Pickups for Folklore Instruments

• Fully balanced active dynamic contact microphone
• Output impedance: 4.7 kOhm @ 1 kHz
• Frequency range: 20 - 20000 Hz
• Dynamic: 139 dB, 145 dB typical
• XLR connector balanced
• Cable length: 1.40 m
• Made in Switzerland

• For harp and piano

• For guitars with nylon strings
• Possible E-e string distance: 56 - 60 mm
• Height: 1.6 mm
• Weight: 2.3 mm
• Cable length approx. 30 cm

• Universally usable active dynamic contact microphone for violins
• Is mounted with a special adhesive putty to the instrument
• Requires phantom power (min. 22 V DC)
• Output impedance: 4.7 kOhm @ 1 KHz
• Frequency range: 20 - 20,000 Hz
• Dynamic range: 139 dB (typically 145 dB)
• Sensitivity on the instrument: ca. -30 dB
• Theoretical sensitivity: -62 dB / @ 1um ampl.
• Mechanical decoupling: Butterworth 2nd order, Q=6
• Temperature range: -20° C up to +70° C
• Made in Switzerland

• Active dynamic contact microphone
• Is mounted with a special adhesive putty to the instrument
• Requires phantom power (min. 22 V DC)
• Output impedance: 4.7 kOhm @ 1 KHz
• Frequency range: 20 - 20,000 Hz
• Dynamic range: 139 dB (typically 145 dB)
• Sensitivity on the instrument: ca. -30 dB
• Theoretical sensitivity: -62 dB / @ 1um ampl.
• Mechanical decoupling: Butterworth 2nd order, Q=6
• Temperature range: -20° C up to +70° C
• Made in Switzerland

• Suitable for zither
• With preamplifier
• Easy installation - without drilling and / or milling on the instrument
• 3V cell battery
• Low energy consumption

• With SMD technology
• Powered by a 3V mini battery
• Extra thin model with low weight and very small format
• With neodymium magnets and magnetic steel magnets for a tuned magnetic field
• Powerful signal and excellent amplification
• Enveloped model
• Lightweight
• Dimensions: 60 x 21.5 x 8 mm

• With built-in piezo for powerful bass
• Wooden housing made of ash
• 6.3 mm jack output
• Dimensions: 15 x 15 x 3.30 cm

• Active electronics
• No drilling on the instrument is required
• Including active artist preamp and mounting material

• Piezoceramic pickup system with two pickups
• Ideal for guitar, saz, oud, bouzouki, balalaika, cello, dulcimer, bongos and many more

• Suitable for Appalachian Dulcimer (all sizes)
• To be mounted to the soundboard of the dulcimer with a special residue-free adhesive
• The jack is mounted to the End Block with 3M VHB tape

• Double sensor pickup
• For installing onto the interior of the instrument
• Specially developed for ukuleles

• For steel-string acoustic guitars
• Install inside the instrument
• Gold-coloured strap button with jack output

• For instruments with normal 2-foot bridge
• With 6.3 mm jack socket

• Consists of the Pure pickup, the FanTaStik Western pickup and the PowerMix Pure XT Preamp with 2 x separately adjustable channels
• Bass, midrange and treble controls for both channels
• Internal gain controls for both channels that allow up to 10-times the amplification of the input signals
• Volume controls and 6.3mm jack inputs for both channels
• 6.3 x mm Output jack
• Controls located inside the preamp for gain, bass, midrange and treble, with a signal range of +/- 20 dB
• Internal controls can be adjusted with a screwdriver
• Drilling required on the instrument!

• Mechanical screw adjustment for each string
• Dimensions: 71 x 26 x 10 mm

• Extra thin Baglama pickup in miniature
• With full and clear sound
• Excellent balance between the individual strings through a separate magnetic field on each string
• Dimensions: 37 x 17.5 x 6 mm

• Double coil magnetic soundhole pickup
• For steel string acoustic guitar
• With switch for phase inversion and switch for tone (bright "gloss" or substantial "steam")
• Works in all presets completely hum-free

Consists of:

• Pure mini pickup

Trinity Microphone

• Integrated 5" gooseneck
• Frequency range from 20 - 20,000 Hz

Trinity Pro Preamp:

• 2-Channel external preamp
• Gain / volume / bass / middle / treble on both channels
• Phase switch for the microphone channel
• Incl. Stereo output jack and stereo cable