|
|
2-Channel Analog Power Amplifier
- 2 x 300 W at 4 ohms
- 2 x 200 W at 8 ohms
- 600 W at 8 ohms, bridge mono
- Signal-to-noise ratio: > 100 dB
- Damping factor: > 200
- Inputs: XLR / RCA
- Outputs: Speaker Twist and binding posts
- Start-up delay
- Short circuit protection
- 19" / 2 RU
- Depth in rack: 31.5 cm
- Weight: 11.4 kg
|
Price History: Crown XLi 800
299.00 $ |
|
|
Mini Power Amplifier Module
- Power: 2 x 20 W
- For fixing directly to flat screen or in suspended ceilings
- Input via mini jack
- Output via phoenix terminal block
- Power supply via external mains adaptor
- Integrated limiter
- Dimensions: 145 x 95 x 45 mm
- Mounting brackets included
|
Price History: the t.amp TA50
70.00 $ |
|
|
Studio Power Amp
- Linear power amplifier for studios, events and Hi-Fi applications
- Convection-cooled for silent operation (no fan)
- Protection circuits for DC resistance and overheating per channel
- Fast-response switching power supply with high efficiency
- Output Power: 2 x 400 W at 4 Ohm / 2 x 220 W at 8 Ohm / 1 x 800 W at 8 Ohm (bridged)
- Inputs: 2x XLR, 6.3 mm TRS, RCA
- Outputs: 2x Speaker Twist and screw terminals
- Dimensions: 19" x 2 U x 220 mm deep
- Weight: 3.2 kg
|
Price History: Behringer A800
279.00 $ |
|
|
Power Amplifier
- DSP controlled
- Power: 2x 1600 W (2 ohm), 1200 W (4 ohm), 650 W (8 ohm), 2400 W bridge (8 ohm), 3200 W bridge (4 ohm)
- DSP Applications: input EQ with 6 parametric filters per channel with adjustable Q- factor and +/- 15 dB gain
- Crossover with high and low pass
- Each channel with 6/ 12/ 18/ 24 dB per octave and switchable polarity
- Output EQ with 8 parametric filters per channel with adjustable Q- factor and +/- 15 dB gain
- Delay up to 50 ms
- Subharmonic synth
- Peak plus limiter with adjustable threshold, attack and release
- 50 Presets
- 3 Switchable fan-mode controls
- HiQnet band manager and system architect control software via USB port
- Display for the mains voltage and power supply temperature
- Connectors: 2x NL4 speaker twist out, binding post out, XLR in/ out
- Dimensions: 19” (485 mm) x 2 U (89 mm) x 311 mm
- Weight 8.4 Kg
|
Price History: Crown Xti 4002
1,069.00 $ |
|
|
Power amplifier
- Professional power amplifier
- 2x 1500 W at 4 ohm
- 2x 1100 W at 8 ohm
- 2x 1800 W at 2 ohm
- 2 Ohm stable
- Built-in limiter
- Softstart
- Fully protected circuit design
- Temperature controlled fan
- Ground lift switch
- Generously dimensioned transformer
- 19" Rack format with 3 rack units
- Input A: XLR/6.3 mm jack; Input B: XLR/6.3 mm jack
- Channel A output: Speaker twist; Bridge out: Speaker twist; Channel B Output: Speaker twist
- Dimensions: 482 x 480 x 132 mm
- Weight: 37 kg
|
Price History: the t.amp Proline 3000
599.00 $ |
|
|
Power Amplifier
- Lightweight 2-channel Class D amplifier
- Power: 2x 900 W at 4 Ωs, 2x 1500 W at 2 Ωs
- Inputs: Jack and XLR
- Outputs: Speaker Twist
- Integrated crossover
- Integrated limiter
- Mains, signal and limit LEDs
- Design: 19" / 2 RU
- Case depth: 231 mm
- Weight: 3.5 kg
|
Price History: Behringer NX3000
295.00 $ |
|
|
Amplifier
- 4 x 100 W at 8 Ohm
- 4 x 140 W at 4 Ohm
- 6.3 mm jack or Euroblock for the input signal
- Binding post for the output
- Built-in fan
- Installation depth approx. 34 cm
- Format: 19"/ 1 U
- Weight: 9 kg
|
625.00 $ |
|
|
Switched-mode Power Supply Amplifier
- 4x 550 W/ 4 Ohm
- 4x 350 W/ 8 Ohm
- 2x 1000 W/ 8 Ohm (bridge mode)
- XLR inputs
- Speaker twist outputs
- Dimensions: 482 x 277 x 88 mm
- Size: 19"/ 2 RU
- Weight: 7.5 kg
|
Price History: the t.amp TSA 4-300
299.00 $ |
|
|
Seeburg Acoustic Line S 3 - 4-channel digital power amplifier, Class-D, 4x 600 W @ 2-8 ohms, 4.3" display and push encoder, DSP with IIR and FIR filter, RMS and peak limiter, intelligent power sharing when driving asymmetrical loads, temperature-controlled fans, inputs: 4x XLR analogue, 2x AES 3 (switchable), 2x RJ45, 1x USB-B, outputs: 4x Speakon NL4, 4x XLR analogue, 2 U, dimensions (W x H x D): 483 x 88 x 330 mm, weight: 6.7 kg
|
Price History: Seeburg Acoustic Line S 3
3,199.00 $ |
|
|
DriveCore Power amplifier
- With Class-D circuit
- Amplifier modes: 2-channel stereo, mono bridged or Y mode
- Power: 2x 1200 W / 2 Ohm, 2x 775 W / 4 Ohm, 2x 440 W / 8 Ohm, bridged 1x 2400 W / 4 Ohm, bridged 1x 1550 W / 8 Ohm
- 24 dB Linkwitz-Riley crossover
- Input sensitivity 1.4 or 0,775 V
- Large front display for easy operation
- Black-Out mode automatically switches off the display
- Lock-Out mode against incorrect operation
- Remote power for remotely turning on and off
- PeakX limiter per channel
- Quiet, temperature controlled fan
- Robust metal chassis
- 5 status LEDs per channel
- Connections: XLR, jack and RCA inputs, 2x Speaker Twist and screw outputs
- Body shape: 19" / 2U
- Installation depth: 27.2 cm
- Weight: 4.9 kg
|
Price History: Crown XLS 2502
649.00 $ |
|
|
Live Performance DSP Amplifier
- 2-Ohm stability
- Intuitive system control software for easy setup and control
- Balanced XLR in / out
- Speaker Twist connectors
- Dimensions (W x H x D): 483 x 88 x 462.4 mm
- Weight: 15.2 kg
Maximum Power Single Channel: - 2 Ohm: 1600 W
- 2.6 Ohm: 1300 W
- 4 Ohm: 950 W
- 8 Ohm: 480 W
Maximum Power Dual Channel: - 2 Ohm: 1400 W
- 2.6 Ohm: 1200 W
- 4 Ohm: 850 W
- 8 Ohm: 450 W
|
Price History: Dynacord L1800FD DSP
789.00 $ |
|
|
Power amplifier
- 2 x 150 W at 4 ohms
- 2 x 85 W at 8 ohms
- Balanced inputs with XLR and jack
- Bridgeable
- Speaker Twist and binding post outputs for LS Out
- All protection circuits including Softstart
- Switchable input sensitivity of 0.775 Vrms to 1.4 Vrms, or can be switched to 26 dB Gain
- Damping factor > 150
- Convection cooled (no fan)
- 19", 2U, depth 32 cm (without handles)
- Weight 11.5 kg
|
Price History: the t.amp S-150 MK II
159.00 $ |
|
|
Live Performance DSP Amplifier
- 2-Ohm stability
- Intuitive system control software for easy setup and control
- Balanced XLR in / out
- Speaker Twist connectors
- Dimensions (W x H x D): 483 x 88 x 462.4 mm
- Weight: 18.2 kg
Maximum Power Single Channel: - 2 Ohm: 3200 W
- 2.7 Ohm: 2700 W
- 4 Ohm: 1800 W
- 8 Ohm: 950 W
Maximum Power Dual Channel: - 2.7 Ohm: 2500 W
- 4 Ohm: 1700 W
- 8 Ohm: 900 W
- Bridged: 4 Ohm: 6000 W
- Bridged 8 Ohm: 3400 W
|
Price History: Dynacord L3600FD DSP
1,390.00 $ |
|
|
Quadro Amplifier
- Power: 4x 250 W per channel at 8 ohm, 4x 400 W per channel at 4 ohm
- Frequency response: 20 - 20000 Hz
- Input: Thomann XLR
- Output: Speaker Twist
- For input channels 1 and 2 as well as 3 and 4 bridged use is possible via switch
- Protection circuit: DC
- Short circuit protection
- Overheating protection
- Limiter
- Standby switch
- Voltage: 230 V, 50 Hz
- Dimensions: (W x D x H): 482 x 408 x 88 mm, 19" / 2 U
- Weight: 15 kg
|
Price History: the t.amp E4-250
266.00 $ |
|
|
Stereo Amplifier
- Output power: 2 x 15 watts at 4 ohms or 2 x 8 watts at 8 ohms
- ENERGY STAR compliant amplifier
- Signal-to-noise ratio of 90 dB with 0.1% harmonic distortion
- Disable automatic shutdown for 24/7 operation
- Extron-patented CDRS ™ (Class D Ripple Suppression) technology
- Controls for depths, treble and input levels
- Inputs: RCA, 3.5 mm stereo jack, terminal balanced
- Output: Terminal, VCA 3-pin. terminal
- Dimensions (H x W x D): 4.3 x 10.9 x 7.6 cm
- External power supply (60-844-03)
|
Price History: Extron MPA 152 Plus
468.00 $ |
|
|
Studio Power Amp
- Convection-cooled studio amplifier
- Class AB
- Power: 2 x 300 W at 4 Ohm, 2 x 200 W at 8 Ohm
- Bridged Mono: 500 W at 8 Ohm
- Frequency range: 20 - 20,000 Hz
- THD:
- Signal to noise ratio: > 94 dB
- Inputs: 2x XLR female
- Outputs: 2x XLR male Link, 2x screw terminal and 2x Speaker Twist
- Dimensions: 483 x 457 x 89 mm
- Format: 19" / 2 U
- Weight: 20 kg
|
Price History: Avantone CLA-200
898.00 $ |
|
|
Power Amplifier
- 2x 900 W/ 4 Ohm
- 2x 550 W/ 8 Ohm
- 2x 1250 W/ 2 Ohm
- 1x 1800 W/ 8 Ohm (bridge mode)
- 2 Ohm compatible
- Symmetrical XLR in/ out
- Speaker twist out
- Ground lift
- Limiter
- LPN Filter (low pass notch) protection
- Temperature switch-off
- DC protection
- Fan
- Weight: 16.3 kg
- Dimensions: 483 x 88.1 x 421.5 mm
- Format: 19", 2 RU
|
Price History: Dynacord SL1800
849.00 $ |
|
|
Dual-Channel Class D Power Amplifier
- Developed in cooperation with Bettermaker
- Especially suitable for Auratone 5C Super Sound Cubes (article no. 366426 and article no. 374030 - both not included)
- Same base surface as Auratone 5C
- Output power: 2x 30 Watt at 8 Ohm (0.05% THD+N)
- Frequency response: 20 - 20,000 Hz (+/- 0.4 dB)
- Signal / noise ratio: > 100 dB
- Crosstalk:
- Inputs: 2x XLR balanced
- Output: 4 Gold plated screw connections
- Status LED with clip indicator
- On/Off switch
- Dimensions: 170 x 180 x 45 mm
- Weight: 1.25 kg
- Rack bracket and power cable included
|
Price History: Auratone A2-30
338.00 $ |
|
|
DriveCore Power amplifier
- With Class-D circuit
- Power: 2x 550 Watt / 2 Ohm, 2x 350 Watt / 4 Ohm, 2x 215 Watt / 8 Ohm, bridged 1x 1100 Watt / 4 Ohm, bridged 1x 700 Watt / 8 Ohm
- Amplifier modes: 2-channel stereo, mono bridged or Y mode
- 24 dB Linkwitz-Riley crossover
- Input Sensitivity 1.4 or 0.775 V
- Large front display for easy operation
- Black-Out mode automatically switches off the display
- Lock-out mode against incorrect operation
- Remote power for remotely turning on and off
- PeakX limiter per channel
- Quiet, temperature controlled fan
- Rugged metal housing
- 5 status LEDs per channel
- Connections: XLR, jack and RCA inputs, 2x Speaker Twist and screw outputs
- Design: 19" / 2U
- Depth: 19.6 cm
- Weight: 3.9 kg
|
Price History: Crown XLS 1002
375.00 $ |