IMG Stageline

• Small, light and handy
• Compact and flat full-range system
• 2x 4" Full-range speakers with neodymium magnets
• 200W Class D amplifier system
• Maximum sound pressure level: 116 dB
• Volume and tone control
• Balanced XLR / 6.3 mm combo line or mic input
• XLR link output
• Multi-plex wooden housing with metal protective grille
• 2 x M10 and 2 x M6 threaded inserts for tripod adapter or mounting bracket
• Includes clamp for mounting e.g. on a microphone stand
• Frequency range 90 - 20,000 Hz
• Dimensions (W x H x D): 265 x 120 x 192.5 mm
• Weight: 2.5 kg
• Optional suitable transport bag: Art.479484 (not included)

• For the reduction of signal disturbances and hum loops
• 2 Inputs via balanced XLR/6.3 mm jack (600 Ohm) combo jacks
• 2 Galvanically isolated XLR outputs (600 Ohm) with ground lift switch
• Shielded metal housing
• Frequency range: 20 - 20,000 Hz
• Dimensions (W x H x D): 125 x 55 x 75 mm
• Weight: 650 g

• For signal transmission from musical instruments to mixing console or amplifier
• Disturbances such as humming loops are avoided by transformer coupling.
• Galvanically isolated input and output
• 3-Way attenuator switch (0/-20/-40 dB)
• Ground lift switch
• Instrument loop-through output
• Broadband balancing transformer
• Frequency range: 15 - 30,000 Hz
• Input impedance: 50 kOhm
• Output impedance: 600 Ohm (symm.), 50 kOhm (asymm.)
• Gain: 0/-20/-40 dB
• Gear ratio: 10:1
• Inputs: 1 x 6.3 mm Jack, asymmetrical
• Outputs: 1 x 6.3 mm Jack, asymmetricral, parallel out XLR, asymmetric
• Metal housing
• Dimensions (W x H x D): 74 x 45 x 130 mm
• Weight: 0.56 kg

• Can also be used as a small power amplifier for 4-8 Ohm speaker systems
• Stereo RCA input
• 6.3 mm stereo jack output
• Volume and balance controls
• Metal housing
• Frequency range: 19 - 40,000 Hz
• Input signal: 110 mV - 4 V
• Output signals: 2x 525 mW / 2x 1500 mW / 4 Ohm, 2x 330 mW / 2x 750 mW / 8 Ohm, 2x 114 mW / 2x 200 mW / 32 Ohm
• Signal to noise ratio: 69 dB
• Distortion factor 1%
• Power supply via enclosed plug-in power supply
• Dimensions: 120 x 68 x 36 mm
• Weight: 288 g

IMG Stageline Flat-M8 - Active 2-way stage monitor, compact and flat full-range system, 8" woofer, 1" coaxial tweeter, 300 W Class-D amplifier system, coverage angle (H x V): 70 x 50°, frequency range: 70 Hz - 20 kHz, max. sound pressure 122 dB. sound pressure 122 dB, volume and 3-way tone control, protect, limiter, signal and power-on display, 1x balanced XLR/6.3 mm combi line or mic input, 1x XLR link output, 1x asymmetrical XLR/6.3 mm combi line or mic input, 1x asymmetrical cinch L/R input, 1x 6.3mm jack aux input, multiplex wooden cabinet with metal protection grille, 2 x M10 threaded inserts for stand adapter or mounting bracket, dimensions (W x H x D): 375 x 185 x 330 mm, weight 7.3 kg, colour: black, matching bag: art. 552273 (not included in delivery)

• Suitable for the IMG Stageline FLAT-M200
• Partially padded nylon version
• With zipper, handle, rubber feet, and side cable pocket
• Dimensions: 330 x 160 x 260 mm
• Weight: 280 g
• Colour: Black

• Suitable for the IMG Stageline FLAT-M100
• Partially padded nylon version
• With zipper, handle, rubber feet, and side cable pocket
• Dimensions: 230 x 280 x 135 mm
• Weight: 188 g
• Colour: Black

• For signal transmission from musical instruments to mixing console or amplifier
• Disturbances such as humming loops are avoided by transformer coupling
• Galvanically isolated inputs and outputs
• 3-Way attenuator switch (0/-20/-40 dB)
• Ground lift switch
• Instrument loop-through output
• Broadband balancing transformer
• Frequency range: 15-30000 Hz
• Input impedance: 50 kOhm
• Output impedance: 600 Ohm (symm.), 50 kOhm (asymm.)
• Gain: 0/-20/-40 dB
• Gear ratio: 10:1
• Inputs: 2 x 6.3 mm Jack, asymmetrical
• Outputs: 2 x 6.3 mm Jack, asymmetrical, 2 x parallel out XLR, balanced
• Metal housing
• Dimensions (W x H x D): 148 x 50 x 130 mm
• Weight: 0.76 kg

• Frequency range: 20-20.000 Hz
• 11-Step amplification from 20 - 70 dB
• Peak-LED
• Phantom power +24 V switchable
• Microphone phase, switchable
• Low-Cut: 15-240 Hz, continuously adjustable
• Inputs: 2x XLR balanced
• Outputs: 2x XLR, 2x Cinch
• Dimensions: 116 x 55 x 135 mm
• Weight: 0,980 kg
• Incl. mains adapter

• Microphones in short design
• Supplied in a practical plastic case
• Case dimensions: 430 x 135 x 320 mm
• Weight: 1.5 kg
• Includes microphone holder with 16 mm stand thread (5/8") and 9 mm adapter screw (3/8") for each microphone and additional shell clamps for the snare/tomtom microphones

1 Dynamic bass drum microphone:

• Polar pattern: Bidirectional
• Frequency range: 50 - 10,000 Hz
• Nominal impedance: 200 Ohm
• Max. sound pressure: 158 dB
• Dimensions (Ø x L): 50 x 113 mm

4 Dynamic snare/tomtom microphones:

• Polar pattern: Supercardioid
• Frequency range: 50 - 15,000 Hz
• Nominal impedance: 200 Ohm
• Max. sound pressure: 157 dB
• Dimensions (Ø x L): 40 x 93 mm

2 Condenser overhead microphones:

• Polar pattern: Cardioid
• Frequency range: 50 - 15,000 Hz
• Nominal impedance: 200 Ohm
• Max. sound pressure: 161 dB
• Dimensions (Ø x L): 22 x 90 mm

Note: Requires 48 V phantom power.

• Galvanically isolated output with ground lift switch and loop-through output
• XLR connectors (600 Ohm) for input and output
• Frequency range: 35-30000 Hz
• Dimensions: 100 x 80 x 40 mm
• Weight: 310 g

• Passive operation - no power supply required
• 3 x 6.3 mm jack mono microphone inputs with separate level controls
• 6.3 mm Jack socket mono output via 3 m connection cable
• Dimensions (W x H x D): 127 x 48 x 72 mm
• Weight: 255 g

• Small, light and handy
• Compact and flat full-range system
• 4 x 4" Full-range speaker with neodymium magnets
• 300W Class D amplifier system
• Frequency range: 70 - 20,000 Hz
• Maximum sound pressure level: 122 dB
• Volume and tone control
• Balanced XLR/6.3 mm combo line or mic input
• XLR link output
• Multiplex wooden housing with metal protective grille
• 2x M10 and 2 x M6 threaded inserts for tripod adapter or mounting bracket
• Dimensions (W x H x D): 320 x 150 x 250 mm
• Weight: 4.11 kg
• Includes clamp for mounting e.g. on a microphone stand
• Matching bag: Art.498215 (not included in delivery)

• For connection to the aux or line input of a hi-fi system, a mixing console or an amplifier, etc
• Low hum through metal housing and enclosed plug-in power supply
• Input 5 mV / 47 k ohms
• Output 450 mV / 100 k ohms
• Frequency range 20-20 000 Hz
• Signal-to-noise ratio> 50 dB
• Power supply 230 V ~ / 50 Hz / 5 VA via the included plug-in power supply
• Dimensions 67 x 37 x 121 mm
• Weight: 365 g

• Power supply or battery operation
• 1x Balanced XLR input
• 11-Stage amplification of 20-70dB
• Peak LED
• Phantom power +24 V switchable
• Microphone phase position switchable
• Lo-Cut 100 Hz, Hi-Cut 12 kHz, 12 dB/Oct. switchable
• Lo-Cut 100 Hz, Hi-Cut 12 kHz, 12 dB/Oct. switchable
• 1 Stereo line input
• 1 Stereo line output
• Level control and panorama control for mixing the microphone signal to the stereo line channel
• Frequency range: 20-20000 Hz
• Input sensitivity: 0.3-150 mV switchable
• Input Impedance: 2.2 Ohm (Mic), 10 kOhm (Line)
• Output signal: 1-12 V (line, balanced), 1-6 V (line, stereo)
• Output impedance: 100 Ohm
• Gain: 20-70 dB (Mic) 0 db (Line)
• Crossover frequency: 100 Hz/-3 dB, 12 dB/oct. (low cut), 12 kHz/-3 dB, 12 dB/oct. (high cut)
• Low Cut 100 Hz
• Signal-to-noise ratio > 66 dB, unweighted (Mic), 80 dB, unweighted (Line)
• Distortion factor
• Power supply via plug-in power supply unit or alternatively 4 x 9 V block
• Inputs: 1x XLR (Mic), 1x RCA L/R (Line)
• Outputs: 1x XLR (Preamp), 1x RCA L/R (Line)
• Dimensions: 116 x 55 x 125 mm
• Weight: 978 g
• Includes power supply