|
|
19 "Guitar Power Amplifier
- Lightweight Class-D technology with switch-mode power supply
- 2x 200 W @ 4 Ohm
- 2x 100 W @ 8 Ohm
- 2x 50 W @ 16 Ohm
- Bridged 400 W @ 8 Ohm and 200 W @ 16 Ohm
- Frequency range: 20 Hz - 20 kHz
- Input sensitivity: 335 mV
- Damping factor: > 80
- Signal- noise ratio: > 90 dB
- Total harmonic distortion (thd):
- Power consumption: 18 W (standby current)
- Dimensions (W x D x H): 482 x 250 x 44 mm
- Format: 19"/ 1 HE
- Weight: 3 kg
|
Price History: Harley Benton GPA-400
$169.00 |
|
|
Guitar Power Amp
- Suitable for amplifying effect pedals
- Small enough for pedalboards
- Power: 170 W at 4 Ohms
- 3-Band EQ
- 13 dB boost/cut in each frequency band
- Controls for volume, bass, mid and treble
- Power switch on the back
- 1/4" mono-jack input/output on the back
- Cold device plug on the back
- Power status LED
- Temperature status LED
- O.C. status LED
- Output impedance: 4-16 Ohms
- Input voltage: 220-240V AC
- Dimensions (L x W x H): 127 x 133 x 72 mm
- Weight: 910 g
- Made in USA
|
Price History: Seymour Duncan Power Stage 170
$419.00 |
|
|
Stereo tube power amp for electric guitar
- Specially developed for the Synergy system
- Developed by Steven Fryette
- Power: 2 x 50 W / 100 W mono
- Tube assembly: 2 x 12AX7 and 4 x 6L6
- Impedance: 4/8/16 ohms (stereo), 2/4/8 (mono)
- 2 Latch inputs
- 4 Jack outputs
- Each channel with its own volume control
- Global presence and depth control
- 2 Fan system
- Rack format
- Made in USA
|
Price History: Synergy SYN-5050
$1,179.00 |
|
|
Dual-Mode Reactance Amplifier
- Easy-to-use power attenuator for volume control of high-performance tube amplifiers without the disadvantages of a conventional attenuator
- Two remote-controlled, foot-switchable controls on the front for volume, presence and depth for maximum flexibility during live performances
- Powerful mono block with 100 W from 2 KT88 tubes for incomparable response and dynamic range
- Active safety bypass function deactivates the internal power amplifier and maintains the critical load of the amplifier if the loudspeaker output socket is accidentally unplugged
- Output power: 100 watts at 2/4, 8 and 16 ohms
- Tubes: 1 x 12AX7, 2 x KT88
- Power consumption (max.continuous): 200 W @ 2/4 Ohm, 150 W @ 8 Ohm, 200 W @ 16 Ohm
- Channel A slider: Volume, Presence & Depth
- Channel B slider: Volume, Presence & Depth
- Balanced line output with level control: XLR
- Unbalanced line output 6.3 mm jack
- FX Send & Return: 2x 6.3 mm jack
- Speaker output: 6.3 mm jack
- Remote foot switch socket: 6.3 mm stereo jack
- Dimensions (W x H x D): 355 x 91x 228 mm
- Weight: 7.3 kg
Switches: - Channel A / B
- Hi / Lo input level
- Treble Response (Flat / Brite / Edge)
- Low Frequency Response (Presence / Bass)
- Bypass (standby)
- Amplifier impedance: 2/4, 8 or 16 ohms
- FX level Hi / Lo
- Speaker impedance: 2/4, 8 or 16 ohms
- Ground lift
Connections: - Balanced line output with level control (XLR)
- Unbalanced line output 6.3 mm jack
- FX-Send & return (2 x 6.3 mm jack)
- Speaker output (6.3 mm jack)
- Remote footswitch (6.3 mm stereo jack)
- Dimensions (W x H x D): 355 x 91x 228 mm
- Weight: 7.3 kg
|
Price History: Fryette Power Station 100
$1,359.00 |
|
|
19" Stereo Power Amplifier
- Especially for electric guitar
- Output Power: 2 x 200 W @ 4 Ohm, 2x 100W bridged @ 8 Ohm: 1x 400W @ 8 Ohm
- Class D dynamic circuit
- Frequency range: 20 - 20,000 Hz
- Protection: soft start, short-circuit, DC, overheating, overvoltage
- Controls: on/ off, volume, high, low, mode (bridge/ parallel/ stereo), ground lift, limiter sensitivity
- Line input: 2x XLR and 2x 6.3 mm jack
- Speaker output: 2x speaker twist and 3x 6.3 mm jack
- Dimensions (W x H x D): 482 x 44 x 244 mm
|
Price History: Palmer Macht 402
$269.00 |
|
|
Compact Pedalboard Power Amplifier
- Power: 200 watts into 4 ohms
- Suitable for operation of guitar cabinets with 4-16 ohms
- Suitable for connection directly after effects units
- Cab Sim and EQ can be switched on and off for headphone output and balanced out
- 4-Band EQ (Bass +/- 10 dB at 87 Hz, Mid +/- 10 dB at 645 Hz, Treble +/- 8.5 dB at 4.4 kHz, Presence +/- 6.8 dB at 11.6 kHz)
- Controls for Level, Bass, Mid, Treble, Presence, Phones
- Cab Sim On/Off switch
- EQ On/Off switch
- Status LEDs for power supply
- Power Amp Clipping and Preamp Clipping
- Output impedance min. 4 Ohm
- Input voltage 100-240 V AC
- Dimensions (L x W x H): 157 x 127 x 63.5 mm
- Weight: 1.3 kg
Switches and connections on the rear panel: - Power switch
- 6.3 mm mono jack inputs/outputs
- 6.3 mm headphone output
- 3.5 mm jack aux input
- XLR balanced output
- Power socket
|
Price History: Seymour Duncan Power Stage 200
$529.00 |
|
|
Guitar Power Amp
- Suitable for connection directly to effect units
- Class A / B tube circuit
- Output power: 20 watts
- Suitable for operation of guitar cabinets with 8-16 ohms.
- 1 x 12AXz (ECC83) and 1x AT7 (ECC81) pre-amp tubes
- 2 x Matched EL84 power amp tubes
- 2 x Input gain settings
- Transparent warm sound
- Controls for master and presence
- Hi / Low toggle switch to select the input impedance (Hi = 1 MOhm / Low = 220 kOhm)
- Standby toggle switch
- Power toggle switch
- Front-side 6.3 mm mono jack input
- Rear 1 x 8 ohms / 2 x 16 ohm 1/4" Mono-jack speaker outputs
- Rear 1 x 16 Ohm 1/4" Mono Jack Speaker Output
- Rear IEC AC IEC socket
- Rear AC Voltage Switch for Selecting Input Voltage (100 ~ 120V / 220 ~ 240V)
- Status LED
- Dimensions (L x W x H): 335 x 203 x 91 mm
- Weight: 5.25 kg
- Includes rack mounting ears and carrying handle
Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.
|
Price History: Mooer Tube Engine
$322.00 |
|
|
Power Attenuator
- With built-in 50 Watt tube power amplifier with 6L6 tubes
- The Power Station can be used for three main applications: Power reduction of powerful amplifiers without the disadvantages of conventional power attenuators, an amplification for small amps, and as a high quality adjustable reactive load for silent recording.
- Stepless power reduction
- Effects loop-in
- Line in for preamps, laptops, MP3 players etc.
- Line out
- Amp input and speaker output 4/8/16 ohms separately switchable to match any amp or speaker
- Reduce or increase the power of small amps
- Effective tone control to equalise the sound in case of strong reduction
- Natural playing feel due to the Reactive Load, the dynamic playing feel of the amp is maintained
- Input Level Range switch well suited for use with vintage non-master volume tops
- XLR balanced out
- Silent Direct Recording via the unbalanced output
- Weight: 6.8 kg
- Dimensions (H x W x D): 91 x 355 x 228 mm
- Matching gig bag: Art.441103 (not included in delivery)
|
Price History: Fryette Power Station PS-2A
$1,049.00 |
|
|
Stereo tube amplifier for electric guitar
- All-tube amplifier with 2 x 50 W
- Patented transformer technology allows for a height of only one rack height unit and yet high reliability and quiet operation
- The "Linear" mode delivers a full-range signal with flat response, while the "Enhanced" mode brings the colour and life to the sound that you would expect from a Fryette amplifier
- Power: 2 x 50 watts
- Preamp tubes: 2 x 12AX7
- Power tubes: 4 x 6L6GC
- Control: Volume
- Switches: Presence, Depth, Mono/Stereo
- Speaker outputs A & B: 4x 6.3 mm jack
- Input A & B: 2x 6.3 mm jack
- Line output A & B: 2x 6.3 mm jack
- Output impedances: 4, 8 & 16 Ohm
- Dimensions (W x D x H): 445 x 318 x 44 mm
- Weight: 9.1 kg
- Made in USA
|
Price History: Fryette LX II
$1,555.00 |
|
|
Guitar Power Amplifier in Pedal Format
- Compact power amp pedal for electric guitar
- For direct connection to any preamp, pedal or effects unit
- Power: 2 x 50W to 4 ohms
- For 4 - 16 ohm speakers
- Master volume controller
- 2 Inputs (L / R): 2x 6.35 mm jack
- Aux input: 3.5 mm stereo jack with LED
- 2 Speaker outputs (L / R): 6.35 mm jack
- Headphone output: 3.5 mm mini jack
- Dimensions: 124 x 74 x 59 mm
- Includes 24 V / 4.5 A power supply
|
Price History: Harley Benton Custom Line Thunder 99
$89.00 |
|
|
Stereo Tube Power Amplifier
- Power: 2 x 50 W
- Tubes: 3x ECC 83 and 4x 5881
- Stereo channels: left/ right
- Input gain switch
- Volume control per channel
- Presence A and B controller
- Standby switch per stereo side
- 8 and 16 Ohm output for each stereo channel
- Foot pedal connector
- Dimensions: 48 x 8.8 x 30 cm
- Weight: 12 kg
|
Price History: Engl E840/50 Poweramp
$959.00 |
|
|
Power Amp For Electric Guitar
- Complete power amplifier in micro pedal form
- Maximum output: 30 W
- Suitable for direct connection to effects devices
- Delivers pleasant post-stage overdrive at higher volumes
- Master volume control
- Warm/bright toggle switch for adjusting the presence settings
- Status LED
- Output impedance: 8-16 Ohms
- Power via 24 V DC power supply with 2.1 x 5.5 mm AC adapter and polarity (-) inside (included)
- Battery operation is not supported
- Dimensions (L x W x H): 94 x 42 x 52 mm
- Weight: 144 g
|
Price History: Mooer Baby Bomb 30 W
$84.00 |
|
|
Compact power amplifier for electric guitar
- Power amplifier in pedalboard format
- Designed for direct use with a preamp or effect pedal
- Power: 100 W into 8 ohms or 190 watts into 4 ohms
- Class-D technology
- Controls for master volume, bass, mid and treble
- LED peak indicator
- LED signal indicator
- LED power-on indicator
- Input: 6.3 mm jack
- Loudspeaker output (4 - 16 Ohm): 6.3 mm jack plug
- Power supply: AC 220-240 V
- Dimensions: 162 x 100 x 64 mm
- Weight: 0.8 kg
Note: A preamp is required for operation
|
Price History: Harley Benton GPA-100
$72.00 |
|
|
Guitar Amplifier
- Suitable for direct connection with effects devices
- Power: 700 W @ 4 Ohms/350 W @ 8 Ohms
- 3-Band EQ
- 13 dB boost/cut in each frequency band
- Speaker simulation
- Controls for volume, bass, mid and treble
- Power switch on the back
- 1/4" Mono-jack (L/R) inputs on the backside
- 2 (L/R) Speaker Twist/6.3 mm combo outputs on the rear
- 2 (L/R) XLR outputs on the backside
- 2 Cab Sim switches (one for each XLR output) on the rear
- Cold device plug on the back
- Power status LED
- Temperature status LED
- O.C. status LED
- Output impedance: 4-8 Ohms
- Input voltage: 100-230V AC
- Dimensions (L x W x H): 292 x 176 x 56 mm
- Weight: 2.860 g
- Made in USA
|
Price History: Seymour Duncan Power Stage 700
$799.00 |