LD Systems

• Consists of 9.5" stereo transmitter MEI 1000 T, 1x pocket receiver MEI 1000 BPR and 1 x headphones
• Up to 5 systems parallel
• Mono / stereo
• Integrated limiter up +12 dB
• 2 x Combo inputs
• Headphone output
• Operates with 2 AA batteries
• Removable BNC antenna
• Frequency band: B5 (584-607 MHz)
• Includes rack mount, batteries, antenna cable for front mounting and plastic carrying case

• For 1x LDMEI1000 or 1x LDMEI1000X

• Slave box for the mix 10 A G3
• Equipped with: 10" Woofer+ 1" tweeter
• Frequency range: 65 - 20,000 Hz
• Rated power: 200 Watts RMS, 400 Watts peak
• Sound pressure level: 121 dB SPL
• Impedance: 4 Ohms
• Dispersion pattern: 80° x 70°
• Speaker twist input
• Dimensions: 315 x 489 x 307 mm
• Weight: 10.8 kg

• 80 W RMS
• 8" / 1" Coaxial
• Coverage pattern: 75° x 75°
• 90 - 20,000 Hz
• 97 dB (116 dB SPL max)
• Integrated protected circuit design
• XLR/Jack combo in - XLR out
• 15 mm Plywood housing
• Dimensions: 320 x 250 x 361 mm
• Weight: 10.6 kg

• For LD CURV 500 TS subwoofer
• Padded
• Made of durable 1680D nylon
• 8 mm thick padding
• Closable handle cutouts
• Large outer pocket for accessories
• Dimensions (W x H x D): 600 x 370 x 450 mm
• Weight: 1.1 kg
• Colour: Black

Bundle offer comprising

• UHF Wireless In-Ear System
• Consists of 9.5" stereo transmitter MEI 100 T, body pack receiver MEI 100 G2 BPR, and earphones
• Up to 8 systems simultaneously
• Frequency range: 823 - 832 MHz and 863 - 865 MHz
• Integrated limiter up to +12 dB
• 2 jacks/XLR combination inputs
• Headphone output
• Operation with 2 AA batteries
• Detachable BNC antenna
• Includes rack mount, batteries, antenna cable for front mounting, and plastic case

• Dynamic In-Ear Earphones
• In-ear
• Impedance: 16 Ohm
• SPL: 108 dB max
• Frequency response: 25 - 17.000 Hz
• Cable length: 127 cm
• Gold plated stereo jack 3.5 mm
• Colour: Grey
• Various ear pieces and storage bag included

Note: According to current EU regulations on volume control, this product is intended for professional use only and must not be used in the consumer sector

• Handheld transmitter with dynamic capsule
• Frequency bands: 823-832 MHz and 863-865 MHz
• 12 Selectable channels
• Up to 6 systems can be used simultaneously
• Transmission power: 10 mW
• ASC infrared synchronisation between transmitter and receiver
• Squelch with pilot tone
• Running time of the transmitter: 10 hours with 2x AA batteries
• Receiver is installed into the housing
• Stable metal housing
• Corresponding rack mount kits: Article Nr 452686 and Article Nr 407645 (both are not included and must be ordered separately)

• Casterboard with lashing belt
• 1 Case for subwoofer
• 2 Cases for satellites
• Colour: Black

• Condenser exchange capsule
• Polar pattern: Cardioid
• 9.5" 1U True Diversity Receiver
• Frequency band: 1785 - 1800 MHz
• Frequency response: 60 to 16,000 Hz
• 96 Channels in 8 groups a 12 channels
• Switchable transmission power: 2, 10, 30 mW
• Frequency scan in the receiver
• Automatic frequency scan with infrared transmission of the setting from the receiver to the transmitter
• Pilot tone
• Bright OLED display
• XLR and jack output
• BNC antenna connections
• Transmitter operation with 2 AA batteries or rechargeable batteries
• Receiver operation with 12-18 V DC power supply
• Includes 2 x AA batteries, antennas, case and power supply

• Frequency bands: 823-832 MHz and 863-865 MHz
• Frequency range: 50 - 16,000 Hz
• 12 Selectable channels
• Up to 6 systems can be used simultaneously
• Transmission power: 10 mW
• Receiver has a runtime of 10 h with 2x AA batteries
• Receiver in a sturdy metal housing
• Stereo- or mono mode
• Unlimited number of bodypacks can be set to the same transmission frequency
• Channel and RF reception are displayed on bodypack
• 2x Combo jacks serve as balanced XLR as well as unbalanced 6.35 mm jack inputs
• Mini jack socket on the receiver
• Weight (bodypack): 85 g
• Includes rack mounting kits

Earphones:

• Frequency range: 30 - 20,000 Hz
• Impedance: 16 Ohm
• Cable: 1.5 m
• Weight: 88 g

• For monitor and PA sound systems
• Discreet appearance for unobtrusive use
• DSP based multiband limiter
• Set consists of: 1x active subwoofer Curv500S, 1x active slave subwoofer Curv500SE, 2x Smartlink adapter and 8x array satellites
• Sound pressure level limit: 134 dB SPL max
• Power: 920 Watt RMS
• Frequency range: 47 - 20.000 Hz
• Beam angle: 110° horizontal x 10° vertical
• 10" Bass reflex subwoofer
• Integrated Class D power amplifier
• 3 Handles
• M20 Threaded flange
• Integrated 4 channel mixer with 4x XLR / jack combination input
• 2x XLR male out
• Integrated digital effect with 16 DFX presets
• Control for channel 1 and 2
• Adjustable low and high for channel 1 and 2
• Channel 3 with integrated Bluetooth receiver and 3.5 mm stereo jack input
• Adjustable sub level and main level
• Subwoofer dimensions: 325 x 383 x 491 mm
• Array satellite dimensions: 122 x 122 x 122 mm
• Smartlink adapter dimensions: 122 x 57 x 122 mm
• Subwoofer weight: 16.5 kg
• Array satellite weight: 1.7 kg
• Smartlink adapter weight: 0.6 kg
• Includes 2x speaker twist cable 2.2 m, 2x mains cable, 5-pin XLR system cable and 2x spacer rod
• Matching trolley: Article number 373612 (not included)
• Matching bag: Article number 373619 (not included)

• Can be used vertically and horizontally thanks to coaxial construction with rotating BEM-optimised CD horn
• DynX DSP with 4 presets, 3-band EQ and delay
• Equipped with: 12" LF and 1" HF driver
• Class D amplifier
• Power: 300 Watts RMS / 1200 W peak
• Maximum SPL: 126 dB
• Frequency range: 50 - 20000 Hz
• Dispersion pattern: 90° x 50°
• With rotating horn
• 2x XLR/jack combo Mic/Line inputs
• AUX input via 3.5 mm stereo mini jack
• XLR mono mix output
• Monitor angle: 55°
• 2x 36 mm pole mount with fixed inclination angles (0° / 5°)
• 6 x M10 rigging points
• 4 Handles
• Power consumption: 150 W
• Dimensions (W x H x D): 375 x 635 x 396 mm
• Weight: 19.95 kg
• Suitable cover: Article no. 481069 (not included)

Bundle offer comprising

• PA Bundle
• 2x Class A/B power amplifiers
• Protective circuits: Short circuit, Limiter, Overload
• 2x XLR + 2x RCA inputs
• Control unit: Power, Sub Level, Subwoofer Phase Reverse, Volume
• Ferrite tweeters and woofer
• 15 mm MDF housing with black structured paint finish
• M20 threaded flange
• Maximum level: 119 - 130 dB
• Suitable cover: Article no. 316254 (not included)

1 Subwoofer

• Equipped with: 12" Speaker
• Power: 300 W
• Frequency range: 40 - 150 Hz
• Dimensions: 450 x 515 x 520 mm
• Weight: 31.5 kg

2 Satellites

• Equipped with: 6.5" Speaker / 1" Tweeter
• Dispersion angle: 90° x 40°
• Power: 120 W
• Frequency range: 120 - 19000 Hz
• Dimensions: 250 x 400 x 250 mm
• Weight: 8.5 kg each

• Professional Speaker Stand Set
• Material: Aluminium
• At maximum height can hold up to 30 kg centric load
• Height: 1.25 m - approx. 2.00 m
• Pole diameter: 35mm
• Weight (per piece): 2.16 kg
• Total weight including carry bag (without packaging): 4.73 kg
• Colour: Black
• Set of two stands, includes carry bag

• Professional Speaker Cable
• Length: 10 m
• Speaker Twist - Speaker Twist
• Neutrik Speaker Twist connectors
• Cross-section: 2 x 1.5 mm²
• Colour: Grey

• For LD Systems U506 IEM
• Frequency range: 655-679 MHz
• 12 Channels
• On/Off switch
• Channel down
• Channel up
• Volume control
• Headphone output
• Powered by 2 x 1.5 V AA

• 150 W RMS
• 10" / 1" Coaxial
• Coverage pattern: 75° x 75°
• 90 - 20,000 Hz
• 99 dB (121 dB SPL max)
• Integrated protected circuit design
• XLR/Jack combo in - XLR out
• 15 mm Plywood housing
• Dimensions: 380 x 335 x 398 mm
• Weight: 15.3 kg
• Suitable optional cover: Art.490238 (not included)

• Compact Plug and Play column system for monitoring and PA sound reinforcement
• Discreet appearance for inconspicuous applications
• LD Systems DynX Technology
• With limiter, equalizer, compressor and crossovers functions
• Frequency range: 50 - 20,000 Hz
• Maximum level: 124 dB
• Consisting of 1 x 3 x 6.5" bass reflex subwoofer and satellite speakers 1x 8 x 3" / HF: 1" horn tweeter
• Integrated Class D digital amplifier with 500W RMS power, 1000 W peak
• Dimensions of the subwoofer (W x H x D): 285 x 650 x 373 mm
• Dimensions of the satellite (W x H x D): 96 x 620/730 x 104 mm
• Weight of the subwoofer: 16.9 kg
• Weight of the satellite: 5.5/2.5 kg
• Subwoofer housing made of birch plywood
• Head housing made of aluminium with multipin connectors for simple installation without speaker stands and speaker cables

Controller in subwoofer:

• XLR / jack combo microphone inputs
• Line input LR XLR/jack combo and RCA input
• Instrument Hi-Z jack input
• MP3 / Bluetooth input with 3.5 mm stereo jack input
• XLR System out
• Adjustable sub and main level at the top
• Protection circuits: DC protection, short circuit, multiband limiter, overheating
• Mono / stereo switchable

• True Diversity
• 96 Channels in 8 groups of 12 channels each
• Audio frequency range: 60 - 16,000 Hz
• Switchable transmission power: 2 mW, 10 mW, 30 mW
• Frequency scan in the receiver
• Automatic frequency scan with infrared transmission of the setting from the receiver to the transmitter
• Pilot tone
• Bright OLED display
• Transmitter operation with 2 AA batteries or rechargeable batteries
• Frequency band: 584 - 608 MHz
• XLR and jack output
• Operation with 12 - 18 V DC power supply
• 2 Detachable BNC antennas
• Incl. 2 AA batteries, antennas, case and power supply

• Suitable for Stinger Sub 18" G3
• 8 mm Padding
• Dimensions (W x H x D): 576 x 470 x 625 mm
• Weight: 1.5 kg
• Colour: Black

• Passive 15" + 1" monitor/full range loudspeaker
• Power rating: 500 W RMS / 1000 W peak
• Max SPL: 127 dB
• Frequency range: 58 - 20,000 Hz
• Impedance: 8 Ohm
• BMS tweeter
• Dispersion angle (H x V): 90° x 50°
• Terminal with 1x Speaker Twist input and 1x Speaker Twist output
• 15 mm Plywood housing
• 36 mm Dual tilt tripod flange
• 3 flying points
• Dimensions: 480 x 737 x 455 mm
• Weight: 26.4 kg

• For the Maui 44 G2 column speaker
• 8 mm Padding
• For the Maui 44 G2 subwoofer
• 8 mm Padding
• Dimensions (H x W x D): 160 x 920 x 240 mm
• Weight: 1.2 kg
• Colour: Black / grey