Black Lion Audio

• Modified "Blue Stripe" compressor based on a device from Chris Lord-Alge
• Discrete circuit with Cinemag transformers based on the original UTC transformers
• Extended functionality with parallel compression
• Classic switching of the ratio via four push buttons
• Adjustable attack and release
• Link connection for coupling two devices for stereo operation
• Input: 1x XLR (balanced)
• Output: 1x XLR
• Link: RCA (unbalanced)
• Power supply: 115/230 VAC internal
• Height: 2 U
• Width: 19"
• Depth: 250 mm

Bundle offer comprising

• USB2.0 Audio Interface
• High-quality, two-channel recording solution with combined microphone and instrument inputs
• Balanced signal path and high quality microphone preamplifier
• Precise Macro-MMC clock
• Power supply filtered with PG-i technology
• Direct monitoring with mix control and mono switch
• AD / DA conversion with up to 24 bit / 192 kHz
• LED level display
• Switchable 48V phantom power
• Mic / instrument input via XLR / jack combo socket
• 2 Balanced line outputs on 6.3 mm TRS jack
• 1 Stereo headphone output on 6.3 mm stereo jack with separate control
• Monitor volume control
• Coaxial S / PDIF input and output
• USB-C connector
• Power supply via USB
• Dimensions: 254 x 230 x 50 mm
• Weight: 1.4 kg
• System requirements: from Win10 (64 bit), from Mac OSX 10.13
• Includes extensive software package (download): Presonus Studio One Artist, iZotope Elements Suite, BrainWorx BX Digital, Lindell 6X500

• Large-Diaphragm Condenser Microphone
• FET circuitry
• Directional characteristic: Cardioid
• Frequency response: 35 - 20,000 Hz (+/- 3.5 dB)
• SPL (sound pressure level): 136 dB (
• Equivalent noise level:
• Switchable pad: -10 dB
• Switchable high-pass filter switch: 80 Hz (6 dB/oct.)
• Requires phantom power: 48 V
• Dimensions (L x W): 46 x 155 mm
• Weight: 0.4 kg
• Includes a microphone shock mount and a bag

• Microphone cable
• XLR 3-pin male - XLR 3-pin female
• Length: 6 m
• Diameter: 6 mm
• Wire cross-section: 2 x 0.22 mm²
• Colour: Black

Black Lion Audio PG-P Type F; portable power conditioner; six filtered and surge protected outputs; surge energy rating: 540 joules; connections: EU Schuko type F combination plugs; status LEDs for grounding, active protection and active filtering; rugged enclosure; 3m power cable; dimensions (LxWxH): 245 x 115 x 44mm

• Classic 312A preamplifier design
• Half rack housing
• Input and output transformer from Cinemag
• Hi-Z input on the front side
• Phase reversal and 18 dB pad switch
• Stepped gain control
• Switchable 48 V phantom power
• Inputs: 1x XLR (balanced), 1x jack (unbalanced)
• Output: 1x Jack (balanced)
• External power supply
• Height: 1 U
• Width: 9.5" (rack mount possible)
• Weight: 1.5 kg

• Classic 312A preamp design with 70 dB gain
• All-rounder for detailed recordings, e.g. Vocals, drums, guitar etc.
• Very low-noise signal path
• Cinemag transformers in the inputs and outputs
• Channels 1 and 2 with additional DI input
• Switchable 48 V phantom power, phase reversal and 18 dB pad (mic-in) per channel
• Max. Input level Mic In: +1 dBu / DI In: +18 dBu
• Frequency range: 10 Hz - 30000 Hz
• Gain Mic In: 26 to 70 dB / DI In: +10 to 53 dB
• THD + N Mic In: 0.01% / DI In: 0.115% (+36 dB gain, +4 dBu output)
• Equivalent input noise Mic In: -120 dBu / DI In: -94 dBu
• Input impedance Mic In: 200 Ohm / DI In: 1.1 MOhm (unbalanced)
• Max. Output level: +26 dBu
• Output impedance: 600 ohms
• 4 Inputs: XLR (balanced)
• 2 Inputs: jack (unbalanced)
• 4 Inputs: XLR and jack (balanced)
• External power supply
• Height: 1 U
• Width: 19"
• Depth: 178 mm
• Weight: 4.5 kg

• Classic 1073 preamplifier design
• Half rack housing
• Input and output transformer from Cinemag
• Hi-Z input on the front side
• Phase reversal and 18 dB pad switch
• Stepped gain control
• Up to 70 dB gain
• Switchable 48 V phantom power
• Variable output control
• Inputs: 1x XLR (balanced), 1x jack (unbalanced)
• Output: 1x Jack (balanced)
• External power supply
• Height: 1 U
• Width: 9.5" (rack mount possible)
• Weight: 1.4 kg

• Ultra-low jitter design
• 8 Selectable sample rates : 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz
• 6 BNC outputs (75 Ohm) with separate output drivers for maximum isolation
• Coaxial S/PDIF output (75 Ohm), 44.1 kHz - 192 kHz
• Optical S/PDIF output (75 Ohm), 44.1 kHz - 96 kHz
• Symmetrical AES output (110 Ohm), 44.1 kHz - 192 kHz
• LED display with frequency display
• External 9 V-DC power supply with 6 W power consumption
• Dimensions (W x D x H): 165 x 152 x 44.5 mm
• Weight: 1 kg
• Incl. Rack ears for 1U rack mount

• FET Compressor based on a legendary model
• Optimized circuit with new output transformer
• Extended functionality with variable high-pass filter in the sidechain, parallel compression and switchable low- and high-pass filter in the signal path
• Classic switching of the ratio via four pressure switches
• Attack and release continuously adjustable
• Link connection for coupling two devices for stereo operation
• Sidechain filter switchable: Off, 100, 200, 300 and 400 Hz
• Lowpass filter: 100 Hz, -6 dB / oct
• Highpass filter: 10 kHz, -6 dB / oct
• Frequency range: 20 - 22,000 Hz +/- 1 dB
• Signal-to-noise ratio:> 86 dB
• THD + N: 0.4%
• Input: 1 x XLR (balanced)
• Output: 1 x XLR
• Link: RCA (unbalanced)
• Power supply: 115/230 VAC internal
• Width: 19"
• Height: 2 HE
• Depth: 250 mm
• Weight: 6.58 kg

• All-rounder for detailed pictures, e.g. Vocals, drums, guitar
• The sound captivates with clarity and warmth
• Low-noise circuit design
• Gain: +16 dB to +67 dB infinitely variable
• Equivalent Input Noise: -108 dB
• Switchable 13 dB PAD
• Switchable phase reversal
• Input impedance: 600 Ohms
• Output impedance: 600 Ohms
• High-impedance instrument input (DI)
• +48 V phantom power
• Weight: 900 g
• Module without frame
• Construction: API Series 500 format
• Made in USA

• Classic 1073 preamp design with 70 dB gain
• Discrete Class A circuit
• Input and output transformers from Cinemag
• Channels 1 and 2 with additional DI input
• Switchable 48 V phantom power per channel
• Max. Input level Mic In: +1 dBu / DI In: +18 dBu
• Frequency range: 10 - 30000 Hz
• Gain Mic In: 12 to 70 dB adjustable in steps
• Switchable phase inversion
• THD + N Mic In: 0.02% (+45 dB Gain, +4 dBu Output) / DI In: 0.03% (+25 db Gain, +4 dBu Output)
• EIN (Equivalent Input Noise) Mic In: -105 dBu / DI In: -100 dBu
• Input impedance Mic In: 200 Ohm / DI In: 1.1 MOhm (unbalanced)
• Max. Output level: +28 dBu
• Output impedance: 600 ohms
• 4 Balanced XLR inputs
• 2 Unbalanced 6.3 mm jack inputs
• 4 Balanced XLR and jack outputs
• External power supply
• Height: 2 U
• Width: 19"
• Depth: 178 mm
• Weight: 3.7 kg

• The sound is based on vintage channel strips
• Preamplifier with Cinemag input transformer and 2 discrete BLA1831 OP amps
• Adjustable input and output
• Up to 65 dB gain
• Switchable 48V phantom power
• Input level switchable between line and microphone level
• Output signal with reversible polarity
• Switchable low pass at 80 Hz and high pass at 10 kHz
• Passive program EQ with Cinemag coil and separately adjustable cut and boost for bass and treble
• Low noise circuit design
• EQ bypass switch
• Exit with VU meter
• Input: 1x XLR (balanced)
• Output: 1x XLR (balanced)
• Power supply: 115/230 VAC internal
• Height: 2 U
• Width: 19"
• Depth: 250 mm
• Weight: 4 kg

• Hybrid compressor with FET circuit and T4BLA optocoupler
• FET compressor from the Seventeen based on a legendary model
• Compressor order can be selected or dual mono mode
• Cinemag LA-2A input transformer
• Optimised circuit with new output transformer
• Infinitely variable attack and release
• Link connection for coupling two devices for stereo operation
• Frequency range: 15 Hz - 20 kHz, +/- 1 dB
• THD + N: 0.3%
• Inputs: 2x XLR (balanced), 2x jack (balanced)
• Outputs: 2x XLR (balanced), 2x jack (balanced)
• Link: 2x Jack (unbalanced)
• Power supply: 115/230 VAC internal
• Height: 2 U
• Width: 19"
• Depth: 250 mm
• Weight: 8 kg

• All-rounder for detailed pictures, e.g. Vocals, drums, guitar etc.
• Clear and full of sound
• Channels 1 and 2 with additional DI input
• Switchable 48 V phantom power per channel
• Maximum input level Mic In: +1 dBu / DI In: +18 dBu
• Frequency range: 10 Hz - 30 kHz
• Gain Mic In: 0 to 65 dB / DI In: +14 to 65 dB
• Infinitely variable
• Switchable pad Mic In: -10 dB / DI In: -13 dB
• Switchable phase reversal
• THD + N Mic In: 0.027% / DI In: 0.11% (+ 40dB Gain, +4 dBu Output)
• ON Mic In: -108 dB / DI In: -82 dB
• Input impedance Mic In: 6 kOhm / DI In: 1.1 Mohm (unbalanced)
• Maximum output level: +26 dBu
• Output impedance: 600 Ohms
• Inputs: 4x XLR (balanced), 2x jack (balanced)
• Outputs: 4x XLR and jack (balanced)
• Power supply: 24 VAC external
• Format: 19" / 1 HE
• Depth: 195 mm
• Weight: 2.8 kg

• High-quality, two-channel recording solution with combined microphone and instrument inputs
• Balanced signal path and high quality microphone preamplifier
• Precise Macro-MMC clock
• Power supply filtered with PG-i technology
• Direct monitoring with mix control and mono switch
• AD / DA conversion with up to 24 bit / 192 kHz
• LED level display
• Switchable 48V phantom power
• Mic / instrument input via XLR / jack combo socket
• 2 Balanced line outputs on 6.3 mm TRS jack
• 1 Stereo headphone output on 6.3 mm stereo jack with separate control
• Monitor volume control
• Coaxial S / PDIF input and output
• USB-C connector
• Power supply via USB
• Dimensions: 254 x 230 x 50 mm
• Weight: 1.4 kg
• System requirements: from Win10 (64 bit), from Mac OSX 10.13
• Includes extensive software package (download): Presonus Studio One Artist, iZotope Elements Suite, BrainWorx BX Digital, Lindell 6X500

• Precise signal separation and noise reduction
• High musicality and detailed harmonic content
• Ultra-low jitter design 0.6pS RMS
• 8 Selectable sample rates: 44.1 KHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz
• 6 BNC outputs (75 Ohm) with separate output amplifiers for maximum isolation
• Coaxial S/PDIF output (75 Ohm), 44.1 kHz - 192 kHz
• Optical S/PDIF output (75 Ohm), 44.1 kHz - 96 kHz
• Balanced AES output (110 Ohm), 44.1 kHz - 192 kHz
• 1 U rack mounting with mounting accessories included
• LED display with frequency display
• External 9 V DC power supply (6 W power consumption)
• Dimensions (W x D x H): 165 x 152 x 445 mm
• Weight: 1 kg

• Compact and very accurate word clock generator
• Robust metal housing for maximum shielding
• 6x Selectable sample rates from 44.1 kHz up to 192 kHz
• 3x 75 Ohm BNC outputs @ 5V
• Ultra-low jitter: Max. 1 picosecond RMS (OSC)
• Under 10 picoseconds on the output
• External power supply: 9VDC (110/220 VAC compatible)
• Size: 8 x 10 cm
• Weight: 340 g

• Ideal for vocals, drums, guitar etc.
• Mix of vintage sound and modern clarity
• Line and instrument input via jack sockets on the front, individually switchable for each channel
• IC-based input stage for modern transparent sound
• Output stage with Cinemag transformer
• Frequency range: 10 - 30,000 Hz
• Gain: 0 - 62dB continuously adjustable
• Switchable -10dB PAD
• Switchable phase reversal
• THD+N (@ +4dBu output): 0.0033% @ +10dBu gain; 0.0054% @ +24dBu gain, 0.027% @ +40dBu gain
• 2 Microphone inputs: XLR, balanced
• 2 Line/Hi-Z inputs: 6.3 mm jack
• 2 Outputs: 6.3 mm jack, balanced
• Headroom: 26 dB
• Phantom power: +48 V
• External 24VAC power supply
• Design: 1U at half rack width
• Mounted in standard 19-inch cases via attached rack ears
• Dimensions (L x W x H): 24 x 18 x 5 cm
• Weight: 1.9 kg