Erica Synths

• Internal compact spring reverb tank
• RCA connections for external spring reverb tank (optional)
• Dry/wet controller
• Controllable feedback via control knob and CV input
• 5 selectable feedback effects
• Integrated vactrol compressor

• Contains 5 independent adapters from 3.5 mm mono jack to 6.3 mm mono jack
• Passive construction - no power supply required
• Width: 8 TE

• Full-featured modular drum machine
• Consists of the following modules: Sample Drum, Bassline, Bass Drum, Snare, Toms, Clap, Hi-Hats D, Cymbals, Modulator, Link, Stereo Mixer, Mixer, Dual FX, Mixer Lite
• Dual Drive and Drum Sequencer
• Drum modules are internally patched to the sequencer for trigger- and accent-signals
• System comes assembled in an Erica Synths Travel Case
• Dimensions: 550 x 280 x 140 mm
• Weight: 7.55 kg
• External power supply included

• Two independent 3-input mixers (also for stereo signal mixing) or 6-input mixers
• Tube overdrive
• 6 Audio inputs
• Power consumption: 160 mA @ + 12 V, 10 mA @ -12 V (Eurorack PSU configuration)
• Dimensions (W x D): 14 HP / 25 mm

• Controls for Tune, Snappy, Noise Tone, Decay, Tune CV and Decay CV
• Manual triggers
• Decay range: 150 - 260 ms
• Audio Output Level: -5 to +5 V
• CV Level: -5 to +5 V
• Accent CV Level: 10 V
• Trigger Level: 5V
• Trigger time: 1 ms
• Connections: Tune CV, Decay CV, Trigger, Accent and Audio Output 3.5mm mini jack
• Power requirement: 37 mA at +12 V, 35 mA at -12 V
• Dimensions (W x D): 10 HP / HP x 35 mm

• Digital oscillator with 32 waveforms
• VCO / LFO mode
• Frequency response in VCO mode: 30 - 5000 Hz
• Frequency response in LFO mode: 0.1 - 20000 Hz
• W-CV input to select the waveforms with control voltages
• Wave morphing in LFO mode
• Width: 3 TE / HP
• Depth: 35 mm
• Electricity requirement: + 26mA (+ 12V) / -4mA (-12V)

• Fully analogous structure
• Plug-in connections can be stored via pluggable voice cards (5x preset cards and 5x DIY cards included)
• Current consumption: 175 mA (+12 V) / 112 mA (-12 V)
• Width: 42 HP

Contains:

• Step sequencer
• 2x VCO
• 2x Mixer
• LFO
• Sample & hold
• Noise & random generator
• 2x function generator
• 2x Low-pass gate
• BBD delay & output section

• Stereo headphone with headphone output
• Stereo input (L/R)
• Signal can be attenuated and boosted up to gain 2
• Width: 3 HP
• Depth: 35 mm
• Power requirement: +20mA (+12V) / -7mA (-12V)

• Digital noise and random generator
• 9 Different noise types (stereo) with adjustable pitch
• Dual CV random generator
• CV Control for all parameters
• Extended functional range in connection with the Black Code Source Expander (not included)
• Output level (noise): -5 V to +5 V (or 0 V to +10 V)
• CV level (random voltage): -10 V to +10 V
• Power consumption: +12 V: 143 mA / -12 V: 64 mA
• Width: 10 TE / HP
• Installation depth: 35 mm

• Distortion Module with Plasma Technology by Gamechanger Audio
• Input Level, Wet / Dry Mix, Voltage and Voltage CV controls
• Treble / bass equalizer
• EQ bypass switch
• Additional overtones via octave up / down switch
• CV Inputs for Voltage and Wet / Dry Mix (3.5 mm)
• Octave and sub-trigger inputs (3.5mm)
• Current consumption: 135 mA (+12 V) / 87 mA (-12 V)
• Width: 16 HP

Erica Synths Black VCO2; Eurorack module; analog VCO with Sawtooth Waveshaper and two modulation LFOs; outputs for sine, triangle, sawtooth, pulse and sub-octave; stable tracking across 8 octaves; modulation LFOs for pulswidth and sawtooth waveshaper; octave switch and manaul controls for fine tune, pulsewidth, FM/PWM CV and sawtooth waveshape; switchable linear or exponential FM input; expandable via Black VCO Expander module (item 420021); power consumption: 71mA (+12V) / 62mA (-12V); width: 12 HP; depth: 35mm

• Combined overdrive and wavefolder
• Controls for drive and gain
• Gain CV input with attenuator
• Drive CV input
• Limiter for signal output
• Current consumption: 29 mA (+12 V) / 29 mA (-12 V)
• Width: 3 HP
• Depth: 35 mm

• Compact two-channel VCA for audio and CV signals
• Per channel: signal and CV input and signal output
• First channel additionally with bias control
• Inputs of channel 1 are normalised to channel 2
• Current requirement: 20 mA (+12 V) / 19 mA (-12 V)
• Width: 3 HP
• Depth: 35 mm

• Vactrol based low pass gate
• Decay and offset adjustable
• Operating mode adjustable between VCA and VCF
• Current consumption: 12 mA (+12 V) / 13 mA (-12 V)
• Width: 3 HP
• Depth: 35 mm

• With 64 samples in 12 bit quality
• Two independent drum voices per module
• USB interface for loading your own samples
• Pitch, decay, volume and a separate trigger input are available for each drum part
• Width: 3 TE / HP
• Depth: 35 mm
• Electricity requirement: + 35mA (+ 12V) / -15mA (-12V)

• Fully analogue construction
• Plug-in connections can be stored via plug-in voice cards (5 x preset cards and 5 x DIY cards included)
• Dimensions (W x D x H): 240 x 140 x 80 mm
• Weight: 950 g
• Includes: 20 patch cables, 1 stackable patch cable, external power supply (12 V DC) and manual

Includes:

• Step sequencer
• 2 x VCO
• 2 x Mixer
• LFO
• Sample & Hold
• Noise & Random generator
• 2 x Function generator
• 2 x Lowpass Gate
• BBD delay & output section

• Drum module with classic digital hi-hat sound
• Signal path from discrete 6-bit DAC and analogue AS3330 VCA
• Adjustable decay for closed and open hi-hat
• Adjustable tuning
• Loop-mode for open hi-hat
• Tune and decay controllable via CV
• Adjustable VCA characteristic
• Trigger button for closed and open hi-hat
• Trigger and accent inputs
• Power consumption: 56 mA (+12 V) / 35 mA (-12 V)
• Width: 10 TE
• Depth: 45 mm

• Compact 3-channel mixer
• Suitable for CV and audio signals
• Volume control per channel
• 1x Input and 1x mix output
• Power requirements: +4 mA (+12 V) / -4 mA (-12 V)
• Width: 3 HP
• Depth: 35 mm