|
|
|
Interface Module
- Interface for balanced line-level (+4 dBu)
- 1x Eurorack signal path to balanced TRS 6.3 mm jack output path
- Width: 10 HP
- Depth: 27 mm
- Power requirement: +9 mA (+12 V) / -9 mA (-12 V)
|
Price History: Intellijel Designs Line Out 1U
36.00 $ |
|
|
|
Passive Configurable Multiple
- Each of the 6 sockets can be switched to X, Y or Off via toggle switch
- Link connector on the rear allows connection to further Switched Mult 1U or XY IO 1U modules
- Width: 14 HP
- Depth: 18 mm
|
Price History: Intellijel Designs Switched Mult 1U
34.00 $ |
|
|
|
Eurorack Module
- Stereo Delay with Reverb
- Digital stereo delay with 3 selectable algorithms: Tape, Bucket Brigade and Crossfading Digital
- Each algorithm with individual sound colouring and reaction to overdrive and modulation
- Maximum delay time: 6s (left channel), 8s (right channel)
- Selectable stereo configurations: Pong, L/R, Time/Width
- Internal modulator with 5 waveforms, random, wow & flutter simulation and envelope follower
- Controls for drive, noise, fog (reverb) and mix - each modulable via assignable aux CV input with bipolar attenuator
- Faders for setting time, width, feedback, modulation rate and depth, colour, high-pass and low-pass filters - each with CV input and bipolar attenuator
- Tap tempo, sync and freeze
- Freeze and clock inputs
- Stereo inputs and outputs
- Modulator CV output
- Power consumption: 116mA (+12V) / 10mA (-12V)
- Width: 20 U
- Depth: 29 mm
|
Price History: Intellijel Designs Sealegs
409.00 $ |
|
|
|
Eurorack Module
- Expander for the Quadrax module (available under Article Nr 477993 (not included))
- Adds an EOR (End Of Rise) and an EOF (End Of Fall) trigger/gate output to each of the Quadrax’s four channels
- Power requirement: 8 mA (+12V) / 0mA (-12V)
- Width: 4 HP
- Depth: 22 mm
|
Price History: Intellijel Designs Qx
71.00 $ |
|
|
|
Semi-Modular Desktop Synthesizer
- 2 analog oscillators
- Each with controls for coarse and fine tuning
- Sync input and 4 waveforms - sine, triangle, sawtooth and square
- VCO A with selectable Through-Zero FM, modulation index VCA and sub-oscillator
- VCO B with switchable LFO mode and selectable pitch CV source
- Noise generator: white noise, pink noise and digital noise with 4 variations
- 6-channel mixer with switchable soft-clipping and normalised to VCO A outputs and ringmodulator
- Line input with gain control for external signals
- Multimode filter with 4 CV inputs and 8 selectable filter modes: 6 dB / 12 dB / 24 dB lowpass, 12 dB / 24 dB bandpass, 24 dB highpass, notch and phaser
- Wavefolder
- VCA A with 2 inputs - normalised to Wavefolder and VCF
- VCA B with selectable Lowpass Gate mode
- Ringmodulator
- Sample & Hold stage
- ADSR envelope generator with 3 selectable time-ranges, hold stage and retrigger input
- Function generator with manual gate button, adjustable response curve and 3 selectable modes (envelope, LFO, burst generator)
- 3-channel triangle LFO
- Slew limiter and envelope follower
- Mixuverter section for mixing, attenuating and inverting signals
- Utility section with multiple, summer, inverter and unipolar/bipolar converter
- Programmable MIDI-CV interface with 8 outputs
- Pitch,gate and trigger inputs for external control sources
- Effects insert with controls for send, return and mix
- Main output with drive-control and switchable soft-clipping
- Line output: 6.3 mm jack, balanced
- Line input: 6.3 mm jack, balanced
- Headphones output: 6.3 mm jack
- Expression output: 6.3 mm jack
- Effects send and return: 6.3mm jack
- MIDI in / out / thru: 5-pin DIN
- USB-C port for USB-MIDI
- Dimensions (WxDxH): 348 x 246 x 66 mm
- Weight: 1.94 kg
- Includes 14 patch cables, USB cable and external power supply
- Fitting Cascadia Rack Ears Kit: 564752 (not included in the delivery)
- Fitting Cascadia Metal Side Cheeks: 564753 (not included in the delivery)
|
Price History: Intellijel Designs Cascadia
1,988.00 $ |
|
|
|
Patch module for Eurorack Cases
- Connects up to 8 audio and CV-/Gate signals between two cases over an RJ45 ethernet cable
- Compatible with Doepfer A-180-9 Multicore Module (Article Nr. 435481), not included
- Passive design
- Sold as a pair of modules
- Dimensions (W x D): 14 HP x 14 mm
- Includes 1m ethernet cable
|
Price History: Intellijel Designs Octalink 1U
120.00 $ |
|
|
|
Voltage Controlled VCA and Mixer
- Volume control per VCA
- CV Attenuator with two-colour LEDs for monitoring bi-polar CV signals
- Curve infinitely adjustable from linear to exponential
- Each CV input is normalized to the adjacent input
- Each VCA has a boost switch that increases the output level by approximately + 6dB
- Width: 12 TE / HP
- Depth: 29 mm
- Power requirement: +65 mA (+12 V) / -65 mA (-12 V)
|
Price History: Intellijel Designs Quad VCA
177.00 $ |
|
|
|
Active Ring Modulator
- With SSI2162 VCA module
- Suitable for audio signals and control voltages
- Current consumption: 25mA (+12V) / 20mA (-12V)
- Width: 6 TE
- Depth: 32 mm
|
Price History: Intellijel Designs Ringmod 1U
88.00 $ |
|
|
|
Eurorack module
- Dual wavefolder with crossfader
- Has 2 channels with "Buchla-style" and "Serge-style" wavefolders, each with CV input and attenuator
- Crossfader with CV input and attenuator
- Can also be used as ring modulator or noise generator
- Internal feedback routing and aux input for external modulation
- Individual outputs per wavefolder and mix output
- Current consumption: 94 mA (+12 V) / 94 mA (-12 V);
- Width: 8 HP
- Depth: 38 mm
|
Price History: Intellijel Designs Bifold
229.00 $ |
|
|
|
Eurorack Module
- 4-Track gate and trigger sequencer
- 1-64 Steps pattern length
- Adjustable gate length
- Clock divider
- Swing
- Delay
- Adjustable step probability
- Track shift
- All parameters are separately adjustable for all 4 tracks
- Real-time and step programming
- Loop mode
- 8 Memory locations
- Width: 8 TE
|
Price History: Intellijel Designs Steppy
222.00 $ |
|
|
|
Eurorack Module
- Expander for the Metropolix (available under Article Nr 514054 (not included))
- Extends the Metropolix sequencer with an extra 8 configurable gate/trigger outputs
- Power requirement: 8 mA (+12 V) / 0 mA (-12 V)
- Width: 4 HP
- Depth: 22 mm
|
Price History: Intellijel Designs Gx
69.00 $ |
|
|
|
Extendable Eurorack Format Audio Mixer
- Inputs 1 and 2 are single-channel mono inputs, each with its own mute switch and level control
- Input 3 is a two-channel stereo input with a common mute and level control
- Input 4 is an additional, non-modifiable stereo input
- Several modules can be connected with bus cables on the back
- Width: 6 HP
- Depth: 29 mm
- Power requirement: +15 mA (+12 V) / -16 mA (-12 V)
|
Price History: Intellijel Designs Mixup
88.00 $ |
|
|
|
Eurorack module
- Output module with balanced stereo output (2x 6.3 mm TRS) and headphone output (6.3 mm TRS)
- Separate volume controls for line and headphone output
- 2x 3.5 mm input with signal LED
- Left input normalized to right input for mono signals
- Link input for mixup module (Article Nr. 440078)
- Current consumption: 37 mA (+12V) / 29 mA (-12V)
- Width: 6 TE
- Depth: 35 mm
|
Price History: Intellijel Designs Outs
149.00 $ |
|
|
|
Eurorack Module
- Adapter to make rear USB ports of modules permanently accessible (e.g. for updates)
- Micro-USB port
- Passive design (does not require power supply)
- Including 3U front panel with 2 passive multiples, 1U front panel, Micro-USB to Micro-USB cable (60cm)
- Width: 2 HP
- Depth (incl. attached cable): 40 mm
|
Price History: Intellijel Designs USB Extender 1U/3U
39.00 $ |
|
|
|
USB Power Module
- Allows the supply of USB devices with 1A
- Compatible with the TPS30 MAX, TPS80, and TPS30MINI bus boards
- Width: 4 HP
|
Price History: Intellijel Designs USB Power 1U
17.80 $ |
|
|
|
Multiple Module
- Dual 1x5 passive
- Width: 14 HP
- Power Requirements: 0 mA
|
Price History: Intellijel Designs Mult 1U
26.00 $ |
|
|
|
Stereo DJ Crossfader and Controller
- Smooth-running Innofader crossfader
- Three selectable crossfader characteristics (DJ cut, constant power, linear)
- Two CV outputs (A & B)
- Switchable from unipolar (0V to +5V) and bipolar (-5V to +5V)
- Stereo and mono operation possible
- Suitable for audio signals and control voltage
- Stereo inputs for A & B and stereo mix output
- Power consumption: 48mA (+12V) / 41mA (-12V)
- Width: 26 U
- Depth: 38 mm
|
Price History: Intellijel Designs Xfade 1U
177.00 $ |
|
|
|
Eurorack Module
- 3-Channel mixer, attenuator, attenuvertor, inverter, multiplier, adder and DC voltage source
- When the input jack is empty, each channel provides 0 V to +5 V or -5 V to +5 V as the voltage source
- Channels A and B can generate 0 V to +10 V or -10 V to +10 V
- Switch for voltage doubling on channel A
- Switch for +5 V offset on channel B
- Mute switch for channel C
- Mix-Out
- Power requirements: 49 mA (+12 V) / 25 mA (-12 V)
- Width: 6 HP
- Depth: 21 mm
|
Price History: Intellijel Designs Triplatt
102.00 $ |
|
|
|
Eurorack Module
- Expander for the Tetrapad by Intellijel (available under Article Nr 440071 (not included))
- Combo mode: Allows you to use the 4 Tetrapad pads as a fader, bipolar fader, crossfader, LFO, switch, or drum pad
- Notes mode: Each pad can be divided into 4, 8, 12 or 16 note values (incl. a selection of different scales and chords)
- Voltage mode: Each pad can be divided into 8, 12 or 16 zones to create control voltages
- Step recording with up to 256 steps
- Real-time performance recorder and looper
- Additional Loopy Performance mode for loopers and sequencers
- Transport functions for controlling other modules
- 3 Assignable CV inputs with bipolar attenuators
- 3 Configurable CV outputs
- Sync all your motions with the internal- or external clock (with adjustable multiplication/divison)
- 99 User presets per mode
- Memory storage via the microSD card (included, 16 GB)
- Power requirement: 120 mA (+12 V) / 6 mA (-12 V)
- Width: 8 HP
- Depth: 39 mm
|
Price History: Intellijel Designs Tete
287.00 $ |
|
|
|
Interface Module
- 6.3 mm TS jack interface expander
- Extension for the Intellijel Designs I/O 1U pedal (Article Nr 440173 - not included, must be ordered as a separate item)
- Width: 8 HP
- Depth: 44 mm
- Power requirement: 0 mA
|
Price History: Intellijel Designs Pedal I/O JACKS 1U
21.40 $ |
