Special Speakers

• Loudspeaker equipment: 1x 6.5" woofer and 1x 1.25" tweeter
• Weatherproof according to IP55
• Removable and rotatable logos
• Euroblock connections
• Frequency response (-10dB): 62 - 20000 Hz
• Dispersion pattern: 115° conical
• Power: RMS 125 W / peak 500 W
• Sensitivity (SPL/1W@1m): 89 dB
• Max SPL @1m: 110 dB / 116 dB peak
• Transformer outputs: 70V: 2.5, 5, 10, 20, 40, 80 W, bypass, 100V: 5, 10, 20, 40, 80 W, bypass
• Impedance: 8 Ohm
• Cable length: 4.5 m
• Dimensions (Ø x D): 308 x 375 mm
• Weight: 5.7 kg
• Colour: Black
• Package quantity: 1 pair

• 100% waterproof
• 30 W power at 8 Ohms
• Frequency range: 100 Hz - 20 kHz
• 5 m connector cable
• Easy mounting with bracket or screws
• Dimensions: 137 mm x 137 mm x 53 mm

Note: For low impedance operation, a protection circuit should be used to limit the power consumption

At ceiling heights of more than 6 m, sound reinforcement with ceiling installation loudspeakers is generally no longer appropriate, since the ratio of direct sound to the indirect sound component from the room acoustics becomes too unfavourable in the listening level and the speech is greatly blurred. For this reason, we offer loudspeakers suspended from the ceiling in high ceilings, such as, for example, Our spherical loudspeakers KL 1603 and KL 1603/2. The low-cost 1-way spherical loudspeaker KL 1603 is equipped with a 166 mm wide loudspeaker chassis and is suitable both for the transmission of speech as well as for background music. We recommend the KL 1603/2 2-way loudspeaker for particularly high-quality PA applications that go beyond background grounding. It is equipped with a powerful 166 mm coax chassis. This ensures the famous WHD brilliance in the high-frequency range - and, of course, not to forget - for a wider beam angle to higher frequencies. The ceiling attachment is carried out by means of a suspended strain relief which is concealed by a canopy.

• In 2-way technology
• Suspension over cable strain relief
• Connection: 12/6/3 / 1.5 W
• Cable length: 2.5 m
• Housing: White plastic

• For stimulating bending waves on plates
• The unit can be attached to the surface of the plate by gluing or screwing
• Application possibilities: Signal output in applications where normal speakers can not be installed for optical reasons or for protection against environmental conditions or vandalism
• Maximum power: 50 W
• Nominal impedance Z: 8 Ohms
• Voice coil diameter: 35.6 mm
• Total weight: 0.16 kg
• Connections: 4.8 x 0.8 mm (+), 2.8 x 0.8 mm (-) temperature range: -25 - 70 °C

• Lightweight housing
• Protection class: IP44 (protection against splashing water from all directions)
• With 8"/ 1" coaxial loudspeaker
• Rated power: 480 W peak / 120 RMS
• Frequency range: 90 - 15,000 Hz (-10 dB)
• Impedance: 8 Ohm
• Max. SPL: 122 dB
• Dispersion: 60° x 60°
• Dimensions: 325 x 325 x 345 mm
• Weight: 12.5 kg

• 1x 2.25" Driver
• Removable and rotatable logos
• Euroblock connectors
• Frequency response (-10dB): 83 - 19000 Hz
• Coverage angle: 130
• Power: RMS 20W / peak 80W
• Sensitivity (SPL/1W@1m): 87 dB
• Max. SPL @1m: 100 dB / 106 dB peak
• Transformer outputs: 70V: 1, 2, 4, 8, 16 W, bypass, 100V: 2, 4, 8, 16 W, bypass
• Impedance: 16 Ohm
• Cable length: 4.5 m
• Dimensions (ØxD): 149 × 183 mm
• Weight: 1.47 kg
• Colour: White
• Package quantity: 1 pair

• 1x 2.25" Driver
• Removable and rotatable logos
• Euroblock connectors
• Frequency response (-10dB): 83 - 19000 Hz
• Coverage angle: 130
• Power: RMS 20W / peak 80W
• Sensitivity (SPL/1W@1m): 87 dB
• Max. SPL @1m: 100 dB / 106 dB peak
• Transformer outputs: 70V: 1, 2, 4, 8, 16 W, bypass, 100V: 2, 4, 8, 16 W, bypass
• Impedance: 16 Ohm
• Cable length: 4.5 m
• Dimensions (ØxD): 149 × 183 mm
• Weight: 1.47 kg
• Colour: Black
• Package quantity: 1 pair

• Speaker configuration: 1x 5.25" woofer and 1x 1" tweeter
• Removable and rotatable logos
• Euroblock connections
• Frequency response (-10dB): 65 - 20000 Hz
• Dispersion pattern: 120° conical
• Power: RMS 60 W / peak 240 W
• Sensitivity (SPL/1W@1m): 87 dB
• Max SPL @1m: 105 dB / 111 dB peak
• Transformer outputs: 70V: 3, 6, 12, 25, 50 W, bypass, 100V: 6, 12, 25, 50 W, bypass
• Impedance: 8 Ohm
• Cable length: 4.5 m
• Dimensions (Ø x D): 259 x 300 mm
• Weight: 4.1 kg
• Colour: Black
• Package quantity: 1 pair

• Power: 16 / 25 Watt (sine wave / music)
• Equipped with: 5.25" + 1" Coaxial system
• Frequency range: 80 - 20000 Hz
• Impedance: 8 Ohm (speaker impedance, without external connection)
• 100 V Transformer power tappings: 4 / 8 / 16 W
• Dimensions (diameter): 180 mm
• Weight: 1.67 kg
• Installation: 3 m cable with metal safety cable
• Colour: White

• Mushroom shape
• Coaxial 2-way speaker
• Equipped with: 8" woofer, 1" tweeter
• 360° Coverage pattern
• Frequency response: 47 - 16000 Hz (-10dB)
• Maximum level: 108 dB
• Power rating: 100 Watt RMS
• Impedance: 8 Ohm
• 100 Volt transformer (60, 30, 15 Watt)
• Dimensions (H x W x D): 524 x 355 x 355 mm
• Weight: 7.8 kg
• Colour: Green

• Electronics are insulated against temporary infiltration of liquids
• Power rating: 50 W / 100 W (peak)
• Impedance: 4 Ohm
• Cable length: 3 m
• Weight: 1.2 kg

• Speaker configuration: 1x 3.25" woofer and 1x 0.75" tweeter
• Removable and rotatable logos
• Euroblock connectors
• Frequency response (-10dB): 75 - 20000 Hz
• Coverage angle: 130° conical
• Power: RMS 30 W / peak 120 W
• Sensitivity (SPL/1W@1m): 84 dB
• Max SPL @1m: 99 dB / 105 dB peak
• Transformer outputs: 70V: 3, 6, 12, 25 W, bypass, 100V: 6, 12, 25 W, bypass
• Impedance: 8 Ohm
• Cable length: 4.5 m
• Dimensions (Ø x D): 207 x 248 mm
• Weight: 2.5 kg
• Colour: White
• Package quantity: 1 pair

• Speaker configuration: 1x 5.25" woofer and 1x 1" tweeter
• Removable and rotatable logos
• Euroblock connections
• Frequency response (-10dB): 65 - 20000 Hz
• Dispersion pattern: 120° conical
• Power: RMS 60 W / peak 240 W
• Sensitivity (SPL/1W@1m): 87 dB
• Max SPL @1m: 105 dB / 111 dB peak
• Transformer outputs: 70V: 3, 6, 12, 25, 50 W, bypass, 100V: 6, 12, 25, 50 W, bypass
• Impedance: 8 Ohm
• Cable length: 4.5 m
• Dimensions (Ø x D): 259 x 300 mm
• Weight: 4.1 kg
• Colour: White
• Package quantity: 1 pair

Electro dynamical exciter for stimulating bending waves on plates. The unit can be attached to the surface of the plate by gluing or screwing. Typical applications: Signal output in every application where normal speakers can not be installed for optical reasons or for protection against environment conditions or vandalism.

• Maximum power 25 W
• Rated impedance Z 8 Ohm
• Voice coil diameter: 32.5 mm
• Net weight: 0.12 kg
• Connections: 4.8 x 0.8 mm () 2.8 x 0.8 mm (-)
• Temperature range -25 ... 70 ° C

Shure STEM Speaker - Conference Room Speaker, Table, Wall and Ceiling Mount Options, LED Illuminated Ring, Aluminium Inner Housing, Mounting Flange, Table Legs, with Stand for Tripod Mounting, Aluminium Ring for Ceiling Mounting, Power over Ethernet (PoE+), 4.6 m CAT 6 Ethernet Cable, Dimensions (W x H): 229 x 102 mm, Colour: White

• Power rating: 50/70 W
• Frequency range: 50 to 20,000 Hz
• 25 W-ring core transformer
• 2500 mm steel cable / strain relief
• 330 mm Sphere diameter
• Excellent bass
• High speech intelligibility through 360 ° radiation
• Colour: RAL 9010 white

• Mushroom shape
• Coaxial 2-way speaker
• Equipped with: 5.25" woofer, 0.75" tweeter
• 360° Coverage pattern
• Frequency response: 55 - 18000 Hz (-10dB)
• Maximum level: 105 dB
• Power rating: 75 Watt RMS
• Impedance: 8 Ohm
• 100 Volt transformer (30, 15, 7.5 Watt)
• Dimensions (H x W x D): 432 x 291 x 291 mm
• Weight: 5.5 kg
• Colour: Green

• Speaker configuration: 1x 3.25" woofer and 1x 0.75" tweeter
• Removable and rotatable logos
• Euroblock connectors
• Frequency response (-10dB): 75 - 20000 Hz
• Coverage angle: 130° conical
• Power: RMS 30 W / peak 120 W
• Sensitivity (SPL/1W@1m): 84 dB
• Max SPL @1m: 99 dB / 105 dB peak
• Transformer outputs: 70V: 3, 6, 12, 25 W, bypass, 100V: 6, 12, 25 W, bypass
• Impedance: 8 Ohm
• Cable length: 4.5 m
• Dimensions (Ø x D): 207 x 248 mm
• Weight: 2.5 kg
• Colour: Black
• Package quantity: 1 pair

• Loudspeaker equipment: 1x 6.5" woofer and 1x 1.25" tweeter
• Weatherproof according to IP55
• Removable and rotatable logos
• Euroblock connections
• Frequency response (-10dB): 62 - 20000 Hz
• Dispersion pattern: 115° conical
• Power: RMS 125 W / peak 500 W
• Sensitivity (SPL/1W@1m): 89 dB
• Max SPL @1m: 110 dB / 116 dB peak
• Transformer outputs: 70V: 2.5, 5, 10, 20, 40, 80 W, bypass, 100V: 5, 10, 20, 40, 80 W, bypass
• Impedance: 8 Ohm
• Cable length: 4.5 m
• Dimensions (Ø x D): 308 x 375 mm
• Weight: 5.7 kg
• Colour: White
• Package quantity: 1 pair

• For stimulating bending waves on plates
• The unit can be attached to the surface of the plate by gluing or screwing
• Application possibilities: Signal output in applications where normal speakers can not be installed for optical reasons or for protection against environmental conditions or vandalism
• Maximum power: 25 W
• Nominal impedance Z: 8 Ohms
• Voice coil diameter: 32.6 mm
• Total weight: 0.125 kg
• Connections: 4.8 x 0.8 mm (+) 2.8 x 0.8 mm (-)
• Temperature range: -25 up to +70 °C
• Corresponding adhesive pad: Article Nr 426666 (not included, must be ordered separately)