DBX

• 2x15 Band
• ± 6/12 dB Input gain
• 4-Segment output status LED
• Dynamic range >108 dB
• Format: 1U
• XLR / jack input/output
• Internal power adapter

• Auto-EQ for automatic speaker / room tuning
• Separate microphone input with phantom power for measuring microphone and pink noise generator for room measurement
• Real Time Analyser
• Up to 2.7 sec configurable delay
• Stereo graphic or parametric input equalizer, 4 band parametric output EQ, classic dbx compression, crossover, feedback eliminator, peak stop limiter and 120A subharmonic synthesizer for signal processing
• Phase and polarity at the output adjustable and Auto Gain Control
• 24-Bit DA and 24-bit Type IV AD converters provide 110 dB of dynamic response
• Graphical user interface or GUI for fast and safe editing of the parameters
• 2 XLR inputs and 6 XLR outputs
• Format: 19", 1U

• Converts 2 unbalanced signals (2-pin - 6.3 mm jack) into balanced (3-pin - XLR)
• With ground-lift function
• Adjustable volume of the input signal
• Input impedance: 50 kΩ
• Output impedance: 600 Ohm
• Sturdy metal body
• Dimensions 12 x 14 x 4 cm
• Colour: Black

Bundle offer comprising

• Digital Speaker Management SystemWith the Drive Rack 260, dbx introduces a new loudspeaker management system for live and installation applications. It combines all the important functions necessary for an optimal loudspeaker management in PA applications

• Auto-EQ for automatic speaker / room tuning
• Separate microphone input with phantom power for measuring microphone and pink noise generator for room measurement
• Real Time Analyser
• Up to 2.7 sec configurable delay
• Stereo graphic or parametric input equalizer, 4 band parametric output EQ, classic dbx compression, crossover, feedback eliminator, peak stop limiter and 120A subharmonic synthesizer for signal processing
• Phase and polarity at the output adjustable and Auto Gain Control
• 24-Bit DA and 24-bit Type IV AD converters provide 110 dB of dynamic response
• Graphical user interface or GUI for fast and safe editing of the parameters
• 2 XLR inputs and 6 XLR outputs
• Format: 19", 1U

• Measurement microphone

The MM-1 is an omnidirectional Measurement microphone with a 1/4" wide, polarised condenser capsule.

• Polar pattern: Omnidirectional
• Frequency range: 20 Hz to 18 kHz
• Output impedance: 200 Ohm
• Max. SPL: 132 dB
• SNR:> 70 dB
• Phantom power: +9 V to +52 V
• Incl. bracket

• Professional microphone cable
• Length: 10 m
• Black Yongsheng XLR plug (made by Neutrik)
• XLR male --> XLR female
• Incl. hook and loop fastener

• Enormously fast suppression of feedback
• 2 Operating modes
• Fixed mode with storable filters and presets
• Live mode for real-time analysis and editing over the complete frequency spectrum
• Extremely narrow notch filters (up to 1/80 of an octave) for differentiated intervention
• 24 Programmable filters per channel
• LED chain for all 24 filters per channel
• LCD Display
• Easy setup
• XLR & Jack input and output per channel
• USB Port for firmware updates
• Internal power supply
• Format: 19 "/ 1 HU

• 3-Way stereo
• 4-Way mono
• 40 Hz low-cut filter for both channels
• Phase reverse switch on all outputs
• Factor switches x10
• Internal power supply
• 2 XLR inputs
• 6 XLR outputs
• Format: 19"/ 1U

• 31-Band graphic equaliser
• 8-Band parametric input EQ with auto EQ function
• Limiter
• Crossover
• Compressor
• Subharmonic synthesiser
• Output delay up to 3.4 m/10 ms
• Input delay up to 34 m/100 ms
• Feedback suppressor with 12 notch filters 1/80 octave
• 8-Band parametric output EQ also for speaker tuning
• 1/3 Octave band real time analyser
• Pink noise generator
• Remote control via Mac/Windows/Android/iOS
• 2 XLR inputs
• XLR input with 48 V phantom power for optional measuring microphone
• 6 XLR outputs male
• Ethernet connection
• USB connection
• Format: 19" / 1 U

• 3-Way stereo
• 4-Way mono
• Balanced input and output jacks
• x10 range switch
• Phase reverse switch on all outputs
• 24 dB / octave Linkwitz-Riley Filter
• Mono sub output
• Internal power supply
• Format: 19"/ 1U

• 4 LEDs for output level
• 45mm faders (20 Hz - 20 kHz)
• Balanced jack and XLR in/out
• Switchable ranges +/- 6dB and +/- 15dB
• Format: 19" 3U

• 1x 31-Band
• ± 6/12 dB Input gain
• Output level display
• Switchable bypass
• Clip LED
• 50 Hz low-cut filter 12 dB / octave
• 20 mm faders
• Dynamic range >108 dB
• Control range switchable ± 6 dB or ± 12 dB
• Bal. jack/XLR in/out
• Internal power adapter
• Format: 19" 1U

• For Driverack and other measuring applications
• Ball, electret capsule
• Frequency range: 20 - 20,000 Hz
• Impedance: 250 Ohm
• Sensitivity: -63 dB + 3 dB (0 dB = 1V / microbar 1,000 Hz)
• 9-52 V phantom power required
• Incl. microphone mount and case

• 2-Way stereo or 3-way mono
• Mono sub out
• 24 dB / Octave Linkwitz-Riley filters
• Adjustable input- and LF/HF gain
• Tunable centre frequency
• x10 Range switch
• Phase reverse switch
• Switchable 40 Hz highpass filter
• Balanced XLR in- and outputs
• Format: 19" / 1U
• Internal power supply

• With integrated power supply
• With the patented OverEasy compression technology
• AutoDynamic attack and release controls
• Compressor ratio: 1: 1 to Infinity: 1
• XLR in / outs
• -10 / + 4 db switchable
• Stereo link function
• Design: 19" / 1U

• 2x 31 band Constant Q filters
• 20 mm faders
• ± 12 dB variable input gain
• 4 LEDs output level meter
• Clip LED over modulation indicator
• Inputs and outputs: Balanced XLR / jack
• 50 Hz Low-cut filter 12 dB/octave
• ISO standard (20-20000 Hz)
• Dynamic range: >108 dB
• Frequency Response: 50 kHz
• Control range can be switched to ± 6 or ± 12dB
• Bypass capability
• Internal power adapter
• Format: 19" 2 U
• Weight: 2.73 kg

• Studio / Live microphone preamp
• 48V Phantom power, de-esser, enhancer, compressor and expander gate
• Design: 19", 1U

• Remote control via own network with Mac, iOS, Android or Windows devices
• 3 Inputs: Analogue or AES
• 6 Outputs
• RTA microphone connector on the front
• Auto EQ function with external RTA measuring microphone
• AFS Feedback Eliminator
• Input module with 31-band graphical EQ, 12-band parametric EQ, subharmonic synthesis, delay and noise gate
• Output module with crossover for up to 6-way mono, 12-band auto-EQs, dbx compressors, automatic gain control, subharmonic synthesiser, noise gate, delay (up to 1000 ms per output) and alignment delay
• XLR input and output
• Ethernet port
• USB port
• LED chain for each input and output
• Body shape: 19"/ 1U
• RTA microphone optional (not included)
• Tested routers: Dlink 636L, Dlink Cloud router 2000, Cisco / Linksys: WRT54G2V1, Netgear WGR614 v7, Netgear WNR 1000