Expansion & Interface Cards

• Pro Tools HD Port: Up to 32 bi-directional channels at up to 192kHz
• Routing of Symphony I/O module inputs or Dante RX in blocks of 8 channels each to inputs in Pro Tools
• Routing of Pro Tools HD outputs to Dante-Tx and I/O module outputs
• Up to 32 bidirectional channels at 96kHz
• 16 bi-directional channels at 192kHz
• Apogee Network Control software
• Remote control of Symphony I/O settings including mic preamps (if present)
• Calibration and monitor control
• Seamless interaction with any other Dante-enabled device
• Compatible with macOS and Windows 10

• For DM2000, M7CL, PM5D
• 96 kHz / 24bit converter
• Euro block connection

Offering 8 channels of analog input plus 8 channels of analog output in a single-slot card, the MY8-ADDA96 has been thomann specifically designed for use with Yamahas DME24N or DME64N Digital Mixing Engines, but is also an excellent I/O expansion choice for Yamaha digital mixing consoles. In addition to full 96 kHz support, the MY8-ADDA96 features Euroblock connectors for optimum reliability and connection ease in a wide variety of thomann installations. Another advantage is low power consumption that allows up to four of these cards to be installed in one DME64N unit providing a total of 32 analog inputs and outputs without placing excessive power load on the system. And, of course, the MY8-ADDA96 employs high-performance A/D and thomann D/A converters that deliver superior sound for any application.

• 44.1 - 96 kHz
• D-Sub 25-pin connector
• With sample rate converter

• For DM2000, DM1000, 02R96 and 01V96 24 bit AD converters

• 128 Channels: 64 in / 64 out
• Uncompressed 48kHz / 24-bit audio data via Dante audio network

• Plug-in card for Avid MTRX base unit, article no. 422725, not included in the delivery
• Occupies one module slot in the base unit
• Adds two primary mini DigiLink ports to an MTRX interface to use with the HDX3 systems or as a hub for multiple Pro Tools systems
• Provides 64 DigiLink I/O channels
• Up to six boards can be installed in one MTRX base unit

Avid Pro Tools MTRX 8 Line Pristine DA Card; expansion card with 8 analogue line input channels for Avid MTRX base unit (item 422725, not included in delivery); output level adjustable from -60 to 24 dBu in 0,1 dB steps; THD+N (A): 10 kOhm; 8 AD converter 24 Bit / 384 kHz; DSD samplerates 2,8224 and 5,6448 Mhz (64 and 128 fs); input format 25-pin Sub-D connector; requires one module slot of the base unit

• With 2x RJ45
• 64 Channels in and out at 48 kHz or 96 kHz

• 32-Channel bi-directional USB 2.0 audio / MIDI interface for recording, playback and DAW control
• HUI / Mackie Control emulation
• 32-Track live recording and playback on two SD / SDHC cards
• Recording time up to 3 hours (32 channels at 32 bit / 48 kHz) and more than 12 hours recording time at 8 tracks
• Live playback with markers from SD Card possible - controllable via PC, Androi, iOS and X-Touch devices
• Markers can be edited via X32
• Suitable for the Behringer X32 family

• An optional digital interface with 8 channels A/D conversion for each preamp output and two channels D/A conversion for the digital monitor return signal
• Word Clock In/Out
• A digital headroom selector switch for switching the DMON input and digital preamp outputs 1 to 8 from +18 dBu, +24 dBu or +26 dBu
• It can be used as a primary/core audio interface via the USB-B connection
• The primary and secondary Dante connectors allow the 1073 OPX to be connected to any Dante audio-over-IP network as a Dante-enabled preamplifier

• Madi optical and coax I/O
• Expandable to 64 I/O with MY-16-EX cards

• 16 channels of ADAT I / O via a single slot

The MY16AT Mini-YGDAI Digital I/O card can be used with Yamaha's 02R96 digital consoles to provide up to 16 channels of simultaneous ADAT-format optical input and output via a single expansion slot. All 16 channels can be used independently at sample rates up to 48 kHz, or the MY16-AT can be used for "doublechannel" connection to 24-bit/96-kHz recorders providing 8 channels of I/O at 88.2 or 96 kHz.

• Double-channel connection with 24-bit / 96 kHz recorders

Although the 02R96 handle 24-bit/96-kHz audio as standard, most of the currently available digital recorders can handle 24 bit/96-kHz audio only in double channel mode (using 2 tracks to make one). In this configuration the 02R96 use one channel for one track, but twice the number of I/O connections must be used. Thus, in double-channel mode a single 16-channel MY16-AT card will handle up to 8 channels of 24-bit/96-kHz audio. With the newest recorders that handle 96- kHz audio as standard (in double speed mode like the 02R96) you can make standard connections using the MY8-AE96 card.

• For monitoring uncoded, linear PCM audio streams from a SD/HD-SDI video signal
• 1 HD-SDI input BNC 75 Ohm
• 1 HD-SDI output BNC 75 Ohm
• Dimensions (W x H x D): 150 x 31 x 115 mm

• 32 Channels (48 kHz) bi-directional
• Full remote control possible

Avid Pro Tools MTRX 8 Mic / Line Pristine AD Card; expansion card with 8 remoteable analogue microphone / line input channels for Avid MTRX base unit (item 422725, not included in delivery); pre-amp gain adjustable from -18 to +70 dB in 0,1 dB steps; euqivalent input noise microphone preamp: 10 kOhm; 8 AD converter 24 Bit / 384 kHz; DSD samplerates 2,8224 and 5,6448 Mhz (64 and 128 fs); input format 25-pin Sub-D connector; requires one module slot of the base unit

• An optional digital interface with 8 channels A/D conversion for each preamp output and two channels D/A conversion for the digital monitor return signal
• Word Clock In/Out
• A digital headroom selector switch for switching the DMON input and digital preamp outputs 1 to 8 from +18 dBu, +24 dBu or +26 dBu
• It can be used as a primary/core audio interface via the USB-B connection
• The primary and secondary Dante connectors allow the 1073 OPX to be connected to any Dante audio-over-IP network as a Dante-enabled preamplifier

Mini-YGDAI cards make it easy to add I/O in a wide variety of audio and network formats to Yamaha digital mixing consoles, processors, and power amps that are equipped with compatible card slots. Mini-YGDAI cards can give your system the most up-to-date capabilities for any application.

• For Yamaha DM2000
• 44.1 - 96 kHz
• D-Sub 25pin connector