Diginoiz Software

Distortion Filter

Distiller – a distortion filter from Diginoiz! Since gain of some early guitar amp was cranked up for the first time, distortion became an acknowledged tool for enhancing sound. And when a filter was added to an early subtractive synth, filtering became an indispensable way of carving timbre.

Distiller equally focuses on these two pillars of sound creation as it combines over dozen types of distortion and a wide selection of filters. What makes it special and modern is the possibility to blend between two types of distortion and the fact that both the filter cutoff and the blend between distortion types can be controlled by separate LFOs.

From removing unwanted frequencies to adding rich harmonics, from classic saturation to experimental wavetable distortion, from lo fi textures creation to contemporary bass sound design – Distiller does it all and much more!

Features

• 29 filter types including one pole and cascade filters, state variable classic filters (which add gain to the passband when slope gets steeper) and state variable precise filters (which don’t add gain to the passband when the slope gets steeper).
• Low-Pass and High-Pass: 6dB 1 Pole, 12dB Cascade, 12 and 24 SVF Classic, 12, 24, 36, and 48 SVF Precise. Band-Pass, Notch and All-Pass: 12 and 24 SVF Classic, 12, 24, 36, and 48 SVF Precise.
• 15 distortion types including Atan Saturation, Soft Distortion, Soft Clip, Hard Clip, Asym Quad, Exp Asym Dist, Exponential Dist, Sine Fold, Sine Power Fold, Sine Atan Fold, Triangle Fold, Voice, Current, Rectify and Bit Reduction.
• Mix knob allowing to set blend between two types of distortion.
• Changeable order of the effects – filter can be set pre or post distortion.
• Two separate LFOs controlling filter cutoff and distortion mix.
• 7 LFO shapes: sine, triangle, square, ramp up, ramp down, random line and S/H..
• In LFOs free mode integers and fractions are adjusted separately with the precision of 0.01 Hz allowing to set the rate accurately.
• In LFOs sync mode the multiplier and multiplicand are adjusted separately from 1 to 64 allowing to set a wide range of standard as well as odd rhythm divisions.
• Filter in bipolar mode covers the whole frequency range.
• Audio-rate modulation goes up to 200 Hz allowing to create extreme effects.
• Q adds up to 37.5 dB of gain.
• LFO modulated all-pass filter paired with distortion allowing to create crisp and sharp sounds or lo fi wobble and flutter.
• Additional output soft clip with adjustable threshold.
• Accurate spectrum view showing input signal and processing.
• Waveshaping and filter curves visuals.
• Resizable interface.
• Settings can be adjusted with the use of mouse, scroll wheel, keyboard arrows or by typing values and all parameters can be reset to default by mouse double-click making workflow convenient.
• Dry/Wet knob allowing for parallel processing.
• DC blocker/DC filter.
• Comes with 30 factory presets and 60 free loops named as the presets and showing the presets’ possible application.
• Bypass button on the interface (useful in some DAWs).
• Apple® M1® CPU supported natively.
• Made with user experience and ease of use in mind by experienced sound designers and music producers.
• More features to be added in updates!

Trap Vst for Deep 808 and Bass Sounds

Trap vst with your new favorite 808 and bass sounds! Perfect for all kinds of music that need some solid sounding bass instrument, ideal for Trap, R&B, Future R&B, Hip-Hop and many other genres!

Perfect drums need a perfect bass to make a perfect song!

SUBDIVINE! An indispensable instrument in the bass – heavy music production process designed especially for those music producers and beatmakers who need solid 808 – type basses in their tunes!

Perfect for Trap, Hip-Hop, R&B and Future R&B, Soul and Neosoul, Pop and any genre that bases on… bass!

SUBDIVINE is a playable library of bass samples with the interface of a synth. It was created by experienced sound designers and music producers to provide efficient workflow and usability combined with the best possible sound with a lot of low end and that stylish 808 flavor.

Presets from SUBDIVINE are divided into two groups:

• Analog – sampled from some of the best analog synths
• Digital – sampled from some great digital instruments. Every preset has its own character and unique sound that can be formed with ADSR envelope and enhanced with Drive.

The Drive! Well, this is where the ride begins! SUBDIVINE’s Drive consists of 7 different types of distortion with different sensitivities, all of them emulations of top quality analog and digital hardware, so the sound can be slightly warmed up or distorted like in the sickest drop humanity ever heard!

Range of SUBDIVINE’s sounds was deliberately narrowed to two octaves in order to keep the library compact and the instrument efficient in providing high quality low end.

Enjoy our trap vst instrument during your creative process – smash hits guaranteed!

Diginoiz are now proud to offer TrapDrive completely free!

Ladies and gentlemen! We are proud to present our new distortion vst plugin dedicated especially to the heavy side of trap music and every genre related to it or drawing from it!

Tough, rough, harsh, possibly even drastic (careful with that knobs!), but at the same time giving your tracks that desirable edge, adding the extra spice, making them stand out in a wild way!

If you get excited by the sounds heard in tunes like Xxxtentacion – Look At Me, Scarlxrd – Heart Attack, Bones – HDMI, to name just a few and need an uncompromising distortion in your productions, this plugin is for you!

Perfect for distorting 808/Bass type sounds, great on vocals, very suitable for crushing guitars and making synths more exciting. And if you feel brave enough you can use it on the whole buses, or even mixes!

Trap Drive has 8 types of distortion you can choose from basing on such operations as arctan function, hard clipping, bipolar exponential, unipolar exponential, bit crushing and some more that only our programmer can denominate, but do you really care about the theory?

Just throw it on a track, turn up the Amount knob up and listen to the sound of violence!

We wish you many exciting moments with this (probably) first distortion dedicated to trap music, we’re sure you’ll love it!

You can use it on your EDM synths and Heavy Metal guitars too! But please do remember about ear care, Trap Drive is indestructible, but your health is!

Hattricks is a VST for trap that you subconsciously know you need badly, and you’ll realize it once you see how it works!

Hattricks is a vst for trap hi hats creation that makes the process smooth, easy and proficient.

Main Features:

• 12 Rhythm divisions
• 2 5 Articulations
• 2 Octaves of keys retuning the sample  
• 898 Samples including:
• 853 Hi hat samples
• 20 Snare samples
• 5 Kick samples
• 5 Shaker samples
• 15 Tonal samples
• Possibility to upload samples
• Dice button for choosing random sample   
• Tuning and fine tuning sliders
• Low pass/hi pass filter
• Start/end sample markers
• AHD envelope
• Zoom with three types of controls
• Mono/poly modes
• Patterns display
• Pitch and modwheel for additional modulation

In technical terms it is a sampler and a sequencer with rhythm divisions assigned to keys.

In practice you just press a key and it plays a pre programmed looped rhythm division, for example you press D3 and it plays 1/4 notes, E3 plays 1/8 notes and so on up to those 1/128 rolls that are on the brink of one’s perception. Of course it has triplets too!

All that lets you record those otherwise unplayable hi hat parts in real time, or if you’d rather program them, getting a groove will only require a few clicks and not a hundred.

Imagine how much of your time and creative energy it will save you!

If you decide that you want to change the sound after laying down the part you can choose a sample from Hattricks’ huge library, or drag a favorite sample of your own. If then you feel the need to refine it you can change its length, retune it, filter it with a low pass and high pass filters and adjust its attack, decay and release times.

No VST for trap hi hats would be comprehensive if it couldn’t let you retune selected parts of your sequence and let you make those characteristic tuned rolls.

You can do it in two ways:

By using a pitch wheel, or if you want some precisie tuning by using a keyboard. The keys from C1 upwards would retune the sound’s pitch upwards in half steps when pressed, and consequently the keys from C1 downwards would retune the sound’s pitch down in half steps.

But what if you loaded a snare sample into Hattricks? Then you would turn it into a vst for trap snare drum rolls! Then apart from the Divisions section the Articulations section becomes handy, since it has a pre programmed drum rudiments such as flam, drag, ruff, buzz and roll coming in two speeds and allowing for nice and quick drum fills creation.

And what if you loaded a tonal sample into Hattricks?!?
Well, then you would turn the plugin into a sort of vst for trap melodies with which you first make a rhythm sequence and then can play with the notes’ pitch.

And what will happen if you’ll load a kick sample into Hattricks?!?!
In such circumstances you’ll enter a highway to hell by changing it from a vst for trap hi-hats into a vst for making a heavy metal bass drum passages, but hey, isn’t that a bit over the edge?

Enjoy our plugin, you can use it for Trap, RNB, Pop, EDM, or for any genre you want, including Heavy Metal, if that’s what you fancy!

With the Hattricks you will receive a huge library of 853 hi hats samples and 45 bonus drum samples which overall gives you almost 900 top-quality sounds ready to use and create!