Bells and Barrels

Therefore the aim was to develop a clarinet barrel leading to new sound dimensions and at the same time eliminating the above mentioned problems. The new development protected by trade mark rights offers an previously unknown sound brilliance. The zoom barrel represents the perfect symbiosis of improved sound characteristics and reproducible intonation. The fact that the new z-barrel has a continuous bore in every position of length and additionally is not interrupted on the outside leads to an improvement which seemed unimaginable so far.

Tuning becomes precisely adjustable and visible by an adjusting collar supplied with a scale. Rotating the adjusting collar expands the barrel without modifying the axial alignment. The clarinet barrel is produced with modern CNC turning technology and extended by the adjusting collar for intonation adaption without the mouth piece or the clarinet twisting towards each other.

• For Buffet RC series
• Boehm system
• Size: approx. 64 mm
• The lower part of the barrel consists of grenadilla (dalbergia melanoxylon)

• Suitable for Prestige clarinet
• This barrel has a modified cone and tapers downwards, which gives the clarinet a little more resistance and the tone is kept better
• Made of grenadilla wood (Dalbergia melanoxylon)
• With silver-plated rings
• Height: 64 mm
• Made in Paris

• Suitable for model D12 - D41, also D51
• "Old model"
• Made of grenadilla wood (Dalbergia melanoxylon)
• Black stained
• Made in Germany

• Size: 53.0 mm
• Made of seasoned grenadilla wood (Dalbergia melanoxylon)

This barrel has an invert tapered bore. This gives the clarinet a pure and focussed sound that does not get thinner in the high registers

• 64 mm
• Made of grenadilla wood (Dalbergia melanoxylon)
• With silver-plated rings
• Made by Mr. Chadash in USA

• Suitable for A and Bb clarinets with a french bore from Buffet, Selmer, Backun and Yamaha (except CSG)
• Carbon fibre retains all positive characteristics of high-quality woods, including a warm and beautiful sound
• A perfect and stable pitch
• Improved intonation and staccato
• Length: 64 mm
• Made in Italy

• RC Prestige
• For A-clarinet
• Tuning: 442 Hz
• Size: 64 mm
• Made of grenadilla wood (Dalbergia melanoxylon)
• With silver-plated rings

This barrel has an invert tapered bore. This gives the clarinet a pure and focussed sound that does not get thinner in the high registers.

• 65 mm
• Made of grenadilla wood (Dalbergia melanoxylon)
• With silver-plated rings
• Made by Mr. Chadash in USA

• Length: 66 mm
• Made of grenadilla wood (Dalbergia melanoxylon)
• Gold-plated rings

• For Bb clarinet
• Suitable for YCL-657-24
• Made of natural grenadilla wood (Dalbergia melanoxylon)

This barrel has an invert tapered bore. This gives the clarinet a pure and focussed sound that does not get thinner in the high registers.

• 66 mm
• Made of grenadilla wood (Dalbergia melanoxylon)
• With silver-plated rings
• Made by Mr. Chadash in USA

• Length: 57.5 mm
• From long-aged grenadilla (Dalbergia melanoxylon)

• Suitable for Prestige clarinet
• Size: 64 mm
• Barrel with a modified taper - it gets narrower towards the bottom, which gives the clarinet a bit more resistance and holds the tone better
• Made of grenadilla wood (Dalbergia melanoxylon)
• With silver-plated rings
• Made in Paris

• Suitable for Prestige clarinet
• Size: 68 mm
• Barrel with a modified taper - it gets narrower towards the bottom, which gives the clarinet a bit more resistance and holds the tone better
• Made of grenadilla wood (Dalbergia melanoxylon)
• With silver-plated rings
• Made in Paris

When standard clarinet barrels are pulled out for intonation correction, only attenuated vibrations are transferred to the clarinet, as the connection to the tenon cork is reduced, while a hollow space is created on the inside and a gap on the outside.

For this reason, it was our aim to develop a clarinet barrel leading to new sound dimensions and at the same time eliminating the above mentioned problems.

This new development, protected by trademark rights, offers an unprecedented brilliance in sound. The zoom barrel represents the perfect symbiosis of improved sound characteristics and reproducible intoning. No matter how the length is adjusted, it has a continuous bore and additionally is not affected on the outside. Tuning becomes precise and clearly visible via an adjusting collar complete with a scale. Rotating the adjusting collar lets the barrel expand without affecting the axial alignment.

The clarinet barrel is produced with modern CNC turning technology. It can be adjusted for intonation with the adjustment collar without the mouth piece or the clarinet turning to each other.

• The lower part of the barrel is made of grenadilla (Dalbergia melanoxylon)
• 55 mm
• For German clarinets

• Suitable for Prestige clarinet
• This bulb has a modified cone and tapers downwards, which gives the clarinet a little more resistance and the tone is kept better
• Made of grenadilla wood (Dalbergia melanoxylon)
• With silver-plated rings
• Height: 63 mm
• Made in Paris

• Optimised flow and sound properties
• Made of grenadilla wood (Dalbergia melanoxylon)
• Without bell ring
• 30% Lighter than a traditional buffet Crampon bell
• Black nickel-plated ring

• Suitable for Prestige clarinet
• Size: 62 mm
• Barrel with a modified taper - it gets narrower towards the bottom, which gives the clarinet a bit more resistance and holds the tone better
• Made of grenadilla wood (Dalbergia melanoxylon)
• With silver-plated rings
• Made in Paris

• Length: 54.5 mm
• From long-aged grenadilla (Dalbergia melanoxylon)

Therefore the aim was to develop a clarinet barrel leading to new sound dimensions and at the same time eliminating the above mentioned problems. The new development protected by trade mark rights offers an previously unknown sound brilliance. The zoom barrel represents the perfect symbiosis of improved sound characteristics and reproducible intonation. The fact that the new z-barrel has a continuous bore in every position of length and additionally is not interrupted on the outside leads to an improvement which seemed unimaginable so far.

Tuning becomes precisely adjustable and visible by an adjusting collar supplied with a scale. Rotating the adjusting collar expands the barrel without modifying the axial alignment. The clarinet barrel is produced with modern CNC turning technology and extended by the adjusting collar for intonation adaption without the mouth piece or the clarinet twisting towards each other.

• For Buffet RC series
• Boehm system
• Size: approx. 63 mm
• The lower part of the barrel consists of grenadilla (dalbergia melanoxylon)