Dangerous Music

• Audiophile conversion that meets the highest mastering requirements
• 4 x Digital input formats: USB, AES, ADAT, Optical SPDIF (Toslink)
• Sampling frequencies from 44.1 to 192 kHz with automatic detection
• High-definition stereo reference monitoring for stereo or surround (up to 7.1)
• Ultra-low jitter clocking technology
• USB input for direct DAW connection
• Compatible with ST / SR monitor for remote switching
• Signal present" LEDs (green: -40 dB or more, red: 3 consecutive samples)
• On The Fly Input switching and calibration

Specifications:

• Noise ratio A-weighted (20 - 20k Hz):
• Noise balance unweighted (20 - 20k Hz):
• Dynamic range A-weighted (20 - 20k Hz):
• Dynamic range unweighted (20 - 20k Hz):
• Total harmonic distortion (1 kHz unweighted, 20 - 20k Hz, +4 dBu out):
• Distortion factor (1 kHz unweighted, 20 - 20k Hz, + 22 dBu out):
• Frequency response (96 kHz sample rate):
• DC to 20 kHz: +0 / -0.25 dB
• DC to 30 kHz: +0 / -0.5 dB
• DC to 40 kHz: +0 / -1.0 dB
• Jitter: 16ps (100Hz to 40kHz), 18ps (100Hz to 1MHz)
• Crosstalk attenuation (at 1 kHz):> 114 dBu
• Format: 19"/ 1U

• XLR and D-Sub connectors
• 2 parallel stereo outputs: Main Monitor
• Switchable sum insert: send return as XLR
• Rastered volume control
• Three different analog colouring options: "Harmonics", "Paralimit" and "X-Former"
• Easy to assign and add colouring options via elegant user interface
• The 'Harmonics' processor generates harmonic distortions, which can be mixed with the original using the "STIMULATE" control
• Paralimit' is an FET limiter (fixed), the controller of which is called "BLEND" for parallel mixing
• Both processors can be applied to the stereo mix or to either the stereo input pair 13/14 or 15/16
• 'X-Former' inserts two custom cinemag transducers in the stereo mix
• The "SATURATE" control can be used to determine the degree of saturation
• All three processors can work simultaneously
• The order of distortion and limiter in the signal flow can be exchanged
• Cascadable and compatible with 2-Bus LT
• Exclusively audiophilic components in the signal path
• Endless headroom
• Crystal-clear sound and stereo image with outstanding 3-dimensionality
• Frequency range: from 10 Hz to 50 kHz linear (
• Input resistance: 25K ohms balanced
• Output resistance: 50 ohm balanced
• Format: 19 "/ 2U

• Analogue lockable volume control (no VCAs)
• 4 Analog inputs (sub-D25 / Tasc.)
• 3 Loudspeaker outputs (sub-D25 / Tasc.)
• Programmable input amplification
• Input compensation for -10 dBV and +4 dBu sources
• Input 4 has a variable volume adjustment
• Programmable output amplification
• Adjust the volume of all speakers including the subwoofer
• Assignable subwoofer output
• Programmable subwoofer level
• Selectable subwoofer filter
• Comprehensive mute and solo functions
• Flexible stereo headphone system with main and auxiliary inputs, or cue mix, headphone out
• Talkback system
• Size: 19 "/ 1U

• Digitally controlled volume controller with extremely precise L/R synchronization and adjustable dim
• Five analog and digital inputs directly accessible (analog stereo, analog sum, USB, AES/SPDIF, Bluetooth) - multiple selection possible
• Bluetooth for wireless audio streaming
• 8-Channel analog summator (channels 7+8 mono switchable)
• Built-in talkback microphone with push-button activation (on device or via app)
• Talkback via Smartphone (Bluetooth) possible
• Two headphone amplifiers with independent source selection and volume control
• Three independent loudspeaker outputs (selectable on device or via app)
• Programmable loudspeaker selection allows mono and/or subwoofer assignment to all outputs (on device or via app)
• Speaker outputs 2 and 3 can be trimmed
• Reference class DA-converters for digital inputs
• Free D-BOX+ App for remote control of all essential functions (Volume, Dim, Talkback, I/O selection and much more) for iOS 10.2 or higher and Android 5.0 or higher
• USB audio connection for Mac OSX 10.10 or higher and Win 7 or higher
• Dimensions (W x D x H): 483 x 344 x 43 mm
• Weight: 5.26 kg

• Consists of Dangerous Music Convert-8, Convert AD+ and D-Box+

Convert-8 multi-channel DA converter

• For highest mastering demands
• 4 Digital input formats: USB, AES, ADAT, Optical SPDIF (Toslink)
• Sampling frequencies from 44.1 to 192 kHz with automatic detection
• High-definition stereo reference monitoring for stereo or surround (up to 7.1), extremely low-jitter clock
• USB input for direct DAW connection
• Compatible with Monitor ST/SR for remote switching
• Loop-through of digital input for external level metering

Convert AD+ stereo AD converter:

• 2 Selectable, discrete stereo input paths
• "Clip Guard" ensures that the red LEDs at the destination (e.g. DAW) no longer light up
• Custom-made digital display with normal and peak hold modes for precise visual feedback
• "Zoom View" for more accurate, magnified resolution
• Word Clock with three modes: Internal, External and Master
• X-FORMER
• EMPHASIS shelving EQ/compressor
• USB connection for Mac/PC
• Rich I/Os: 2 switchable stereo input paths, 2 AES outputs, ADAT optical output, SPDIF optical output, SPDIF COAX output

D-Box+ Combined summing and monitoring system:

• Digitally controlled volume control with extremely precise L/R synchronisation and adjustable dim
• 5 Analogue and digital inputs directly accessible (Analogue Stereo, Analogue Sum, USB, AES/SPDIF, Bluetooth) - multiple selection possible
• 8-Channel analogue summing (channel 7+8 mono switchable)
• Built-in talkback microphone with push-button activation (on the unit or via app)
• 2 Headphone amplifiers with independent source selection and volume control
• 3 Independent speaker outputs (selectable on the unit or via app)

• For Dangerous Monitor ST
• Dangerous Monitor ST and SR are a high-quality 5.1 surround monitoring systems
• Fast switching between stereo and 5.1 listening configuration
• Input and output assignment in the D-Sub-25 (Tascam) format
• Size: 19 "/ 1U

• Audiophile conversion
• 5 Digital input formats: USB, AES, S/PDIF, ADAT, Optical S/PDIF (Toslink)
• Sampling frequencies from 44.1 to 192 kHz with automatic detection
• High definition stereo reference monitoring
• Extremely low-jitter clock
• USB input for direct DAW connection
• USB uplink: Switched to USB, the otherwise unused USB input is fed from the AES-2 input
• Compatible with Monitor ST/SR for remote controlled switching
• Precise level display (peak meter) as used in the Dangerous Master
• Loop through of digital input for external level display

Specifications:

• Signal-to-noise ratio A-weighted (20 - 20k Hz):
• Signal-to-noise ratio unweighted (20 - 20k Hz):
• Dynamic range A-weighted (20 - 20k Hz):
• Dynamic range unweighted (20 - 20k Hz):
• Total harmonic distortion (1 kHz unweighted, 20 - 20k Hz, +4 dBu out):
• Total harmonic distortion (1 kHz unweighted, 20 - 20k Hz, + 22 dBu out):
• Frequency response (96 kHz sample rate):
• DC to 20 kHz: +0 / -0.25 dB
• DC to 30 kHz: +0 / -0.5 dB
• DC to 40 kHz: +0 / -1.0 dB
• Jitter: 16ps (100Hz to 40kHz), 18ps (100Hz to 1MHz)
• Crosstalk rejection (at 1 kHz):> 114 dBu
• Design: 19"/1U

• Sample frequency switchable in 6 steps
• For universal compatibility with other devices
• Calibration level in 3 steps switchable for compatibility with other devices
• Two selectable discrete stereo input paths
• Clip Guard" prevents the red LEDs on the target (such as the DAW) from coming on
• Custom-made digital display with normal and peak hold mode for precise optical feedback
• "Zoom View" For a more accurate, enlarged resolution, only the upper 10dB of the signal level is displayed
• Word Clock with three modes: Internal, External and Master
• X Shaper
• EMPHASIS Shelving EQ / Compressor
• USB port for Mac / PC
• Frequency Response (@ 96kHz): 20Hz to 20kHz (+0 / -0.035dB)
• IMD (SMPTE): IMD 60Hz / 7kHz +4 dBu in:
• Jitter: 16ps (100Hz to 40KHz), 18ps (100Hz to 1MHz)
• Crosstalk attenuation: 118dBu from 15 Hz to 40kHz (+/- 0.04 dB)
• 3-Pin IEC Auto Switching Power Supply, 120V (US) / 240V (Europe)
• Dimensions: 19" 1U

Inputs / outputs:

• 2 Switchable stereo input channels
• 2 AES outputs
• ADAT Optical output
• SPDIF Optical output
• SPDIF COAX output

Dangerous Music 2 Bus XT; 16-channel analog summing unit; XLR and D-Sub connectors, 2 parallel stereo outputs (main + monitor); 2 different circuits to color the signal: Transformer and Coherence, applicable to sum, channels 15/16 or hard bypass; Coherence has a blend control; 2 of 8 stereo pairs switchable to dual mono (1/2 & 9/10); Expansion input for with additional summers like 2-BUS(+), 2-BUS LT, D-BOX(+) or just another 2-Bus-XT; Frequency range: from 20 Hz to 50kHz linear (

• With USB and D/A converter
• Connection of 2 monitor pairs - can also be switched simultaneously
• 4 Input sources: 2x analogue
• 1x AES / SPDIF and 1x USB
• AES/SPDIF with thru-port
• 2x Headphone jack - monitor output or multiple sources
• Analogue input 1: 3.5 mm mini jack stereo -10 dBV
• Analogue input 2: XLR / jack combo jack
• USB input with up to 24 bit/192 kHz for Windows and Mac

• Selectable stereo operation or dual mono
• Compression without any distortion even at 20 dB gain reduction
• Better stereo imaging thanks to dual detectors
• Sophisticated side-chain with bass cut, de-esser and external side-chain
• Targeted control of contours with soft knee and manual time variations
• Additional control with Smart Dynamic: switchable limiting for transient peaks only
• Visual monitoring options with a switchable and clearly arranged VU meter
• VU meter is calibrated
• Stereo link offers easy control over gain and threshold
• Frequency range: +/-0.25 dB from 15 Hz - 80 kHz
• Max. level: > +27 dBu
• Inherent noise:
• THD+N:
• IMD:
• Crosstalk rejection: > 115 dB @1kHz
• Input impedance 20 kOhm
• Output impedance: 50 ohm
• Side-chain filter
• Bass cut 6 dB / octave, -3 dB at 60 Hz
• De-Ess via switchable "sibilance boost": Baxandall high shelf +2 dB at 5 kHz
• External side-chain: XLR send and return per channel
• 2x XLR inputs
• 2x XLR outputs
• Format: 19" / 2U

• All potentiometers are screened for accurate and reproducible work
• Wide Q shelving for a natural and open sound character
• 7 Positions High Pass and Low Pass Filter on Relays for Phase Equality
• 8 Position high and low frequency selection
• 5 dB Cut and Boost Controls in 1 / 2dB for accurate settings
• Frequency range: +/- 0.1 dB from 10 Hz to 20 kHz, +/- 0.2 dB from 1 Hz to 80 kHz
• Maximum level: > +28 dBu
• Noise floor:
• THD + N:
• IMD:
• Crosstalk suppression:> 105 dB
• Input impedance: 25K ohms
• Output impedance: 50 ohms
• Dimensions: 19 " 1U