HY-Plugins

Simply put, it’s a delay effect. HY-Delay4, designed by HY-Plugins is here to help add delay and multi-fx with an all in one tool.

The plugin contains waveshaper, eq, multip and fx units. You can change these process orders around in any way that suits your current needs.

There are 5 delay modes (simple, dual, grain, groove, pm) and bypass available. If you want to use this plugin without delay, you can use bypass mode.

Also you can modulate those parameters by internal modulation sources. There are 4 modulation units available and each unit has 5 modulation types.

Main Features:

• 5 delay modes + bypass mode
• You can change process order(delay, amp, ws, eq, fx1, fx2)
• Drag&drop for modulation assignment
• 4 modulation generators(5 modulation types)
• Ducker
• Side-chain input for ducker and envelope follower
• Randomizer
• Preset manager (each fx unit also have preset manager)

FX Unit

It’s also a multi effect unit. there are two fx units available, each unit containing 22 effect types.

• Simple Delay
• Ping Pong Delay
• Reverse Delay
• M-Tap Delay
• Haas
• SVF ( State Variable Filter )
• HP/LP
• Formant
• Comb
• Chorus
• Flanger
• Phaser
• Tremelo/Pan
• Freq Shifter
• Pitch Shifter
• Lofi
• Overdrive
• Clipper
• Compressor
• Envelope Shaper
• Gate
• Reverb

It’s a multi-band effect. The plugin split incoming into three frequency bands and process separately.

Each frequency band has 5 multi-effect units (22 effect type).

Main Features:

• 5 effect units per band + master effect
• 10 modulation units (LFO x4, Env Follower x2, Macro x4)
• Drag&drop for modulation assignment
• Drag&drop for fx re-order
• Randomizer
• Preset manager (each fx unit also have preset manager)

You can modulate effect parameters with modulation signal. There are 10 modulation sources available (LFO x4, Env Follower x2, Macro x4)

Signal Flow

Input signal will be split into 3 frequency band and go through 5 effect units then merge into single. After that the signal goes into a master section (master FX > EQ > Limiter).

You can modulate effect parameters with modulation signal. There are 10 modulation sources available (LFO x4, Env Follower x2, Macro x4)

Each effect unit is multi-effect type and 22 effect types are available per unit.

FX Types

• Delay (Simple, Ping Pong, Reverse, M-Tap)
• Hass
• SVF
• HP/LP
• Formant
• Comb
• Chorus
• Flanger
• Phaser
• Tremelo/Pan
• Frequency Shifter
• Pitch Shifter
• Lofi
• Overdrive
• Clipper
• Compressor
• Envelope Shaper
• Gate
• Reverb

This is a multi-mode sequencer plugin.

There are 6 sequencer modes available. (Acid, Dark, M5816, Step16, Hexa, Euclid), as well as 4 modulation signal generators and 8 macro controls available for parameter modulation.

Main Features:

• 6 sequencer engines
• 4 modulation signal generators and 8 macro controls
• Drag & drop modulation assignment
• Midi effect rack with 9 midi effects
• Midi recorder
• Sequencer pattern snapshots
• Resizable interface
• Midi Learn

You can also insert midi effects after the sequencer engine output.

There are 9 midi effects available.

• Octave
• Transpose
• Scale
• Harmonizer
• Velocity
• Note Chance
• Note Echo
• Midi Ctrl
• Midi CC

Finally you export the results as a midi file using the midi recorder.

This is a sampler type plugin. You can load 8 different audio samples & they will be chopped into audio slices.

You can also assign sliced samples to individual grid lanes. Each sampler track also has 16 separate grid lanes.

You will be able to assign up to 16 different slices per track. Each sampler unit is driven by the internal grid sequencer.

Main Features:

• Sample Slicer
• Step sequencer for triggering sliced sample
• File browser
• Groove Editor
• Re-orderable FX Chain
• Pattern chainer
• Re-scalable plugin window
• Randomizer
• Preset manager

With just a few clicks, you can load in and get immediately started slicing up sounds. Browse for your audio files, and once you’ve found the one you want to work in, try out the Auto Slice feature. Otherwise, of course this plugin can be used to Manually Slice up your sounds.

Simple set the size of your auto slices, for example if you wanted to slice your loaded sample into 16, simply set this quantity and let the Sample Slicer take over. But there truly is more to this than just automatically slicing your sounds. You can even assign this process to the step sequencer for trigger control.

And for even more control and depth, you can also control step slicing in the step slice arranger.

This plugin offers so much more however. The Randomizer comes with some incredible features that allow you to really mix up, rotate, duplicate, and set all controls for your Step Parameters at once.

The Groove Editor comes to you with a ton of knobs to help you set the timing shift that occurs in each step. You can make your own swing/shuffle behavior by using this editor. You can also even load up grooves via midi files.

The FX Chain is involved to offer 7 effects that can be ordered and re-ordered to your preference. You can change the order of the FX Chain just by dragging and dropping, it’s very intuitive!

This unique slicer plugin offers so much more than what you can see at face value. Dig deep and discover the depth of HY-Slicer today!

HY-POLY is a Multi-FX Synth. It’s a subtractive type poly phonic synthesizer with midi effects and audio effects.

And many of synth and audio fx parameters can be modulated. You can create a wide variety of synth sound with these midi/audio fx and modulations.

HY-POLY features 3 unique Oscillator Modes, a Dual Multi-mode filter, as well as 24 Modulation Sources, 8 MIDI Effect Units and 25 Sublime Audio FX Units!

Main Features:

• 3 Oscillator Modes
• Dual Multi-mode Filters
• Drag & drop modulation assignment
• 24 Modulation Sources
• 8 Midi Effect Units
• 25 Audio Effect Units
• MIDI Learn
• Preset Browser
• Resizable Interface

HY-POLY offers a collection of great MIDI FX designed to give you control over your sounds.

8 MIDI FX:

• Octave
• Transpose
• Harmonizer
• Scale
• Velocity
• Note Chance
• Note Echo FX
• Arpeggiator

Interested in one of the many Audio FX provided with HY-POLY? Look no further. This plugin has covered all the bases.

AUDIO FX:

• Simple Delay
• Reverse Delay
• Mod Delay
• Grain Delay
• Lofi Delay
• SVF
• Formant Filter
• 3Band EQ
• Comb Filter
• Dual Comb Filter effect
• Chorus
• Flanger
• Phaser
• Tremolo/Panner
• Frequency Shifter
• Gain Shifter
• Lofi
• Clipper
• Over Drive/ Distortion
• Compressor
• Gate
• Envelope Shaper
• Reverb
• Utility
• Oscilloscope

HY-SEQ32 is a Midi Sequencer

FEATURING:

• Pitch Sequencer
• Param Sequencer
• CC Sequencer
• CC Rack
• Modulation FX
  • LFO
  • Sample & Hold unit
  • Probability Based LFO

Pitch SEQ

This is a 32 step sequencer for generating Midi note messages. You can use up to 4 Pitch SEQ units at the same time.

Each unit can run independently, so it is possible to set run speed, directions, step size and etc, individually.

You can make 8 parameter setting snapshots. Featuring a randomize function!

Param SEQ

This is a sequencer for controlling Pitch SEQ parameters. You can assign different target parameter per step

CC SEQ

This is a sequencer for generating Midi control change messages.

CC Rack

This is a unit which contains 8 CC knobs. Each knob can control individual CC target.

OCT/TP SEQ

This sequencer controls the master octave/transpose values

MODULATION

Each SEQ/Rack unit has 8 exclusive modulation units.

Each modulation unit contains 3 types of modulation signal generator(LFO, Sample&Hold and Probability LFO). You can use one of these types at the same time per a modulatio

More Effects:

• Swing
• Octave/Tranpose
• SEQ ReStart/ReSync
• Chord FX
• Scale FX
• MIDI Recorder
• Snapshot Chainer

CHORD FX

The chord effect is a Midi effect that converting incoming note into a chord.

The brilliant team behind HY-Plugins is back with their next product. HY-MPS2.

It’s a block based step sequencer. There are 8 step sequencer blocks available, and those sequencer blocks are controlled by a block chainer.

The Block chainer triggers sequence blocks in any order. This is the core of this plugin.

Main Features:

• 8 sequencer blocks
• 4 modulation units
• 5 modulation engines
• Re-scalable plugin window
• Randomizer
• Preset manager

There are 4 modulation units available, each unit has 5 different modulation engines.

• LFO
• Prob LFO
• Step LFO
• Multipoint Envelope
• Sample & Hold

You can modulate internal sequencer parameter; and control external midi parameter by these modulation units.

HY-RPE2 is a MIDI Sequencer.

FEATURING:

• 2 Sequencer Engines
• Grid Sequencer
• Euclidean Sequencer
• MIDI Learn
• MIDI Recorder function

RPE2 has 2 different sequencer engines, Grid and Euclidean

Euclidean Sequencer

This an 8 track Euclidean Sequencer. You can set the step size, pulse, rotation, running speed, velocity, gate and probability per sequencer unit. And you also can modulate these parameters by LFO/Sample&Hold and Macro controllers.

CHORD MODE

When turning on the Chord Mode button, the track will enter Chord Mode.

In Chord Mode you can access:

• Chord Editor – Edit notes
• Chord Generator – Generate chord notes with the press of one button
• Chord Shifting – Shift the chords up and down octaves with ease
• Trigger 5 notes at once

Grid Sequencer

This is an 8 track Grid Sequencer. Each track contains 8 grid blocks.

Playback order of the grid blocks will be controlled by the block chainer unit.

Block Chainer
Block chainer is a sequencer for controlling the playback chain order of grid blocks. There are 8 block chainer units available.

Grid Sequencer Features:

• Playback Speed Adjustment
• Step Size Adjustment
• Create 8 Pattern snapshots per track
• Randomize Step states

Step Slider:
You can set Velocity, Gate, Probability, Timing Shift, and Roll Count per step.

MIDI RECORDER
You can record the sequencer output and create MIDI files with the MIDI recorder. After recording, you can drag & drop the resulting MIDI file to your host MIDI/instrument track.

HY-Filter4 is a semi-modular type effect plugin.

It contains multi-engine filter + built-in 38 effect units + 10 types of modulators + the CTRL SEQ. You can modulate parameters of the main filter, bult-in effects and modulators by using the modulation units.

In addition, these are controlled by the CTRL SEQ which is a grid sequencer

The plugin consists of 3 parts.

• FX Chain: Processes the input signal
• Modulator: Modulates the FX/Modulator parameters
• CTRL SEQ: Controls the FX/Modulator unit

FX CHAIN

Modulator

CTRL SEQ

CTRL SEQ

The CTRL SEQ has 16 tracks and 12 pattern snapshots.

These tracks will be assigned to effect/modulation units.

Once a CTRL SEQ track is assigned to a Modulator/FX unit, that unit will be under the control of the CTRL SEQ

Main Features:

• Multi-engine filter
• 38 built-in effect units
• 10 types of modulator (total 42 units)
• Built-in grid sequencer (CTRL SEQ) for controlling effect and modulator units
• Drag and drop modulation assignment