Darkglass

• Bass Distortion
• For aggressive full and fat sound
• High-pass control from 100 - 1000Hz, low-pass from 50 - 500Hz, level, drive, mix and mids
• Input: 6.3 mm Jack
• Output: 6.3 mm Jack
• Connection for 9 V DC power supply with negative pole inside (not included)
• Dimensions: 111 x 64 x 43 mm
• Weight: 250 g

• With different amp characters
• Controls for Level, Blend, Drive, ERA, buffer bypass
• Original Hybrid FET/CMOS gain stages
• Operates on 9V DC power supply (not included - available separately under article nr 409939)
• Made in Finland

• 1 Channel
• Power: 500 W
• High efficiency custom designed class D power amplifier
• Integrated alpha omega distortion
• Speaker simulation with three slots for high-resolution impulse responses for headphones and balanced XLR DI output
• One button compressor with intelligent make-up gain
• New low-noise graphical equaliser
• Controls: Compressor, drive, level, mod, blend, 6-band graphical EQ, master
• Switches: Passive/active, distortion on/off, bite on/off, growl on/off, mute, cab select, ground lift
• Effects: Alpha omega drive
• Min. speaker impedance: 2 Ohm
• Serial effects loop
• Dimensions (W x D x H): 230 x 180 x 71 mm
• Weight: 2.4 kg
• Made in Finland

Connections:

• Input: 6.3 mm jack
• DI output: XLR
• FX send / return: 2x 6.3 mm jack
• Aux input: 3.5 mm stereo jack
• Headphone output: 6.3 mm stereo jack
• Footswitch: 6.3 mm jack
• USB-C
• Speaker output: Speaker twist

All the features of the craved B7K, with the ability to better sculpture the tone. On the Low Mids the center frequency can change from 1 kHz to 500 Hz, and on the High Mids from 3 kHz to 1.5 kHz.

• Overdrive
• Delivers punchy, dynamic sound of the B3K plus a four-band EQ and a DI Out for even greater studio and live versatility
• Controls: Blend - Level - Drive - Low - Low Mids - Hi Mids - Treble
• Buttons: 1 kHz/500 Hz - 3 kHz/1.5 kHz - Ground Lift
• Switches: Attack - Grunt
• LED: Effect On
• Foot switch: Effect bypass
• True bypass
• Connections: Input (6.3 mm jack) - output (6.3 mm jack) - direct output (6.3 mm stereo jack) - parallel output (6.3 mm jack) - power supply connector (coaxial jack 5.5 x 2.1 mm - negative pole inside)
• Power consumption: 20 mA
• Power supply with a 9 V DC power supply (not included - matching power supply: Article Nr 409939)
• Dimensions (W x D x H): 106 x 120 x 45 mm
• Weight: 350 g
• Made in Finland

Note: No battery operation possible.

• 1 Channel
• Power: 900 Watt
• Dual-drive engine with mod control for infinitely adjustable (no fixed increments or steps) combination of alpha and omega drive circuits
• Latency-compensated post DI with digital speaker simulation
• Headphone output with speaker simulation
• Three impulse response slots selectable via cab select switch
• Adjustable VCA compression at studio quality
• Controls: Comp, drive, level, mod, blend, gain, master, headphone volume
• Switch: Input passive/active, distortion, bite, growl, mute, impedance: 4/2 Ohm, GND lift, cab select
• Dimensions (W x D x H): 267 x 254 x 70 mm
• Weight: 2.9 kg
• Includes intelligent footswitch
• Made in Finland

Connections:

• Input: 6.3 mm jack
• DI out: XLR
• FX send & return: 2x 6.3 mm jack
• Aux in: 3.5 mm stereo jack
• Headphone output: 6.3 mm stereo jack
• Pre & post DI out: 2x XLR
• MIDI in
• Footswitch input: 6.3 mm jack
• Micro USB

• Has all control elements of the Microtubes X7
• Allows an exact selection of the frequencies to be compressed and saturated
• With 4 additions to the X7 function: 6-band graphic EQ, Impulse Response speaker simulation, Aux Input & Clean Channel
• Controls: High-pass frequency, high drive, high level, low-pass frequency, low comp, low level, master, low shelf, 250 Hz, 500 Hz, 1.5 kHz, 3 kHz, high shelf
• Push-buttons: Low-pass frequency: 50 Hz / 250 Hz / 500 kHz; high-pass frequency: 100 Hz / 500 Hz / 1 kHz, Cab Sim On/Off
• Foot-switch: Bypass effect
• Input: 6.3 mm Jack
• Output: 6.3 mm Jack
• DI Out (XLR)
• USB
• Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, minus pole inside
• Current consumption: 200 mA
• Power supply via 9 V DC power supply unit (not included in delivery - suitable power supply unit: Article Nr. 409939)
• Dimensions (W x D x H): 125 x 96 x 57 mm
• Weight: 430 g
• Made in Finland

Note: Battery operation is not supported.

• Distortion
• Improved V3 version of Vintage Deluxe
• Featuring the warm tube sounds of the vintage Microtube Vintage, it offers a new, more powerful active 4-band EQ and a new parallel and XLR DI output.
• Controls: Blend, Level, Drive, Low, Lo Mids, Hi Mids, Treble
• Pushbuttons: Lo Mids 1 kHz / 500 Hz, Hi Mids 3 kHz / 1.5 kHz
• Switch: Attack, Grunt
• LED: Effect On
• Footswitch: Effect Bypass
• Input and output: 6.3 mm Jack
• Parallel output: 6.3 mm Jack
• Direct output XLR
• Power adapter connector (female connector 5.5 x 2.1 mm, negative pole inside)
• Power consumption: 30 mA
• Power supply via 9 V DC power supply (not included - matching power supply: Article Nr. 409939)
• Dimensions (W x D): 107 x 120 mm
• Weight: 350 g
• Made in Finland

Note: Battery operation is not supported.

• Overdrive
• Successor to the renowned B3K CMOS Overdrive
• All original features with additional mid-boost to restore the mids for natural character and a tone button instead of the Attack switch
• A perfect combination of brutality and clarity provides a defined and powerful saturation in an easy-to-use format
• Controls: Drive - Level - Tone - Blend
• Buttons: Grunt - Mid Boost
• LED: Effect On
• Foot switch: Effect bypass
• Connections: (6.3 mm jack), output (6.3 mm jack), power supply connection (coaxial socket 5.5 x 2.1 mm - negative pole inside)
• Power consumption: 20 mA
• Power supply with a 9 V DC power supply (not included - matching power supply: Article Nr 409939)
• True bypass
• Dimensions (W x D x H): 75 x 113 x 45 mm
• Made in Finland

Note: No battery operation possible.

• Bass overdrive
• New additional features over the first version: individual user-loadable speaker simulation Impulse Response, micro-USB B connection for connection to a PC / Mac, 3.5 mm headphone output with speaker simulation, balanced XLR output with switchable speaker simulation
• Controls: Drive, Level, Blend, Master, Treble, Hi Mids, Lo Mids, Bass
• Snap fasteners: Cab Sim, Ground Lift
• Switch: Attack, Grunt, Lo Mids (500 Hz / 1 kHz / 250 Hz), Hi Mids (1.5 kHz / 3 kHz / 750 Hz)
• LED: Effect On, Distortion
• Footswitch: Effect bypass, distortion
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Direct output: XLR
• Aux input: 3.5 mm jack
• Headphone output: 3.5 mm jack
• Power supply connection (coaxial connector 5.5 x 2.1 mm - negative polarity inside)
• Power consumption: 110 mA
• Power supply via 9 V DC power pack (not included, suitable power pack: Art.409939)
• True bypass
• Dimensions (W x D x H): 120 x 107 x 57 mm
• Weight: 430 g
• Made in Finland

Note: Battery operation is not supported.

• Preamp with additional Aux In
• 2 Distortion circuits
• High dynamic range
• Active 6-band graphic EQ
• True bypass
• Headphone output
• Balanced direct output with switchable digital impulse response speaker emulation
• Controls: Mod, Blend, Level, Drive, 6-Band EQ
• Push buttons: Growl, Bite, Ground Lift, Cab Sim
• LED: Effect On / Off
• Footswitch: Effect bypass
• AC adapter: coaxial connector 5.5 x 2.1 mm, negative polarity inside
• Current consumption: 30 mA
• Power supply via 9 V DC power pack (not included - suitable power pack: Art.409939)
• Dimensions (W x D x H): 125 x 57 x 96 mm
• Weight: 430 g

Note: Battery operation is not supported

• Full sound with low weight thanks to neodymium magnets
• Equipped with: 2 x 10" Custom Eminence Neodymium speakers and
• 1" 1 "P Audio HF Driver tweeter with adjustable horn
• Power rating: 500 W.
• Cabinet construction: bass reflex
• Frontloaded
• Impedance: 8 ohms
• Connections: 2 Combo jacks Speaker Twist / 6.3 mm jack
• Housing material: Paulownia
• Baffle material: Baltic birch
• Dimensions: (W x H x D): 420 x 626 x 429 mm
• Weight: 15.2 kg
• Colour: Carbon

• 1 Channel
• Power: 500 W
• High efficiency custom designed class D power amplifier
• Integrated microtube distortion
• Speaker simulation with three slots for high-resolution impulse responses for headphones and balanced XLR DI output
• One button compressor with intelligent make-up gain
• New low-noise graphical equaliser
• Controls: Compressor, drive, level, mod, blend, 6-band graphical EQ, master
• Switches: Passive/active, microtubes on/off, VMT/B3K, mute, cab select, ground lift, on/off
• Effects: Microtube drive
• Serial effects loop
• Min. speaker impedance: 2 Ohm
• Dimensions (W x D x H): 230 x 180 x 71 mm
• Weight: 2.4 kg
• Made in Finland

Connections:

• Input: 6.3 mm jack
• DI output: XLR
• FX send / return: 2x 6.3 mm jack
• Aux input: 3.5 mm stereo jack
• Headphone output: 6.3 mm stereo jack
• Footswitch: 6.3 mm jack
• USB-C
• Speaker output: Speaker twist

• Provides the transparency of the Microtube B7K EQ as a built-in pre-amp
• Control: Bass + -12 dB @ 70Hz - Mids: + -12 dB @ 500Hz - Hi Mids + -12 dB 2.8kHz
• Including potentiometer
• The Tone Capsule can be used with one or two batteries in series for 9 V or 18 V operation (battery clips not included)

• "Super intelligent" model
• For the Darkglass Alpha · Omega 900 amplifier
• 3 Programmable foot switch for assigning the channels (clean, alpha, omega, mod) and the compressor status (on / off) and a separate mute switch
• The functions of the channel foot switches are programmed via the Darkglass Suite and stored on the Alpha-Omega 900 amplifier
• Dimensions: (W x D x H): 220 x 48 x 45 mm
• Weight: 450 g

Darkglass DG-212 N Cover; protective cover for darkglass DG212N, robust and water resistant, padded

• New design allows programming of every part of the pedal, from compression, distortion and cabinet simulation in the signal chain to presets via MIDI and Darkglass Suite software
• Offers more versatility than the other versions
• Bluetooth Audio In and additional settings via the Darkglass Suite Mobile App
• Controls: Compression, Drive, Alpha-Omega Distortion, Blend, Level,
• Headphone Volume
• Push buttons: Ground Lift
• LED: Effect On
• Footswitches: Alpha (Compressor Mode), Beta (Distortion Mode) and Gamma (Cabinet Simulation)
• Input: 6.3 mm jack
• Aux input: 3.5 mm mini stereo jack
• Audio output: XLR
• Audio output L&R: 6.3 mm jack
• Headphone output: 3.5 mm mini stereo jack
• USB C connector
• Midi input: 3.5 mm jack
• Mains adapter connection: Barrel connector 5.5 x 2.1 mm, negative polarity inside
• Power consumption: 500 mA
• Power supply via 9 V DC mains adapter (not included in delivery, suitable mains adapter: Art.409939)
• Dimensions (W x D x H): 180 x 120 x 60 mm
• Weight: 700 g

Note: Battery operation is not supported.

• 3 Switchable compressor models
• Limited edition in black
• By digitally modeling the side-chain circuits of some of the most legendary compressors, the Hyper Luminal captures their
• Characteristic behavior while maintaining a fully analog signal path
• Touch-through metal sensors for Ratio and Mode
• Controls: Blend, Time, Level, Compression, Ratio
• Switch: Mode
• LED: Effect On, Ratio, Gain Reduction
• Footswitch: Effect bypass
• Input: 6.3 mm Jack
• Output: 6.3 mm Jack
• Mains adapter connection (hollow plug socket 5.5 x 2.1 mm, minus pole inside)
• Current consumption: 250 mA
• Power supply via 9 V DC power supply unit (not included in delivery - suitable power supply unit: Article Nr. 409939)
• Dimensions (W x D x H): 42 x 111 x 64 mm
• Weight: 230 g
• Colour: Black
• Made in Finland

Note: Battery operation is not supported.

• Overdrive with audio interface
• The most versatile bass distortion from Darkglass with integrated audio interface, speaker simulation and Bluetooth (Bluetooth audio in and settings via Darkglass Suite app)
• 6-Band graphic EQ
• Headphone output and balanced direct output
• Controls: Compression, Drive, Character, Blend, Level, 6 Band Eq.
• Footswitches with integrated rotary controls - each of which stores compression, distortion, impulse responses, EQ parameters and signal chain settings
• Instrument input: 6.3 mm jack
• XLR Di-Out (Ground Lift)
• Balanced output: 2x 6.3 mm jack
• Aux input: 3.5 mm
• Headphone output: 3.5mm
• Midi input: 3.5 mm
• Digit cutout interface: USB-C
• Power supply connection: barrel connector 5.5 x 2.1 mm, negative polarity inside
• Current consumption: 500 mA
• Power supply via 9 V DC power supply (not included - suitable power supply: Art.409939)
• Dimensions (W x D x H): 180 x 120 x 60 mm
• Weight: 0.700 kg

Note: Battery operation is not supported.

• A clean preamp that amplifies attack and presence while shaping the mid-range for a very percussive and aggressive character
• With a sound circuit that can be controlled with the character knob
• An active 3-band equalizer with semi-parametric midpoints
• Suitable as a supplement to distortion pedals as well as a stand-alone bass preamplifier
• Controls: Boost, Character, Mid Gain, Mid Freq, Bass, Treble
• LED: Effect On
• Foot-switch: Bypass effect
• Input: 6.3 mm Jack
• Output: 6.3 mm Jack
• Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, minus pole inside
• Power supply with a 9 V DC mains adapter (not included - suitable mains adapter: Article Nr. 409939)
• Dimensions (W x D x H): 64 x 111 x 43 mm
• Weight: 250 g
• Made in Finland

Note: Battery operation is not supported.