Erica Synths

• 4x Input to 1x Output
• 1x Input to 4 x Output
• Power consumption: +25 mA, -25 mA
• Dimensions (W x D): 4 HP / 25 mm

• Similar circuit design of the Black Polivoks filter with Russian NOS operational amplifiers
• Filter characteristic switchable from lowpass to bandpass
• CV input with attenuator for the cutoff frequency
• Self-oscillating
• Width: 3 TE / HP
• Depth: 35 mm
• Power requirement: +12 mA (+12 V) / -11 mA (-12 V)

• 2-Channel LFO and noise source
• 8 Waveforms which are continuously faded into each other
• Digital noise with adjustable pitch
• High pass / low pass filter for noise available
• 2 Outputs per channel with adjustable phase shift
• Sync input and Rate CV input
• VCA for channel 1
• Link switch for synchronising both LFOs
• Current consumption: 86 mA (+12 V) / 7 mA (-12 V)
• Width: 10 HP
• Depth: 45 mm

• Analog synthesizer voice for bass and lead sounds
• VCO with three waveforms (sawtooth, rectangle, triangle)
• Suboscillator
• Erica Synths Acidbox Filter (Lowpass / Bandpass)
• VCO beats simulated via BBD circuit
• VCA with decay envelope and accent input
• CV input for FM and VCF
• Power requirement: 110 mA (+12 V) / 70 mA (-12 V)
• Width: 14 TE
• Width: 35 mm

• Pre-configured modular system consisting of Erica Synths tube modules
• Contains: 2x Fusion VCO2, Fusion VCF3, Fusion Modulator, Fusion VCA/Waveshaper/Ringmodulator, Fusion Delay/Flanger/Vintage Ensemble
• 104 HP One Row Skiff Case with lid
• Dimensions: approx. 52 x 15 x 11 cm
• Includes external power supply and 20 patch cables

• An analogue two-channel function generator
• Per channel: Controls for attack and decay time, trigger button, switchable loop mode, gate input, CV inputs for attack and decay, outputs for EOC, unipolar and bipolar envelope signal.
• Current consumption: 38 mA (+12 V) / 32 mA (-12 V)
• Width: 10 TE
• Depth: 35 mm

• One of 8 waveforms available on 8 outputs or all 8 waveforms simultaneously on all outputs
• LFO manually and CV controlled
• Manual selection of the phase shift direction
• 8 Simultaneous outputs
• Synchronization to an external clock
• LFO freeze function
• Morphing function
• Two-colour output signal level LEDs
• Power consumption: + 82 mA, -44 mA
• Dimensions (W x D): 12 HP x 25 mm

• Pre-configured modular system consisting of Erica Synths tube modules
• Contains: 2x Fusion VCO2, Fusion VCF3, Fusion Modulator, Fusion VCA/Waveshaper/Ringmodulator
• 84 HP One Row Skiff Case
• Dimensions (W x D x H): 470 x 150 x 110 mm
• Includes external power supply and 20 patch cables

• 2-Channel effect module
• 8 Effects per channel selectable: Mono delay, stereo delay, hi-pass delay, big reverb, saturated reverb, stalker reverb, ripper, dual pitch-shifter
• Per channel: Controls for 2 effect parameters
• Wet / Dry
• Mono input, stereo output and CV input
• Current consumption: 118 mA (+12 V) / 61 mA (-12 V)
• Width: 10 TE
• Depth: 45 mm

• Digital drum module with 8 algorithms
• Algorithms: Pulse Drum, Fold Drum 1, Complex Pulse Drum, Complex Sine Drum, Space Snare, Noise Crush, Fold Drum 2, Slap
• 3 Parameters per algorithm, directly accessible via knobs
• 2 Assignable CV inputs
• CV switching of algorithms possible
• 1V/oct. tuning
• Trigger input
• Audio output
• Current consumption: 28mA (+12V) / 5mA (-12V)
• Width: 3 HP
• Depth: 35 mm

• Delay time adjustable from 1 - 5000 ms
• Up to 50 s delay time via tap tempo or MIDI clock mode
• 5 Delay modes (tape, tape ping pong, digital ping pong, digital, crossover)
• Analogue multimode filter with resonance (low pass, band pass, high pass)
• Adjustable tube overdrive
• Stereo input: 6.3 mm jack
• Stereo output: 6.3 mm jack
• Control input (6.3 mm TRS jack) for optional bypass / TAP foot switch (not included)
• MIDI-in
• Dimensions (W x D x H): 21 x 15 x 5 cm
• Weight: 870 g
• Power supply unit included (12 V DC)

• With aluminium rails
• With painted side panels
• Integrated power supply
• Depth: 2x 84 HP 50 mm
• Dimensions (W x D x H): 461 x 270 x 120 mm

Note: Modules not included.

• Compact envelope follower
• Preamp with up to +40 dB gain - also suitable for dynamic microphones or instruments
• Adjustable threshold for envelope follower
• 3 selectable attack times
• Outputs for envelope follower signal and gate
• Consumption: 25 mA (+12 V) / 15 mA (-12 V)
• Width: 3 TE
• Depth: 35 mm

• Analogue high-pass filter (-24dB/oct.)
• Resonance adjustable up to self-oscillation (with level compensation)
• Adjustable input level and switchable overdrive (post filter)
• CV inputs for cutoff and resonance with attenuator
• Expandable with Black Low-Pass Filter Art.518165 and Black VCF
• Coupler Art.518167 (both not included)
• Current consumption: 25 mA (+12 V) / 29 mA (-12 V)
• Width: 10 HP
• Depth: 35 mm

• Full-featured modular drum machine
• Consists of the following modules: Sample Drum, Bassline, Bass Drum, Snare, Toms, Clap, Hi-Hats D, Cymbals, Modulator, Link, Stereo Mixer, Mixer, Dual FX, Mixer Lite
• Dual Drive and Drum Sequencer
• Drum modules are internally patched to the sequencer for trigger- and accent-signals
• System comes assembled in an Erica Synths Travel Case
• Dimensions: 550 x 280 x 140 mm
• Weight: 7.55 kg
• External power supply included

• Two independent 3-input mixers (also for stereo signal mixing) or 6-input mixers
• Tube overdrive
• 6 Audio inputs
• Power consumption: 160 mA @ + 12 V, 10 mA @ -12 V (Eurorack PSU configuration)
• Dimensions (W x D): 14 HP / 25 mm

• 16-Step-CV- and gate sequencer
• 16 Storage locations
• 9 Sifferent scales
• Adjustable gate length for each step
• Playback modes: forwards, backwards, ping-pong, ping-pong with repeating of the last steps, random
• Octave range: from one up to eight octaves
• Step-Off and Step-Merge function
• Slide function
• Width: 3 HP
• Depth: 35 mm
• Power requirement: +55 mA (+12 V) / -4 mA (-12 V)