- Smooths out peaks
- 48 V Phantom power
- Handle in
- Jack out
- XLR out
- Switchable HPF
- Switchable 180° phase
- Metal housing
- Colour: Brown
|
Price History: Radial Engineering SB-4
107.00 $ |
|
|
|
Active DI Box
- XLR/KLI in
- KLI link pad -20 dB
- XLR out
- Ground lift
- PAD
- Galvanic isolation
- Sturdy metal housing with corner protectors
- Battery / phantom power
|
Price History: LD Systems LDI 02
41.00 $ |
|
|
|
Active Stereo DI Box
- OEP / Carnhill transformer
- Discrete Class-A-FET circuit
- Power supply with +48 V phantom power with LED indicator
- Power consumption: 3.8 mA
- Switch for pad -15 dB
- Switch for ground lift
- Solid aluminium construction
- WIMA and Nichicon capacitors
- Input: 6.3 mm jack (per channel)
- Outputs: XLR & 6.3 mm jack (Thru) (per channel)
- Metal film resistors 1% 1/4W
- Frequency range: 20 Hz - 70 kHz, ± 2 dB
- Input impedance: 1 MΩ
- Output impedance:
- Maximum input level: >1 dBV (without pad), 17 dBV (with pad)
- Dimensions (W x H x D): 100 x 50 x 100 mm
- Weight: 578 g
- Made in the UK
|
Price History: Telefunken TDA-2
429.00 $ |
|
|
|
2-Channel Stereo Interface for Guitar Effects (Stand-Alone)
- Frequency range: 20 - 20000 Hz
- Inputs and outputs: Jack/XLR combo
- Steel chassis
- Incl. 15 V DC power supply
|
Price History: Radial Engineering EXTC-Stereo
399.00 $ |
|
|
|
DI Box with Switching Function
- Multi-output DI box
- Fast switching between four outputs with just one footswitch
- 4 XLR outputs for full control over 4 instruments
- Prevents ground loops
- Mute button for quiet cable changeover
- Jack output for tuner
- Robust construction - resistant on every stage
- Power supply via 9 V DC power supply (negative polarity inside, not included in delivery - suitable power supply units: Art.409939 or Art. 119603)
|
Price History: Radial Engineering 4Play
341.00 $ |
|
|
|
Active DI Box
- Specially for acoustic guitar
- 48 V Phantom
- Jack input
- Jack output
- XLR output
- Switchable 15 dB pad
- Switchable 180° phase
- Metal housing
- Colour: Blue
|
Price History: Radial Engineering SB-1
85.00 $ |
|
|
|
Passive Mono DI Box
- Transformer from OEP / Carnhill
- Switch for pad -15 dB
- Switch for ground lift
- Solid aluminium construction
- Capacitors from WIMA and Nichicon
- Input: 6.3 mm jack
- Output: XLR & 6.3 mm jack (Thru)
- Metal film resistors 1% 1 / 4W
- Frequency range: 10 Hz - 40 kHz, ± 2 dB
- Input-output impedance: > 100 kOhm
- Maximum input level: > 18 dBV
- Dimensions (W x H x D): 100 x 50 x 100 mm
- Weight: 482 g
- Made in the UK
|
Price History: Telefunken TDP-1
241.00 $ |
|
|
|
Passive DI Box
- In a strong metal housing for portable applications
- Convert from high-impedance to low-impedance
- From instrument connection to microphone inputs
- 1x jack in - 1x parallel out, 1x isolated XLR out
- High-quality ProCo transformer CBT-1 (20 kOhm / 150 Ohm)
- Ground lift switch prevents ground loops
|
Price History: Proco CB-1
97.00 $ |
|
|
|
Passive USB-DI box with USB-C
- For smartphones, tablets and computers
- Power supply via USB-C port
- 32 bit / 192 kHz digital audio converter (DAC)
- 3.5 mm jack monitoring headphone output
- 2 XLR outputs
- Ground lift switch
- Frequency response: 20 - 20.000 Hz ±0.5dB
- Output impedance: 50 Ohm
- Isolating transformer type: 1:1 + 1:1
- Steel housing
- Dimensions (W x D x H): 78 x 124 x 46 mm
- Weight: 0.64 kg
|
Price History: UNiKA PRO-USB
242.00 $ |
|
|
|
Passive Stereo DI Box
- OEP / Carnhill transformer
- Switch for pad -15 dB
- Switch for ground lift
- Solid aluminium construction
- WIMA and Nichicon capacitors
- Input: 6.3 mm jack (per channel)
- Outputs: XLR & 6.3 mm jack (Thru) (per channel)
- Metal film resistors 1% 1/4W
- Frequency range: 10 Hz - 40 kHz, ± 2 dB
- Input-output impedance: > 100 kOhm
- Maximum input level: > 18 dBV
- Dimensions (W x H x D): 100 x 50 x 100 mm
- Weight: 578 g
- Made in the UK
|
Price History: Telefunken TDP-2
384.00 $ |
|
|
|
Guitar DI Box with Speaker Simulation
- Completely analogue
- Ground between amp and box
- Simulated microphone position switch
- Switchable input volume: -10 / -30 dB
- Switchable ground lift
- Balanced XLR output
Note: no load box, a load resistor must always be used!
|
Price History: Friedman Mic-No-Mo
98.00 $ |
|
|
|
Passive DI Box Direct Injection
- 1-Channel version
- PAD switch (0dB/-30dB)
- Jack as an input connector
- Balanced XLR output
- Input impedance: 68 kOhm
- Output impedance: 600 Ohms
- Transfer ratio: 10: 1
- Maximum output level: +6 dBu
- Dimensions: 110 x 73 x 42 mm
- 5 Year warranty from manufacturer
|
Price History: Palmer PAN 01
43.00 $ |
|
|
|
DI and Reamping Box for Guitar Amplifiers
- Adjustable input level
- Galvanic isolation of inputs and outputs
- Switchable ground lift for amp and line out
- XLR line out
- Dimensions: 137 x 158 x 45 mm
- Weight: 0.95 kg
- Incl. 9 V power supply and TONEX SE software bundle
|
Price History: IK Multimedia ToneX Capture
174.00 $ |
