Behringer

• Analogue signal path
• 2 VCOs with CEM3340 chips
• Continuous transition between 5 waveforms
• Paraphony mode for two-part sounds
• Multimode VCF with resonance
• 2 Analogue ADSR envelopes for VCF and VCA
• Flexible LFO with 5 waveforms and MIDI sync
• Analog BBD delay
• Noise generator
• Overdrive circuit
• 43 Control elements for direct access
• Jack matrix with 32 inputs, 24 outputs for enhanced sound and connectivity with other modular synthesisers & sequencers
• Can be used as a complete Eurorack synthesiser voice (width: 80 HP)
• MIDI In / Thru and USB-MIDI
• 6.3 mm audio input for sound processing from external sources
• 6.3 mm headphone output
• 6.3 mm line output
• Dimensions: 94 x 424 x 136 mm
• Weight: 2.0 kg
• Power adapter included (12 V DC, 1000 mA)
• Suitable protective cover: Article no. 477466 (not included)
• Suitable cases: Art.#480286, Art.483005 (both not included)

• Eurorack Go housing
• Includes power supply unit and BP56, BP28 and BP12 plate blanks
• 96 HP free for expansion with other modules

Modules included:

• 914 Fixed Filter Bank
• 923 Filters
• 904A VC Low Pass Filter
• 904B VC High Pass Filter
• 2 x 902 VCA
• 2 x 911 Envelope Generator
• 921A Oscillator Driver
• 2 x 921B Oscillator
• 921 VC Oscillator
• CP3A-M Mixer
• CP35 Attenuators
• 961 Interface
• CM1A MIDI-CV Interface

The VP1 delivers authentic and classic three-dimensional phaser effects. Sound and effect speed can be adjusted by separate rate and tone control. A status LED for effect activation and battery check is included and a real "hard-wire" bypass ensures maximum signal integrity. The power supply is via a 9 V battery or a DC adapter (not included).

• Authentic and classic three-dimensional phaser effect
• From fast Rotary Speaker to impressive "Jet Plane" effects
• Separate rate and tone control for fine adjustment of sound and effect speed
• Status LED
• Real "hard-wire" bypass for maximum signal consistency
• Operation via 9 V battery or BEHRINGER PSU-SB DC adapter (not included)

• Studio Monitor Controller with VCA stereo tracking
• Two Midas mic preamps with +48V phantom powering
• AD/DA converter: 24bit / 44.1 - 192 kHz
• Frequency response: 20 to 20000 Hz
• SNR:
• THD+N:
• With master volume control, source selector and monitor switch
• Talkback function with built-in microphone Microphone and input for
• External microphone with footswitch and level control
• VCA control for level control and stereo tracking
• With mono, mute and dim function
• Zero-latency direct monitoring
• Dual LED display
• Two headphone amplifiers with separate volume controls and source selector switch
• Three independent monitor outputs for connecting two additional monitor pairs
• Aux input for connecting external sources
• 2 Mic/line combo inputs: XLR/jack
• 4 Line inputs: 6.3 mm jack (balanced or unbalanced)
• 1 Stereo input: 3.5 mm jack
• 1 Talkback input: XLR
• 5 Stereo monitor outputs: 6.3 mm jack (balanced or unbalanced)
• 2 Headphone outputs: 6.3 mm jack
• USB class-compliant
• Power supply via mains adapter: 12V DC 2000 mA
• For Windows 10 and Mac OSX 10.14 or higher
• Dimensions (H x W x D): 80 x 328 x 163 mm
• Weight: 1.8 kg
• Includes power supply unit

• With master volume control, source and monitor selector switches
• With mono, mute and dim functions
• Frequency response: 20 - 20000 Hz (±0.5dB)
• 2 Line inputs A/B balanced or unbalanced: 6.3 mm jack
• 1 Stereo input: 3.5 mm jack
• 2 Line outputs A/B balanced or unbalanced: 6.3 mm jack plug
• Dimensions (H x W x D): 75 x 137 x 154 mm
• Weight: 0.65 kg

• Speaker configuration: 5.5" woofer and 1/2" tweeter
• Class-D amplifier
• Maximum power: 100 W
• Mic / Line input: XLR, balanced
• Aux input: 3.5 mm mini jack
• Link output: XLR balanced
• Built-in switching power supply 100-240 V, ~50/60 Hz (switchable)
• Flexible wall bracket included
• Dimensions (H x W x D): 320 x 196 x 195 mm
• Weight: 4.0 kg
• Colour: Black

• 16 Channels
• 4 Microphone inputs with 48 V phantom power, 75 Hz low cut, compressor, 3-band EQ with parametric mids and insert
• 4 Stereo inputs
• 3-Band EQ, peak LED and mute switch in all channels
• Internal 24-bit multi-effects device with 16 presets
• 2 Subgroups with separate output
• 2 AUX paths (1 pre/post switchable, 1 post)
• 60 mm fader
• 2-Track input and output
• XLR main out
• Built-in USB sound card
• Internal power supply
• Dimensions (H x W x D): 90 x 320 x 340 mm
• Weight 3.45 kg
• 19" Rack kit included
• Suitable bag: Article no. 481195 (not included)

Bundle offer comprising

• Power Mixer
• 16 Channel (8 Mono, 4 Stereo)
• Class-D Power amp technology 2x 800W/4 ohm (1600W bridged)
• 24-Bit multieffects processor
• FBQ Feedback Detection
• Ultra-kompact dimensions
• 8 Mic-preamps with 48V phantom power
• 3-Band EQ with LowCut filter and Clip LED per mono channel
• 2 AUX paths 7-band stereo EQ for master and monitor
• 3D Stereo surround effects
• Adjustable AUX input
• Stereo preamp outputs
• Internal power supply
• Dimensions (H x W x D): 122 x 476 x 460 mm
• Weight: 10.40 kg

• Passive Full-Range Speaker
• Equipped with: 15" Speaker, horn with 44 mm titanium driver
• Power rating: 300 W RMS
• Impedance: 8 Ohm
• Sensitivity (1m/1W): 96 dB
• Max. SPL (1m): 121 dB
• 50-100° x 55°
• Frequency range: 35 to 20,000 Hz (-10 dB)
• SPK connector socket in/out
• Stand flange mount
• Trapezium-shaped plastic housing (PP)
• Colour: Black
• Includes monitor feet (Art.168374) for use of speaker as monitor
• Dimensions (H x W x D): 71.5 x 49.5 x 45 cm
• Weight: 25.5 kg
• Optional cover: Art.167392

• Professional Speaker Cable
• Length: 10 m
• Speaker Twist - Speaker Twist
• Neutrik Speaker Twist connectors
• Cross-section: 2 x 1.5 mm²
• Colour: Grey

• With remote control ULM300M and receiver ULM300RS
• License-free operation in the 2.4 GHz band
• Maximum range: 60 m
• Hand-held transmitter has buttons for volume and mute function
• Receiver outputs: XLR Balanced and 6.3 mm jack unbalanced
• Latency: 14.3 ms
• Microphone dimensions: 53 x 53 x 260 mm
• Receiver dimensions: 150 x 119 x 41 mm
• Microphone weight: 0.3 kg
• Receiver weight: 0.24 kg

Note: Two AA batteries or rechargeable batteries are required to operate the remote control (not included). We recommend the use of rechargeable batteries, e.g. Article Nr. 420822.

Bundle offer comprising

• 18-Channel Digital Mixer
• Remote controlled via built-in router with Wi-Fi, Ethernet and multi-channel USB audio interface
• 16 Mic/Line XLR/Combo jack inputs
• Inputs: 2 x Line - 6.3 mm jack
• Outputs: Main XLR
• 6 AUX / Monitor sends
• 4 Integrated effects processors
• 100 Band Analyser
• Stereo headphone output
• Ultranet monitor connection
• MIDI in-/output
• iOS, Android and other software apps available free of charge
• 3 U
• Installation depth: 114 mm
• Dimensions with rack ears and protection bumpers (W x H x D): 333 x 140 x 150 mm
• Dimensions without rack ears and protection bumpers (B x H x T): 311 x 132 x 150 mm
• Weight: 3.2 kg
• Includes a rackmount chassis
• Suitable cases: Article Nr 465628 and Article Nr 464046 (both are not included)
• Suitable gig bag: Article Nr 379654 (not included)

• Tutorial DVD
• Comprehensive video training for the Behringer X Air series (ESD)
• German interactive video tutorial for PC, Mac and Tablet
• 8 Hours total running time
• Overview and basics
• Possible connections and connection options
• Use of the X Air edit software
• Detailed look at the channel strips
• Use of the scribble strip
• Input section and levels of different signal sources
• Gate, EQ and compressor in practical use
• Functions in the main output section
• Mute and DCA groups
• Create monitor mixes with the bus sends
• Combine channels into a sub-group
• Using the internal effects
• Internal effects as insert FX in the channels
• Integrate external effects units
• Use presets and snapshots
• Saving and loading channel strip settings
• Management of snapshots
• Advanced options for loading snapshots
• Save and load effect settings
• Functions of the utility menu
• The In/Out menu and signal flow
• Extended options via the USB connection
• Routing between X Air mixer and computer
• Practical examples for different applications
• Combination with Waves Multirack
• The Auto-Mix function in action
• Control via iPad or Android tablet
• Includes more than 50 presets for EQ, compressor etc.
• System requirements: Win7 or higher, Mac OSX 10.6 or higher, 1.6 GHz CPU, 0.5 GB RAM, 1920 x 1080 monitor, sound card

Behringer HA-40R; 2-channel electric guitar amplifier, 40 watts of power, 10" custom Bugera speaker, controls: gain, volume(overdrive section), treble, middle, bass, reverb, volume; switch: channel select; connectors: Input (6.3mm jack), Line In (3.5mm jack), Headphone(3.5mm jack) Line Out (3.5mm jack), Foot Switch (6.3mm jack trs), external speaker 8 Ohms (6.3 mm jack); Dimensions: 420 x 425 x 220mm; Weight: 10kg, foot switch not included!

• 1 Mic input with phantom power and peak LED
• 1 Stereo line input
• 2-Band EQ in both channels
• 2-Track in-/output
• Master fader
• 15 V phantom power
• USB interface
• Power supply via PC USB or power adapter (included)
• Dimensions: (H x W x D) 46 x 114 x 136 mm
• Weight: 0.38 kg
• Suitable bag: Article Nr. 481198 (not included)

• With built-in Bluetooth audio transmission
• 1000 Watt peak
• "Wireless ready" for the optional Behringer digital wireless system
• Two mic / line inputs
• 2-Band EQ
• Additional line output
• Stand mount flange
• Dimensions: 713 x 427 x 313 mm
• Weight: 17.7 kg
• Optional protective cover: Article no. 321143 (not included)

Bundle offer comprising

• 24-Channel Mixer
• 10 Microphone inputs with 48 V phantom power and 75 Hz low cut
• 3-Band EQ with parametric mids, compressor and insert in channels 1-8
• 4 Stereo inputs
• 4 AUX paths (2 pre/post switchable, 2 post)
• 4 Subgroups with separate output
• Internal 24-bit multi-effects unit with 16 presets
• 2-Track input and output
• XLR main out
• Peak LED and mute switch in each channel
• 60 mm fader
• Built-in USB sound card
• BNC desk lamp connector
• Built-in power supply unit
• Dimensions (W x D x H): 438 x 136 x 418 mm
• Weight: 5.9 kg
• 19" Rack kit included
• Suitable case: Article no. 251046 or 520325 (not included)
• Suitable bag: Article no. 481187 (not included)

• Case
• Suitable for Behringer XENYX 2442/USB
• 1 Handle
• Accessory compartment
• Foam padding
• Interior dimensions (W x D x H): 510 x 430 x 130 mm
• Height of lower part: 130 mm
• Height top part: 10 mm
• Outer dimensions (W x D x H): 530 x 620 x 200 mm
• Weight: 5.15 kg
• Colour: Black

• 16 Bit / 48 kHz
• 2 Inputs and 2 outputs
• 1 x combo plug XLR/6.3 mm jack and 1 x 6.3 mm jack
• Xenyx microphone preamp including 48V phantom power
• Guitar input
• Signal and clip display
• Direct monitoring
• 6.3 mm jack headphone output
• RCA output
• USB bus powered
• Compatible with Windows XP, Vista, 7-10, as well as Mac OS
• Includes USB cable