FR-Speakers

• Rated power: 5 W RMS
• Impedance: 8 Ohm
• SPL: 84dB (1W / 1M)
• Frequency range: 150 Hz - 20,000 Hz

• Size: 4.5 cm (1.8")
• With aluminium membrane
• Transparent plastic basket with two mounting holes
• Balanced frequency response and very good low-frequency reproduction
• Suitable for applications that require small dimensions, good music and voice reproduction at the same time
• Max. input level: 4 W
• Maximum power: 8 W
• Nominal impedance Z: 8 Ohm
• Frequency range (-10 dB): 90 - 20,000 Hz
• Mean sound pressure level: 79 dB ( 1W/1m)
• Resonant frequency fs: 192 Hz
• Voice coil diameter: 17 mm
• Cutout: 45 mm
• Weight: 0.032 kg

• Size: 3.3
• 30 W RMS
• 8 Ohm
• 88 db / w / m
• 100 to 20,000 Hz (-10 dB)
• The high quality, moisture-impregnated metal chassis suited for use in column speakers and bass reflex enclosures

• 4.5 cm (1.8 ") mini speaker with aluminium diaphragm and transparent plastic basket with two fixing holes
• Balanced frequency response and very good bass reproduction
• Suitable for applications that require small dimensions and good music and voice reproduction
• Rated load capacity 4 W
• Musicability 8 W
• Nominal impedance Z 4 Ohm
• Transmission range (-10 dB) 90-20000 Hz
• Average sound pressure level 79 dB (1 W / 1 m)
• Resonance frequency fs 158 Hz
• Oscillating coil diameter 17 mm
• Baffle opening 45 mm
• Weight net 0.032 kg

• Size: 4 cm (1.6 ")
• Impedance: 8 ohms
• With coated paper membrane
• Black metal basket
• Compact design thanks to neodymium
• The interplay of the individual components ensures a very homogeneous playback quality

• Power: 30 W RMS (60 W peak)
• Impedance: 8 Ohm
• Frequency response: 20 - 20,000 Hz

• 8 W RMS
• 8 Ohm
• 88db at 1 W at 1 m
• 200 Hz - 20 kHz (-10 dB)

Note : The high quality, moisture-impregnated metal chassis suited for use in column speakers and bass reflex enclosures

• Power rating: 8 W RMS
• Impedance: 4 Ohm
• 88 db / w / m
• Frequency range: 200 - 20,000 (-10 dB)
• High quality, moisture impregnated metal housing
• Suitable for column speakers and bass reflex cabinets

• A high efficiency and a very balanced frequency response without large fluctuations characterize this high-end loudspeaker. This is achieved by the very light paper membrane, the fabric edge as well as the optimized drive with a 25 mm oscillating coil, which optimally utilizes the magnetic field in the air gap (oscillation coil overhang). The vibrating coil carrier from Kapton is ventilated. The sturdy aluminum die-cast basket not only makes a good figure, but also contributes to the fact that the mechanical losses are extremely low with its openings for the back-ventilation of the centering. Distortions remain uniformly at an extremely low level. The B 200 is excellently suited for use in high-quality, high-performance 1-way loudspeakers, with classic closed or ventilated housings with even more exotic concepts such as horns or open sound walls.
• Load capacity 40 W RMS
• Impedance 6 Ohm
• Sound pressure 96db / w / m
• Frequency response 40 Hz-18 kHz (-10 db)
• High-quality aluminum die-cast chassis with far-reaching transmission characteristics with minimum distortion.

• Size: 5.8 cm (2,3 ")
• Membrane of coated paper
• Impedance: 8 ohms
• Rubber surround
• Square metal basket with 4 fixing holes and rubber seal
• Flat connectors with 5.2 x 0.5 mm (+) and 2.8 x 0.5 mm (-)
• Very linear and wide frequency response at low resonant frequencies allows universal use
• Also for hi-fi applications

• Size: 2"
• Rated power: 5 W RMS
• Impedance: 8 Ohm
• Max. SPL: 86 dB (1 W / 1M)
• Frequency range: 120 to 20,000 Hz
• Suitable as a full-range speaker or midrange driver in speaker systems for Hi-Fis and sound systems as well as ELA systems up to 100V