Befaco

• Analogue kick drum module
• Adjustment possibilities for tune, waveshape (from sine to square), decay, bend and bend time
• Manual trigger button
• Trigger input
• Audio out
• CV inputs for tune, shape, decay and volume
• Current consumption: 26 mA (+12 V) / 12 mA (-12 V)
• Width: 6 HP
• Depth: 30 mm

• Analogue 6-channel VCA and mixer
• Adjustable characteristics per channel from exponential to linear to logarithmic
• Level control per channel
• Output of channel 6 can work as mix output
• Current consumption: 50 mA (+12 V) / 50 mA (-12 V)
• Width: 14 HP
• Depth: 30 mm

• 4-Channel VCA with decay envelopes
• Designed for percussion sounds
• 4 Channels, each with VCA, decay envelope and volume control
• Per channel: Audio input, trigger input, decay CV input, envelope output
• Audio output per channel (can also be used as 4-channel mixer)
• Current consumption: 80 mA (+12 V) / 60 mA (-12 V)
• Width: 12 HP
• Depth: 25 mm

• Voltage controlled rise limiter
• Separate control for rise and fall time via fader and CV input
• Shape controller for setting the characteristic (linear to logarithmic)
• Power requirement: 10 mA (+12 V) / 10 mA (-12 V)
• Width: 6 HP
• Depth: 31 mm

Befaco Pony VCO 1U; compact analog Thru-Zero VCO with build-in Wavefolder and VCA; manual control for VCO frequency with range switch (Full, Octave, Semitone, LFO); octave selector; Timbre control for wavefolder intensity; four selectable waveforms: sine, triangle, sawtooth and square wave; CV inputs for pitch (1V/oct.), FM, Timbre and VCA; Sync input; VCO output; power consumption: 32mA (+12V) / 25mA (-12V); width: 24 HP; depth: 30mm

• Preamplifier for microphone, line and instrument signals
• +48 V Phantom power, switchable
• Impedance selector switch
• Envelope follower with adjustable attack and release time
• Gate and trigger extractor with adjustable threshold
• Audio In: XLR/TRS combo
• Audio out
• Trigger out
• Gate out
• Positive and negative envelope out
• Current consumption: 26 mA (+12 V) / 12 mA (-12 V)
• Width: 8 TE
• Depth: 30 mm

• Dual preamplifier for external signal sources such as guitars, basses, synthesizers, drum computers, etc.
• Two inputs per channel (6.3 mm and 3.5 mm jack), output (3.5 mm jack) and gain control
• Both inputs can be used simultaneously
• Channel 1 normalized to channel 2
• Current consumption: 35 mA (+12 V) / 35 mA (-12 V)
• Width: 4 TE
• Depth: 35 mm

• Programmable CV to MIDI interface
• 8 CV inputs, each assignable to MIDI messages such as CC, Notes, Program Change, NRPN and Clock
• Configurations can be saved
• USB-B port (class compliant) and MIDI-TRS socket for MIDI data transmission
• Consumption: 50 mA (+12 V) / 4 mA (-12 V)
• Width: 6 TE
• Depth: 32 mm
• Incl. MIDI-TRS adapter cable

• Compact stereo mixer
• 4 Channels with volume control and stereo / mono input
• Stereo AUX in
• Stereo output with peak LEDs
• Power requirements: +26 mA (+12 V) / -26 mA (-12 V)
• Width: 6 HP
• Depth: 30 mm

• Ttwo-channel bipolar attenuator for audio and CV signals
• Offset control with +/- 10 V control range
• Two-colour LED indicates signal polarity
• Can be used as DC source without input signal
• Current consumption: 21 mA (+12 V) / 18 mA (-12 V)
• Width: 5 HP
• Depth: 24 mm

• Voltage controllable burst generator
• Generates a sequence of up to 64 trigger pulses that can be set in number, distribution, probability and multiplication / division
• All parameters CV controllable
• Burst loop switchable
• Tap speed
• Inputs for Trigger and Ping
• Outputs for Tempo, EOC and Burst
• Current consumption: 50 mA (+12 V) / 10 mA (-12 V)
• Width: 8 TE
• Depth: 30 mm

• Signal processor with bidirectional switch and gate generator
• Consists of the sections step controller, gate generator and analogue switch
• Muxlicer can be used as a voltage-controlled signal router (8-on-1 or 1-on-8), as a CV sequencer, audio chopper, generate rhythmic gate patterns and more
• Current consumption: 45 mA (+12 V) / 5 mA (-12 V)
• Width: 16 HP
• Depth: 23 mm

• Analogue two-channel filter from the MS-20
• Each channel switchable between 12dB low pass and 6dB high pass
• Per channel controls for filter frequency, resonance, input volume
• 2 CV inputs for filter frequency (1 x with bipolar attenuator)
• Resonance CV input
• Link switch connects both filters in series
• Current consumption: 40 mA (+12 V) / 35 mA (-12 V)
• Width: 17 HP
• Depth: 47 mm

• 4-Channel crossfader for audio and CV signals
• Per channel: two inputs with attenuators, crossfader CV input, crossfader signal LEDs, selector switch for CV/audio characteristic, crossfader output
• Output of channel 4 provides a mix of all channels
• All inputs normalised to 10V for use as CV controllers
• Master crossfader with adjustable delay time (lag) of 0-15 s
• Current consumption: 53 mA (+12 V) / 50 mA (-12 V)
• Width: 12 HP
• Depth: 26 mm

• 6-Channel performance mixer
• Adjustable per channel: Panorama, Hi-EQ, Mid-EQ, Low-EQ
• Mute (switch and button)
• Volume
• Master section with 3-band EQ
• Level LEDs
• Master volume control and stereo output: can be expanded with Befaco Hexpander and Hex Mix VCA
• Current consumption: 106 mA (+12 V) / 88 mA (-12 V)
• Width: 28 HP
• Depth: 27 mm

• Voltage controllable dual wave-folder
• Two independent channels with adjustable wave-folding intensity
• 2 CV inputs per channel (1x with bipolar attenuator)
• Chop output can switch between both output signals without crackling
• Current consumption: 65 mA (+12 V) / 55 mA (-12 V)
• Width: 8 TE
• Depth: 30 mm

• Extension for the Hexmix by Befaco
• Extends each Hexmix channel with 3 AUX sends (selectable pre/post fader)
• Direct output (6.3 mm jack)
• PFL function
• 3 Stereo effects returns
• Stereo headphone output (6.3 mm TRS) with volume control
• LED level indicator for master- or PFL signal
• Stereo master output (2x 6.3 mm jack)
• Power requirement: 90 mA (+12 V) / 85 mA (-12 V)
• Width: 28 HP
• Depth: 27 mm