Intellijel Designs

• Force sense resistor
• Pressure-sensitive pad for generating manual CV and gate signals
• Power requirement: 24mA (+ 12V) / 9mA (-12V)
• Width: 10 HP
• Depth: 23mm

• 8-Way octave switch for quick setting of the mood
• Switchable between VCO and LFO mode
• Frequency range VCO mode: 1 Hz to 24 kHz
• Frequency range LFO mode: 0.01 Hz (100 seconds) to 240 Hz
• Pulse width control with attenuator
• Waveforms: sine, triangle, zigzag, sawtooth, pulse and sub-oscillator
• 2 FM inputs - the FM1 input provides an attenuator and can be switched between exponential and linear mode
• Width: 8 HP
• Depth: 40 mm
• Power requirement: +70 mA (+12 V) / -60 mA (-12 V)

• For connection with Palette Case, 7U Case (only with 7U Audio Jacks Board V2) or the "Stereo Line In Jacks 1U" module
• Balanced stereo input (+4dBu)
• Volume controls for left and right
• Signal LEDs
• Left input normalised to right input for mono signals
• Consumption: 18 mA (+12V) / 12 mA (-12V)
• Width: 12 TE
• Depth: 38 mm

• 96 kHz / 24 Bit (32 bit internal) signal processing
• Many parameters can be controlled via external control voltages directly or via the two auxiliary modulation inputs (MODA, MODB)
• 128 Presets and 128 user memory slots
• Preset download and upload via built-in USB-MIDI interface
• Audio processors per tap: Resonance multimode filter 2
• Order (LP, BP, HP) with adjustable cut-off frequency and resonance, level and balance adjustment
• ±(pre-filter) or the sum of all 16 taps (post-filter)
• Feedback provides own granular pitch shifter and filters
• Dealy times from 0.1 milliseconds to 20 seconds adjustable
• Comb resonator: Up to 64 taps can be used with 16 different spacing patterns
• Width: 36 TE / HP
• Depth: 44 mm
• Power requirement: +270 mA (+12 V) / -24 mA (-12 V)

• 2-Channel quantizer and sequencer
• Quantize any CV signals to a user-programmable tone scale
• Quantization can be synchronized via trigger input
• Two outputs A & B enable the formation of harmonic intervals - controllable via the shift input
• Step-sequencer with up to 128 steps
• Memory for 35 patterns
• Sequencer can be synchronized to Quantizer events
• Width: 8 TE

• To connect with Palette Case, 7U Case (only with 7U Audio Jacks Board V2) or the "Stereo Out Jacks 1U" module
• Balanced stereo output (+4dBu)
• Volume control
• Signal LEDs
• Left input normalized to right input for mono signals
• Current consumption: 19 mA (+12V) / 12 mA (-12V)
• Width: 8 TE
• Depth: 29 mm

• Two-track multi-stage sequencer
• Master sequence with 8 pitch steps and per step adjustable pulse count (1-8) and gate mode (hold, repeat, single, rest)
• Tracks 1 and 2 are derivatives of the master sequence and can be modified in many ways
• Adjustable parameters per track: Running direction, length, clock division, swing, slide time, gate length, note range, transposition and more.
• 8 Modulation tracks that can be routed to the two assignable outputs A & B or to internal sequencer parameters
• 3 Assignable CV inputs with attenuators for modulating sequencer parameters
• Memory for 64 presets
• Two assignable knobs
• Clock input and output
• Reset input
• CV/gate outputs for tracks 1 & 2
• Expandable by 8 additional gate/trigger outputs via optional Intellijel Gx or Qx module
• Current consumption: 95 mA (+12 V) / 10 mA (-12 V)
• Width: 34 HP
• Depth: 25 mm

• Combination of four S & H stages, sequential gate and sequencer controller
• Voice allocate mode: From monophonic melodies pseudo-polyphonic sequences can be generated
• Shift Register Mode: To create chords - each newly received gate input causes the current CV value to shift one channel further
• Manual reset button and socket
• Gate input can be switched between sample-and-hold or track-and-hold
• Width: 6 TE / HP
• Depth: 40 mm
• Electricity requirement: +49 mA (+12 V) / -4 mA (-12 V)

• 2-Channel digital oscilloscope, frequency counter and tuner
• Single, Dual and X-Y modes
• Time axis adjustable from 10 μs - 10 s (10 microseconds to 10 seconds)
• Voltage range adjustable from 0.5 V - 10 V
• Hold mode
• Developed in collaboration with vpme.de
• Current consumption: 8 mA (+12 V) / 0 mA (-12 V)
• Width: 16 HP
• Depth: 26 mm

• Dual 3: 1/6: 1 Unity Gain Mixer
• Dual 3: 1 audio and CV mixer
• Output of the upper mixer is normalized to the lower mixer
• Input signals are neither amplified nor attenuated
• Width: 2 HP
• Depth: 29 mm
• Power requirement: +11 mA (+12 V) / -14 mA (-12 V)

• 28 Slots for Eurorack modules
• Power supply unit: +12 V / 3000 mA, -12 V / 3000 mA, +5 V / 1500 mA
• External dimensions (W x H x D): 312 x 165 x 546 mm
• Internal dimensions: 3x 104 HP width, 2x 3 HU height, 1x 1 U
• Inner depth for modules: 70 mm
• Weight: 3.8 kg

Connectors on the back:

• 2x 6.3 mm jack input
• 2x 6.3 mm jack output
• MIDI In, Out, and Thru connectors
• USB port

• Colour: Stealth Black
• Connectors are located on the rear of the case
• 2x 6.3 mm Jack input
• 2x 6.3 mm Jack output
• MIDI input, output and thru connections
• USB port
• 28 Slots for Eurorack modules
• Power supply: +12V / 3000 mA, 12V / 3000 mA, + 5V / 1500 mA
• External dimensions (W x H x D): 312 x 165 x 546 mm
• Internal dimensions: width: 3x 104 HP, height: 2x 3U, 1x 1U
• Internal depth for modules: 70 mm
• Weight: 3.8 kg

• Two-channel attenuator, inverter, multiplier, attenuverter, mixer, and DC voltage source
• Current draw: 12 mA (+12 V) / 10 mA (-12 V)
• Width: 14 HP
• Depth: 22 mm

• 4 Connections for audio in / out modules: 6.3 mm TRS
• MIDI In/Out: USB A and 3.5 mm jack
• Three integrated active 1-to-4 multiple
• Two integrated 2-on-1 precision summers
• 24 Slots for modules
• Internal connectors for Intellijel audio and MIDI modules
• Module installation depth: 45.5 mm
• Power supply specifications: 1.5 A (+ 12 V) / 1.5 A (-12 V) / 500 mA (+ 5V)
• Width: 104 HP)
• Height: 1x 3U, 1x 1U
• Dimensions (W x D x H): 537.7 x 204.4 x 51.3 mm
• Colour: Stealth black
• Includes external 60 W power supply, power cord and MIDI adapter

• Digital reverb
• Lo-Fi-Hall
• Width: 14 TE / HP
• Depth: 45 mm
• Power requirement: +72 mA (+12 V) / -17 mA (-12 V)

• Output of the first multiple is normalised to the input of the second
• Width: 2 HP
• Depth: 39 mm
• Power requirement: +4 mA (+12 V) / -17 mA (-12 V)

• Two independent filters with six modes each
• CV inputs for modulating the cutoff frequency and resonance
• Filters can be switched independently, in series or in parallel and continuously crossfaded with the XFADE controller
• Width: 20 TE / HP
• Depth: 38 mm
• Power requirement: +113 mA (+12 V) / -102 mA (-12 V)

• Responds to the vertical position of the finger and the applied pressure
• Can be configured in different modes
• The selected mode determines which type of signal (CV, note, trigger, gate, etc.) is sent from each of the eight independent outputs
• Multi-colour LEDs for control
• Width: 20 TE / HP
• Depth: 19 mm
• Power requirement: +130 mA (+12 V) / -15 mA (-12 V)