EarthQuaker Devices

EarthQuaker Devices Astral Destiny Octave Reverb; octave reverb effects pedal, W-Music Distribution Special Edition, 8 selectable reverb modes (Abyss, Shimmer, Sub, Sub Shimmer, Astral, Ascend, Descend, Cosmos), 8 completely customizable presets, assignable expression or CV control for all parameters, adjustable modulation, innovative Stretch feature doubles the reverb length while adding an adjustable pitch bending effect, buffered bypass with switchable tails or no tails operation, all analog dry signal path, artwork from world-renowned Marvel comic book artist Matt Horak, controls for Length, Depth, Rate, Tone, Mix, 8-way rotary switch to select the presets, 8-way rotary switch to select the reverb modes, bypass footswitch, Stretch footswitch, status LEDs, metal housing, 6.3 mm mono in / output jacks, 6.3 mm expression pedal input, power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center, battery operation not supported, current draw 85 mA, dimensions (L x W x H) 118 x 92 x 57 mm / 4.65" x 3.65" x 2.25", weight ca. 450 g

• Vintage germanium fuzz
• True to the original replica of the original Park Fuzz sound, developed in collaboration with Park amplifiers
• NOS Germanium transistors
• True bypass
• Controls for volume, treble/bass, fuzz
• Bypass foot pedal
• Status LED
• Metal housing
• 6.3 mm Mono jack in/output
• Powered via 9 V battery or 9 V power adapter with 2.1 x 5.5 mm AC adapter, negative polarity inside (not included)
• Current consumption: 3 mA
• Dimensions (L x W x H): 121 x 64 x 57 mm
• Weight: Approx. 350 g

Note: Register your product at https://shop.warwick.de/en/warrantyregistration to extend the warranty to 4 years.

• Boost / Medium-Gain Overdrive
• Gives the signal extra grit and a rich boost without changing the tone
• Ppreserves the natural nuances and character of the amp
• Exceptionally dynamic response to the guitar's volume control
• Flexible tone control offers full control over the treble range for excellent sound shaping and perfect clarity
• Mode toggle switch selects between two different clipping settings: Germanium / Silicon
• Germanium mode offers a smoother, rounder response with more subtle highs and less output
• Silicon mode offers a 'brighter', more modern response with higher output
• Completely analogue signal path
• Controls for Level, Tone, More
• Mode toggle switch for: Germanium / Silicon
• Bypass footswitch - noiseless relay-based soft-touch circuit functions as latching and momentary switch (Flexi-Switch Technology)
• Status LED
• True Bypass
• Metal housing
• Input: 6.3 mm mono jack
• Output: 6.3 mm mono jack
• Power supply connection: Barrel connector 2.1 x 5.5 mm (negative polarity inside)
• Power supply via 9 - 18 V DC mains adapter (not included in delivery)
• Power consumption: 15 mA
• Dimensions (L x W x H): 121 x 64 x 57 mm
• Weight: 425 g

Note: Battery operation not supported

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

Bundle offer comprising

• Effect Pedal for Electric Guitar
• Chorus
• Analog / digital hybrid circuit
• Harmonizes perfectly with distortion pedals
• An additional LED indicates the LFO speed, also in the bypass
• Controls for Shape, Rate, Depth, Intensity, Dimension and Animate
• True Bypass
• Bypass footswitch
• Noise-free soft-touch switching
• Status LED
• Metal housing
• 6.3 mm mono jack input and output
• Power supply via 9 V DC power supply (2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included), battery operation is not supported
• Dimensions (L x W x H): 117 x 64 x 57 mm
• Power consumption: 50 mA
• Handmade in USA

• Protective Cover
• Suitable for EarthQuaker Devices, Seymour Duncan, and many more pedals with standard housing size
• Suitable for most effect pedals with a housing size around 122 x 67 x 40 mm
• With pedal plate for mounting on Rockboard pedal boards with click system
• Offset of QuickMount mounting holes (W x D): 57 - 59 x 110 - 112 mm / 59 x 89 mm
• Protects effect pedals from dirt and weather conditions
• Protects the settings from unintentionally shifting
• Mounts effect pedals securely on Rockboard boards
• No permanent modifications required
• Includes QuickMount pedal mounting plate type B for RockBoard pedal boards, replacement screws, and shim plate (for lifting the pedal slightly)

EarthQuaker Devices Brain Dead Ghost Echo V3 Reverb LTD, reverb effects pedal, limited to 1 500 pieces, digital, emulates vintage amp-style spring reverbs, 30 - 150 ms pre-delay, controls for Depth, Dwell and Attack, analog dry path, true bypass, bypass footswitch, silent relay-based soft touch switching, status LED, metal housing, 6.3 mm mono IN/OUT jacks, power supply optional 9V DC adapter 2.1 mm x 5.5 mm barrel plug, polarity (-) center, battery operation not supported, current draw 86 mA, dimensions (D x W x H) 121 mm x 64 mm x 57 mm, weight: 295 g, hand made in USA.

• Germanium / Silicon Hybrid Fuzz
• Germanium / silicon transistor hybrid circuit
• From dirty amp-style overdrive to monstrous fuzz
• Analogue operation
• True bypass
• Controls for Tone Shift Level and Fuzz
• Bypass footswitch
• Status LED
• Metal housing
• Front-side 6.3 mm mono-jack inputs / outputs
• Power supply with 9 V battery or via 9 V DC power supply (2.1 mm x 5.5 mm power connection, polarity (-) inside, not included)
• Dimensions (L x W x H): 117 x 64 x 57 mm
• Power consumption: 3 mA
• Hand-made in USA

• Chorus
• Analog / digital hybrid circuit
• Harmonizes perfectly with distortion pedals
• An additional LED indicates the LFO speed, also in the bypass
• Controls for Shape, Rate, Depth, Intensity, Dimension and Animate
• True Bypass
• Bypass footswitch
• Noise-free soft-touch switching
• Status LED
• Metal housing
• 6.3 mm mono jack input and output
• Power supply via 9 V DC power supply (2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included), battery operation is not supported
• Dimensions (L x W x H): 117 x 64 x 57 mm
• Power consumption: 50 mA
• Handmade in USA

• Size: 14" x 5.5"
• 8-Ply cherry/eucalyptus hybrid shell
• Nickel hardware
• DW MAG snare strainer
• DW 5P Buttend
• TrueTone snare wires
• TruePitch50 tuning lugs
• TrueHoops
• DW heads Made by Remo USA
• Satin Oil finish
• Colour: Natural

EarthQuaker Devices Hizumitas, fuzz / sustainer effects pedal, designed for Wata, from the legendary Japanese band Boris, faithful sonic recreation of Wata's crushing go-to fuzz: the Elk BM Sustainar, offers loads of heavy distortion and smooth sustain with an underlying grit, excellent response to different pickup types and playing dynamics, unique Tone and Sustain controls greatly impact the distortion's character, offers plenty of output Volume (unity is around 9-10 o'clock, everything above that is set to destroy), all-analog signal path, true bypass (silent relay-based switching), controls for Volume, Sustain, Tone, bypass footswitch, status LED, metal housing, 6.3 mm mono in / output jacks, power supply via optional 9V DC adapter 2.1 mm x 5.5 mm barrel plug, polarity (-) center, battery operation not supported, current draw 10 mA, dimensions (L x W x H) 120.65 x 63.50 x 57.15 mm / 4.75" x 2.50" x 2.25", weight ca. 425 g / 0.94 lbs, made in USA

• Overdrive
• From almost clean boost to bell-like, clinking sound
• Active 2-band EQ with up to 20 dB boost / cut per band
• Bands: 80 Hz and 2 kHz
• Responds to volume and tone control settings of the guitar
• True bypass
• Controls for Level, Drive, Bass and Treble
• Bypass footswitch
• Noiseless relay-based soft-touch circuit
• Status LED
• Metal housing
• 6.3 mm mono jack input and output
• Power supply via 9 V DC power supply (2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included)
• Dimensions (L x W x H): 117 x 64 x 57 mm
• Power consumption: 10 mA
• Handmade in USA

Note: Battery operation is not supported.

• Stereo reverb / delay
• Up to 2 seconds delay time
• Selectable true / trails bypass
• Footswitch works as a latching and momentary switch
• Tap tempo function
• Digital way of working
• Offers a variety of tape and analog delay sounds
• Controls for time, repeats, tone, mix (delay) and mix (reverb)
• 6-Way EXP rotary switch for selecting the expression parameter
• 6-Way ratio rotary switch for selecting the tap-tempo subdivision
• Toggle switch to select the delay / reverb mode (reverse / normal / swell)
• Activate footswitch
• Noiseless relay-based soft-touch circuit
• Tap footswitch
• Status LEDs
• Metal housing
• 2x 6.3 mm mono latches (L / R) inputs / outputs
• 6.3 mm TRS expression input
• Power supply via 9 V DC power supply (2.1 mm x 5.5 mm hollow plug, polarity (-) inside)
• Dimensions (L x W x H): 140 x 120 x 57 mm
• Power consumption: 425 mA
• Includes power supply
• Handmade in USA

Note: Battery operation is not supported.

• 2-channel overdrive / distortion with separate booster
• 6 clipping voices and 5 bandwidth settings
• Separately switchable boost
• True Bypass
• 3 Footswitches for Gain A, B and Boost
• 5 Controls for Boost, Tone, Volume, Gain A and Gain B
• 2 Rotary selector switches for Voice and Bandwidth
• 2 Mini toggles for Normal / Bright and Buffer On / Off
• Completely analog
• Noiseless relay-based soft touch switching
• Bypass footswitch
• Boost footswitch
• Gain B footswitch
• 3 LEDs
• Metal housing
• Input and output 6.3 mm mono jack
• Power supply via 9 V DC power supply unit (2.1 mm x 5.5 mm barrel connector, negative polarity (-) inside, not included), battery operation is not supported
• Dimensions (L x W x H): 117 x 144 x 57 mm
• Power consumption: 30 mA
• Handmade in the USA

• Reverb
• Limited Edition Artwork - black print on a raw silver case
• An atmospheric, spreading, huge and magical reverb sounds
• 9 Selectable modes change the function of the drag control (Unquantized, Unquantized with Slew, Unquantized Volt/Octave, Chromatic Scale, Minor Scale, Major Scale (Lydian), Pentatonic Scale, Octaves & Fifths, Octaves)
• Controls for Input, Dampen, Reflect, Mix, Drag, Mode, Diffuse, Length
• 4x CV attenuators (Drag, Mode, Diffuse, Length)
• Status LED
• Skiff compatible - protrudes less than 31.75 mm (1.25") behind the panel with a power connector installed
• Audio input can handle input signals from instrument level to modular level, depending on the setting of the input control
• Mono jack CV input (Drag, Mode, Diffuse, Length): 4x 3.5 mm
• Mono jack input/output: 3.5 mm
• Mono jacks Reflect Send and Reflect Return: 3.5 mm
• Power supply via a regular Eurorack power connector (10-pin) with a marker to indicate the negative contacts
• Current consumption: 95 mA from the +12V rail, 0 mA from the -12V and +5V rails
• Dimensions: Width 16 HP / maximum depth 31.75 mm
• Made in USA

• Oktave reverb
• 8 Selectable reverb modes: Abyss, Shimmer, Sub, Sub Shimmer, Astral, Ascend, Descend, Cosmos
• 8 Freely editable presets
• Freely assignable expression- or CV control for all control options
• Variable modulation
• Innovative Stretch function doubles the length of the reverb effect and adds an adjustable pitch bending effect
• Buffered bypass with switchable Tails Mode
• Analog dry signal path
• Artwork by well-known Marvel Comics artist Matt Horak
• Controls for: Length, Depth, Rate, Tone, Mix
• 8-Way rotary switch for selecting presets
• 8-Way rotary switch for selecting reverb modes
• Bypass footswitch
• Stretch footswitch
• Status LEDs
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• 6.3 mm Expression pedal input
• Powered via 9 V DC power supply unit (2.1 mm x 5.5 mm, coaxial power connector, negative polarity (-) inside (not included))
• Power consumption: 85 mA
• Metal housing
• Dimensions (L x W x H): 118 x 92 x 57 mm
• Weight: 450 g

Note: Battery operation is not supported.

Note: Register your instrument at www.w-distribution.de/Warranty to extend the warranty to 4 years.

• Reverb
• Atmospheric, spreading magical reverb sounds
• 9 Selectable modes change the function of the drag controller (Unquantized, Unquantized with Slew, Unquantized, Volt / Octave, Chromatic Scale, Minor Scale, Major Scale (Lydian), Pentatonic Scale, Octaves & Fifths, Octaves)
• Tails / No Tails switchable
• With activated tails, the wet signal fades slowly and naturally after the effect is switched off
• Noiseless relay-based soft-touch circuit functions as a latching and momentary switch (Flexi-Switch Technology)
• True bypass
• Controls for Length, Diffuse, Dampen, Reflect, Drag and Mix
• Bypass footswitch
• Status LED
• Metal housing
• 6.3 mm Mono jack input / output
• 6.3 mm Expression pedal input
• Power supply via optional 9 V DC power supply, 2.1 x 5.5 mm barrel connector, polarity (-) inside
• Current consumption 100 mA
• Dimensions (L x W x H): 121 x 64 x 57 mm
• Weight: 400 g

Note: Battery operation not supported

Note: Register your product at https://shop.warwick.de/en/warrantyregistration and extend the guarantee to 4 years.

• Flanger
• True stereo operation possible
• Digital operation
• Fully analogue dry and full digital wet signal path
• 5 User presets
• 8 Flanger Modes: Classic - Through Zero - Barber - Pole Up - Barber Pole Down - Trigger Up - Trigger Down - Step - Random
• Supports side chain flanging
• Positive and negative feedback
• Flexi-Switch footswitch works as a latching and momentary switch
• Tap Tempo function with Tap Tempo subdivisions
• Selectable True / Trails Bypass
• Mix, Width, Rate Manual, Feedback and Modify knobs
• 8-Way mode rotary switch
• 6-Way presets rotary switch
• Rate & Tap Toggle Switch to set Tap Tempo subdivisions (Slow / Normal / Fast)
• Activate footswitch
• Tap footswitch
• Noiseless relay-based soft-touch circuit
• Status LEDs
• metal housing
• 2 x 6.3 mm Mono jacks (L / R) inputs / outputs
• 6.3 mm TRS expression input to control Manual in all modes
• Power supply via 9 V power supply with 2.1 mm x 5.5 mm coaxial connection, polarity (-) inside
• Dimensions (L x W x H): 140 mm x 120 mm x 57 mm
• Power consumption: 425 mA
• Includes power supply
• Handmade in USA

Note: Battery operation is not supported.

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• Power Amp Style Distortion Pedal
• Based on the power amp distortion of the Sunn Amp Vintage Model T
• Severe distortion up to the 'Fuzz'
• Reacts very dynamically
• 1 unlabeled output volume control
• Bypass footswitch
• Noiseless relay-based soft-touch circuit
• Status LED
• Front-side 6.3 mm mono-jack inputs / outputs
• Metal housing
• Power supply via 9 V battery or 9 V power supply (2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included)
• Dimensions (L x W x H): 128 x 66 x 57 mm
• Power consumption 30 mA
• Hand-made in USA