|
|
Active 6.5" Nearfield Monitor
- 3D Imaging waveguide technology for large, imaginary stereo stages
- Bass reflex system
- Boundary EQ to adjust the sound in different studio environments
- Power: 80 W (40 W / 40 W bi-amped)
- Speaker configuration: 6.5" woofer with reduced mass, 1" soft dome tweeter
- Frequency range: 39 - 25,000 Hz
- Crossover frequency: 1300 Hz
- Sound pressure level: 85 dB SPL continuous
- Inputs: XLR, 6.3 mm jack (balanced), Cinch
- Input sensitivity XLR / 6.3 mm jack: +
- 4 dBu
- Input sensitivity RCA: -10 dBV
- Dimensions: 359 x 222 x 260 mm
- Weight: 7.01 kg
- Housing colour: White
|
Price History: Kali Audio LP-6 2nd Wave White
188.00 $ |
|
|
Active Nearfield monitor
- 3-Way system with coaxial midrange / tweeter
- Power: 160 W - 80/40/40 W Tri-Amped
- 5" Bass driver
- 4" Midrange driver
- 1" Soft dome tweeter
- Frequency response: 39 - 25.000 Hz
- Maximum sound level: 112 dB
- EQ for adjustment to the installation location
- Connectors: XLR and jack 6.3 mm balanced as well as RCA unbalanced
- Dimensions (H x W x D): 382 x 286 x 205 mm
- Weight: 8.4 kg
|
Price History: Kali Audio IN-5
289.00 $ |
|
|
Bluetooth receiver
- Sturdy workmanship
- Balanced XLR and 6.3 mm jack stereo output
- Large, non-slip volume controller
- LED meter
- 3.5 mm Aux input
- Dimensions: 138 x 130 x 80 mm
- Weight: 0.5 kg
|
Price History: Kali Audio MV-BT
88.00 $ |
|
|
Active nearfield monitor
- 3-Way system with coaxial midrange/tweeter
- Drivers: 8" woofer, 4" midrange, 1" soft dome tweeter
- Power: 140 Watt (60/40/40 Watt Tri-Amped)
- Frequency range: 37 - 25.000 Hz (-10 dB), 45 - 21.000 Hz (+/- 3 dB)
- Maximum level: 117 dB
- EQ for adjustment to the installation location
- Connectors: XLR and jack 6.3 mm balanced as well as RCA unbalanced
- Dimensions (H x D x W): 441 x 285 x 254 mm
- Weight: 10.4 kg
|
Price History: Kali Audio IN-8 2nd Wave
349.00 $ |
|
|
Kali Audio WS-6.2; Active studio subwoofer; two horizontally opposed 6.5-inch woofers; 120 dB max. SPL; frequency response: 31.5Hz - 180 Hz (+-3dB); footswitch connection: 6.3 mm jack; TRS/XLR combo jack and RCA inputs; XLR outputs with 80 Hz crossover and bypass switch; dimensions(WTH): 368 x 279 x 400 mm; weight: 14 kg
|
Price History: Kali Audio WS-6.2
533.00 $ |
|
|
Active 8" Nearfield Monitor
- 3D Imaging waveguide technology for large, imaginary stereo stages
- Bass reflex system
- Boundary EQ to adjust the sound in different studio environments
- Power: 100 W (60 W / 40 W bi-amped)
- Loudspeaker configuration: 8" woofer with reduced mass, 1" soft dome tweeter
- Frequency range: 37 - 25000 Hz
- Crossover frequency: 1500 Hz
- Sound pressure level: 85 dB SPL continuous
- Inputs: XLR, 6.3 mm jack (balanced), RCA
- Input sensitivity XLR / 6.3 mm jack: +
- 4 dBu
- Input sensitivity RCA: -10 dBV
- Dimensions: 419 x 254 x 286 mm
- Weight: 9 kg
- Housing colour: Black
|
Price History: Kali Audio LP-8 2nd Wave
232.00 $ |
|
|
Kali Audio IN-UNF; Active desktop monitoring system; Class D amplifier; Output power top: 2x60W; Output power subwoofer: 100W; satellite: 4" midrange, 1" textile tweeter; subwoofer: 4,5" long excursion woofer; Frequency range (+-3dB): 47 Hz - 21 kHz; Sound pressure: 85 dB at 0.8m distance; Max SPL: 103 dB; Inputs: USB-C, Toslink, 3.5mm stereo mini jack, 2×6.35mm jack balanced; Trim controls: LF, MR, HF +/- 2dB, LF +4dB; Subwoofer dimensions: 494 x 158 x 133 mm; Satellite diameter: 158 mm; Weight: 11.2 kg; Enclosure color: black
|
Price History: Kali Audio IN-UNF
579.00 $ |
|
|
Active 6.5" Nearfield Monitor
- 3D Imaging waveguide technology for large, imaginary stereo stages
- Bass reflex system
- Boundary EQ to adjust the sound in different studio environments
- Power: 80 W (40 W / 40 W bi-amped)
- Speaker configuration: 6.5" woofer with reduced mass, 1" soft dome tweeter
- Frequency range: 39 - 25,000 Hz
- Crossover frequency: 1300 Hz
- Sound pressure level: 85 dB SPL continuous
- Inputs: XLR, 6.3 mm jack (balanced), Cinch
- Input sensitivity XLR / 6.3 mm jack: +
- 4 dBu
- Input sensitivity RCA: -10 dBV
- Dimensions: 359 x 222 x 260 mm
- Weight: 7.01 kg
- Housing colour: Black
|
Price History: Kali Audio LP-6 2nd Wave
188.00 $ |
|
|
Bundle offer comprising
- Reference for speakers and headphones with measurement microphone (box)
- Speaker and headphone calibration software and measurement microphone in a bundle
- Precise adjustment of the frequency response to get flat and neutral sounding monitor speakers or headphones
- Enables a more precise evaluation of recordings and mixes
- Room analysis and automated calculation of the room size based on several measurements
- Audio calibration engine allows for accurate processing
- Save an unlimited number of calibration profiles for monitor speakers
- Comes with headphone calibration profiles for more than 280 supported models
- Target curve custom adjustments in real time
- Translation check simulates over 20 different devices and device types for accurate mix translation results
- 3 filter modes to choose from: Zero Latency, Mixed and Linear Phase allow to optimize filter quality and latency according to the monitoring situation
- Additional processing controls for Mono, Dry/Wet and Safe Headroom
- App only: MIDI mapping for various controls and user presets for predefined output device/channel pair combinations
- Measurement microphone with a pre-polarized electret-condenser capsule
- Frequency response: 20 - 20.000 Hz with calibration curve
- Omnidirectional polar pattern
- Sensitivity: 14 mV/Pa
- Self noise: 24 dB
- Signal to noise ratio: 70 dB
- Dynamic range: 106dB
- Maximum sound pressure level: 132 dB SPL
- Requires 48 V phantom power
- Connector: 3 pin XLR
- Microphone calibration file for 30° off-axis measurements in Sonarworks software native format to be used with SoundID Reference
- Microphone calibration file for 0° on-axis measurements in .txt format
2x Kali Audio LP-8 2nd Wave
- Active 8" Nearfield Monitor
- 3D Imaging waveguide technology for large, imaginary stereo stages
- Bass reflex system
- Boundary EQ to adjust the sound in different studio environments
- Power: 100 W (60 W / 40 W bi-amped)
- Loudspeaker configuration: 8" woofer with reduced mass, 1" soft dome tweeter
- Frequency range: 37 - 25000 Hz
- Crossover frequency: 1500 Hz
- Sound pressure level: 85 dB SPL continuous
- Inputs: XLR, 6.3 mm jack (balanced), RCA
- Input sensitivity XLR / 6.3 mm jack: +
- 4 dBu
- Input sensitivity RCA: -10 dBV
- Dimensions: 419 x 254 x 286 mm
- Weight: 9 kg
- Housing colour: Black
|
Price History: Kali Audio LP-8 2nd Wave Sonarworks Bdl
699.00 $ |
|
|
Bundle offer comprising
- Reference for speakers and headphones with measurement microphone (box)
- Speaker and headphone calibration software and measurement microphone in a bundle
- Precise adjustment of the frequency response to get flat and neutral sounding monitor speakers or headphones
- Enables a more precise evaluation of recordings and mixes
- Room analysis and automated calculation of the room size based on several measurements
- Audio calibration engine allows for accurate processing
- Save an unlimited number of calibration profiles for monitor speakers
- Comes with headphone calibration profiles for more than 280 supported models
- Target curve custom adjustments in real time
- Translation check simulates over 20 different devices and device types for accurate mix translation results
- 3 filter modes to choose from: Zero Latency, Mixed and Linear Phase allow to optimize filter quality and latency according to the monitoring situation
- Additional processing controls for Mono, Dry/Wet and Safe Headroom
- App only: MIDI mapping for various controls and user presets for predefined output device/channel pair combinations
- Measurement microphone with a pre-polarized electret-condenser capsule
- Frequency response: 20 - 20.000 Hz with calibration curve
- Omnidirectional polar pattern
- Sensitivity: 14 mV/Pa
- Self noise: 24 dB
- Signal to noise ratio: 70 dB
- Dynamic range: 106dB
- Maximum sound pressure level: 132 dB SPL
- Requires 48 V phantom power
- Connector: 3 pin XLR
- Microphone calibration file for 30° off-axis measurements in Sonarworks software native format to be used with SoundID Reference
- Microphone calibration file for 0° on-axis measurements in .txt format
2x Kali Audio LP-6 2nd Wave
- Active 6.5" Nearfield Monitor
- 3D Imaging waveguide technology for large, imaginary stereo stages
- Bass reflex system
- Boundary EQ to adjust the sound in different studio environments
- Power: 80 W (40 W / 40 W bi-amped)
- Speaker configuration: 6.5" woofer with reduced mass, 1" soft dome tweeter
- Frequency range: 39 - 25,000 Hz
- Crossover frequency: 1300 Hz
- Sound pressure level: 85 dB SPL continuous
- Inputs: XLR, 6.3 mm jack (balanced), Cinch
- Input sensitivity XLR / 6.3 mm jack: +
- 4 dBu
- Input sensitivity RCA: -10 dBV
- Dimensions: 359 x 222 x 260 mm
- Weight: 7.01 kg
- Housing colour: Black
|
Price History: Kali Audio LP-6 2nd Wave Sonarworks Bdl
599.00 $ |