MIDI Tools

• Routes MIDI data from input A or B to a MIDI output
• MIDI inputs can be switched by means of a foot switch (not included) or MIDI program changes
• LED display
• Power supply via MIDI

• Wireless MIDI system based on Bluetooth 5 with low latency (3 ms)
• Transmission of all MIDI messages incl. MIDI clock and SysEx data
• Compatible with WIDI Master, WIDI Jack, WIDI Hub4, WIDI Ped3 and WIDI BUD
• Direct connection possible with Bluetooth MIDI devices
• Power supply via USB bus
• Also offers an external power supply solution via USB-C (5V) e.g. for power banks
• Magnet on the underside for mounting
• Range: 20 m without obstacles
• Connections: 1 x USB-C host/device and 1 x USB-C (5V) USB power
• Dimensions (W x H x D): 34 x 14 x 38 mm
• Weight: 19 g

• Converts analogue control voltages and gate signals into MIDI signals
• An accurate CV tracking to generate MIDI notes including the processing of MIDI pitch bend commands
• 2 Programmable Aux CV inputs for generating MIDI CC commands
• Works with pitch scales 1 V/oct. 1.2 V/oct and Hz/V
• Gate input switchable between S-trigger and V-trigger
• 16-bit AD-converter for pitch-CV
• Conversion of clock signals to MIDI clock
• Transpose
• Auto-Tune and Fine-Tune functionality
• Memory locations available: 32
• Inputs for CV, aux 1, aux 2 and gate (3.5 mm jack)
• MIDI output (5-pin DIN)
• Dimensions (W x D x H): 122 x 75 x 42 mm
• Weight: 170 g
• Incl. an external power supply (9 V DC)

• With 8x MIDI inputs to 2x MIDI outputs
• Dimensions: 155 x 80 x 35 mm
• Weight (without power adapter): 0.22 kg
• Including external 9 V power supply

• To generate MIDI data based on the position of the pedal
• 1 x Midi-In
• 1 x pedal-In (6.3 jack)
• 1 x Midi Out
• Dimensions: 11.5 x 6.5 x 3.5 cm
• Weight: approx. 0.3 kg

• 1 MIDI input
• 4 MIDI outputs
• Active
• Is powered by the MIDI cable
• Compatible with 3.3 V and 5 V MIDI standard

• 2 Cables from 2.5 mm jack to 2.5 mm jack
• For transmission of all MIDI messages incl. MIDI clock and SysEx data
• Weight: 23 g

This interface converts MIDI information into 4 control voltages and one gate. It has an external plug-in power supply. It is important that the first control voltage and the gate are always set to MIDI note events, with the pitch bender being converted to the first CV. The remaining CVs can be used to control further parameters of an older synthesiser in the sequencer, e.g. filter modulations. The 3 control voltages can be controlled via MIDI controllers. The interface receives an adjustable MIDI channel, which means that looping the MIDI signal makes sense.

• Two jacks for CV1 / 2 and CV3 / 4
• Jack for Gate / Trigger
• Learning button with LED for setting the MIDI channel
• Optical display of the gate / trigger function via LED
• MIDI-in, MIDI-Thru connection
• Metal housing
• Dimensions: 95 x 75 x 35 mm
• Power connection: 7-12V / 100 mA

• Sends MIDI signals over CAT.5 network cables up to 500 metres
• Set consisting of transmitter, receiver and power supply
• 1x MIDI In / 1x MIDI Out
• Dimensions: 100 x 46 x 32 mm
• Weight: 110 g

• Lossless transmission of MIDI data of any kind to multiple recipients
• 1 x Midi Input
• 5 x midi outputs
• Contained power supply included
• DC IN 9V
• Robust aluminum housing
• Dimensions: 100 x 50 x 35 mm
• Weight: 600 g (with power supply)

• For loss-free transfer of MIDI data of any kind to multiple receivers
• 1x MIDI input and 25x MIDI Thru
• Handles all MIDI data including Clock, SysEx, MTC
• Dimensions: 300 x 54 35 mm
• Weight: 460 g
• Incl. 9 V switching power supply (for EU / UK / USA / Australia)

• 1 MIDI input
• 2 MIDI outputs
• Active
• Is powered by the MIDI cable
• Compatible with 3.3 V and 5 V MIDI standards

• MIDI channels selectable from 1 to 16
• 2 Switches for value reduction/increase
• 1 Function switch for menu
• 3-Digit LED display
• Transpose by octave or semitone at the touch of a button
• Sends MIDI program change events
• Input for expression pedal (not included)
• Class Compliant (no driver required)
• USB MIDI port allows connection to any Crumar Mojo, GSi Gemini or other USB MIDI device
• USB connection for power supply, no additional power supply required
• Connectors: USB-B, MIDI-Out, Pedal-In
• For use with Crumar Mojo (except Mojo Classic, because only via 5-pin MIDI cable)
• Dimensions (W x D x H): 570 x 440 x 150 mm
• Weight: 9 kg

• 1x DIN-6 MIDI cable on 2x 2.5 mm jack
• For transmission of all MIDI messages incl. MIDI clock and SysEx data
• Weight: 23 g

• 4 x MIDI Inputs
• 2 x MIDI Outputs
• Power supply (included)
• Robust aluminum housing
• Dimensions: 110 x 80 x 35 mm
• Weight: 700 g (with PSU)

• For Punchlight displays
• Compatible with Recording PlexSign, Recording Display, Studio Warning Lamp and Recording Strip
• Hold switch for manual switching
• Two-colour red/green LED as status indicator
• MIDI input and output
• Dimensions (W x H x D): 105 x 38 x 104 mm
• Includes external 12 V power supply

Note: Requires MIDI interface (not included)

• 1 x MIDI input and 12 x MIDI thru
• Processes all MIDI data incl. Clock, SysEx, MTC
• Dimensions (W x D x H): 162 x 54 x 35 mm
• Weight: 290 g
• Incl. 9 V switching power supply for EU/UK/USA/Australia

• Converts velocity data
• MIDI-powered

• Wireless MIDI system using Bluetooth 4/5
• Low latency (3 ms)
• Easy to set up thanks to automatic pairing
• For the transmission of all MIDI messages, including MIDI clock and SysEx data
• Powered via a MIDI Out DIN (3.3/5 V)
• Direct connection with Bluetooth MIDI devices (BT controllers, iOS-/MacOS devices with BT4 or later)
• 2x CME WIDI Master are required for the bidirectional connection of MIDI devices
• 1 MIDI output (5-pin DIN)
• 1 MIDI input (5-pin DIN)
• Main device dimensions : 21 x 21 x 49 mm
• Sub device dimensions: 18 x 18 x 24 mm

• 8 MIDI inputs
• 2 MIDI outputs
• All input MIDI signals are merged into one signal
• Processes also SysEx and MIDI Timecode
• Power is supplied via the MIDI cable
• Design: 19"/1U