DSM & Humboldt

• Preamp and speaker simulator
• Can be connected directly to an FOH or recording mixer
• Fully analog pre-amp based on the Ampeg SVT with gain, level and 3-band EQ with semi-parametric center control
• Parallel signal routing with selectable LPF
• Dual FX loop (for preamp and parallel signal)
• Analog cabinet simulation with 3 voicings: 8 x 10", 1 x 15" & 4 x 10" with microphone position and resonance controls
• Controls: Gain, Volume, Preamp Blend, Bass, Mid, High, Mic Position, Resonance, Cabsim Blend, Phones Level
• Mid Freq switch: 900/400/1500 Hz
• Switch parallel LPF: 100 / Off / 500 Hz
• Switch Cab Size: 4x 10"/ 8x 10" / 1x 15"
• Speaker Colour switch: Bright / Modern / Warm
• Switch for parallel phase and ground lift
• LED: On
• Input: 6.3 mm jack
• Thru / Out: 6.3 mm jack
• DI Parallel: XLR
• DI Out: XLR
• Preamp FX Send & Return: 2 x 6.3 mm jack
• Parallel FX Send & Return: 2 x 6.3 mm jack
• Aux in: 3.5 mm stereo jack
• Phones: 3.5 mm stereo jack
• Power supply connection: barrel connector 5.5 x 2.1 mm, negative polarity inside
• Current consumption: 80 mA
• Power supply via 9 V DC power supply (not included - suitable power supply: Art.409939)
• Dimensions (W x D x H): 115 x 65 x 55 mm
• Weight: 430 g
• Made in Chile

Note: Battery operation is not supported.

• Controls: Level, compression, dry/wet blend, release, attack, ratio
• Switch: Threshold; high, low, mid
• LED: Effect on
• Footswitch: Effect bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside
• Power consumption: 100 mA
• Power supply with a 9 V DC mains adapter is not included in the delivery
• Suitable optional power supply unit: Article no. 409939
• True bypass
• Dimensions (W x D x H): 65 x 120 x 57 mm
• Weight: 380 g

Note: Battery operation is not supported

• Preamp, power amp and cabinet simulator
• Fully analogue 0 watt two-channel amplifier
• With cabinet simulator, multi-stage reverb and versatile connection options - all in an extremely small format
• 2 Studio-quality preamps
• Each channel offers: 3 preamp types & 3 gain modes
• Channel A is ideal for aggressive and expressive playing
• Channel B is perfect for clean, blues crunch to rock rhythm guitar
• Includes a full stereo reverb with 3 modes and independent mix control for each channel
• Controls: Gain L&R, Volume L&R, Bass L&R, Mid L&R, Treble L&R, Presence L&R, Resonance L&R, Mic Position L&R, Reverb Mix L&R, Phones Level
• Switches: Input Mode, Mode L&R, Pre-Amp Voicing L&R, Cab Voicing L&R, Spread, Ground Lift, Cabsim
• LED: On
• Input: 6.3 mm stereo jack - Tip: A/B, Ring: B
• Thru: 6.3 mm stereo jack - Tip: A/B, Ring: B
• Output L & R: 2x XLR & 2x 6.3 mm jack
• FX Send: 6.3 mm jack
• Send: 6.3 mm stereo jack - Tip: A/B, Ring: B
• Return L&R: 2x 6.3 mm jack
• Aux input: 3.5 mm stereo jack
• Headphone jack: 3.5 mm stereo jack
• Footswitch connection: 6.3 mm stereo jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside
• Power consumption: 150 mA
• Power supply via 9 V DC mains adapter (not included in delivery, suitable mains adapter: Art. 409939)
• Dimensions (W x D x H): 128 x 95 x 45 mm
• Weight: 490 g
• Handmade in Chile

Note: No battery operation possible