K&K

• Passive 4-head pickup for nylon stringed classical guitars
• Mounting takes place in the interior of the instrument

• With integrated 5" gooseneck
• Frequency range: 20 - 20,000 Hz

The Trinity Solo System is an alternative to (or complement for) the Trinity Pro System or the Quantum Blender and supplies power to the microphone. The Trinity Solo can not be operated as a separate system, and for this purpose, K&K recommends the use of their own preamplifiers.

Note: Preamp and pickup are not included.

• Two pickups
• For double basses, cellos, bongos, congas, hand drums, guitars, harps, saz instruments, sitars
• Mount the pickup on the top by with adhesive film
• Mount the jack (6.3 mm) at any point with self-adhesive clamp
• Frequency range: 20 Hz - 15 kHz

• Passive 3-way pickup for steel string acoustic guitars
• With volume control
• Mounts inside the instrument

• For internal pick-up in the instrument
• Specially designed for fan-braced ukuleles
• For mounting the 6.3 mm (1/4'') jack socket a hole is necessary

• For double bass
• Original rockabilly sound

• Mounting system is completely internal
• The two pickups can be mounted on the inside of the mandolin top (in the intrument!) with double-sided adhesive tape
• Both the transducer and the jack connector must be installed inside the instrument
• Installation should be carried out by an experienced instrument technician!
• Cable length approx. 18 cm
• Transducer size: 16.5 x 23 mm
• Input impedance: High ohmic
• 6.3 mm Mono jack connector
• Suitable for all mandolin types

• Specially designed for acoustic guitars, but also very well suited for many other acoustic instruments
• Excellently suited in combination with the Pure pickups
• Special broadband center filter
• +/- 20 db bass
• Center and height controls
• Internal gain trimmer
• Frequency response: 10 - 30.000 Hz
• Bass control starts at 100 Hz
• Midrange filter from 1.5 kHz
• Altimeter controls at 10 kHz
• Input impedance: 1 MOhm
• Output impedance 10 kOhm
• Battery life: approx. 180 hours

• For hand drums and other percussion instruments
• Particularly small size, therefore especially suitable for small instruments
• Linear frequency response
• High output level compared to the size
• Ideal for the "slap" in rockabilly bass range

The Dual Channel Pro Preamp is a two-channel, belt clip mixer that allows you to blend two pickups. It is compatible with both piezo and magnetic pickups. The Dual Channel Pro Preamp features extremely low-noise operation. It can process high input peaks without distortion and offers an incredible dynamic range.

• Frequency range: 10 - 30,000 Hz
• Input Impedance: 1 Mega Ohm
• Output Impedance: 3 K Ohm
• Average current: 3.5 mA
• Battery hours: about 60 h
• Dimensions: 110 x 85 x 38 mm / 4+3/8" x 3+3/8 x 1+ 1/2"
• Input and Output jacks: 1/4" instrument jacks
• Bass, mid, treble EQ, gain and volume controls per channel

• Can be easily mounted on all Maccaferri guitars
• The pickup consists of 2 sensors - 1x top pickup, 1x bridge pickup
• The top pickup is mounted with double-sided adhesive tape, the bridge pickup held in place by pressure
• The 6.3 mm jack is also attached by double-sided adhesive tape
• The tape is included and does not damage the paint of the instrument

• Excellent for finger style playing
• Mount the 4 transducers by using the included tape
• The input jack (6,3mm) is to be mounted on the strings between bridge and tailpiece

• To take the slap sound from the double bass in Rockabilly
• The pickup is fixed under the fingerboard with double-sided adhesive tape

• For steel stringed acoustic guitars
• Mounting takes place in the interior of the instrument

• The two pickups can be mounted on the inside of the mandolin top (inside the intrument!) with double-sided adhesive tape
• Precise installation instructions and special tools are included
• Cable length approx. 27 cm
• Transducer size: 16.5 x 23 mm
• Input impedance: High ohmic
• 6.3 mm Mono jack connector
• Mounting is done on the edge of the frame with chinrest screws (only for F and A style mandolins)

• Produce an extra strong transmission of the lows and very well articulated mids
• Dimensions of the 3 pickups (H x L): 22 x 61 mm (0.86" x 2.4")

• Pickup to be mounted in the bridge
• The input jack (6,3mm) is to be mounted on the strings between bridge and tailpiece