Keeley

• High Gain overdrive / distortion
• Emulates the sound of high-gain tube amplifiers
• 3 Gain levels
• 100% Analog
• True bypass
• Level, Presence, Gain, Bass Body and Treble controls
• Boost toggle switch for more gain
• Bright toggle switch for more heights
• Crunch toggle switch for more compression
• Bypass footswitch
• Status LED
• Metal housing
• 6.3 mm Mono jack input / output
• Power supply with 9 V DC power supply (2.1 mm x 5.5 mm barrel connector, polarity (-) inside, not included, battery operation is not supported)
• Power consumption: 10 mA
• Dimensions (L x W x H): 112 x 68 x 51 mm
• Weight: 277 g
• Made in USA

• Overdrive
• Tubular JFET gain stages
• Reissue of the popular Phat Mod
• True bypass
• Controller for Drive Tone and Level
• Toggle switch to toggle between Flat and Fat modes
• Bypass footswitch
• Status LED
• Metal housing
• Input and output: 6.3 mm mono jacks
• Power supply with 9 V battery or via 9 V DC power supply (2.1 mm x 5.5 mm power connection, polarity (-) inside, not included)
• Dimensions (L x W x H): 112 x 68 x 51 mm
• Weight: 277 g
• Made in USA

• Fuzz, phaser, Uni-Vibe, Flanger, Rotary, Delay
• Controls for level (for delay or modulation) Blend / Tape Head Depth / Time, Rate / feedback filter, and Fuzz Level (for Fuzz)
• Toggle switch for switching between "Flange / Rotary", "delay" or "phase / U-Vibe" effects
• Rocker Switch to toggle between "Flat", "Full" or "Scoop" modes
• Order switch for changing the order of fuzz and Mod Section in the signal chain
• True bypass
• Metal casing
• Modulating bypass footswitch
• Modulation status LED
• Fuzz bypass footswitch
• Fuzz Status LED
• 6.3 mm mono-latches the input / output
• 6.3 mm for controlling the expression input RATE
• Powered by 9 V DC power supply (2.1 mm x 5.5 mm barrel connector, polarity (-) inside, not included)
• Power consumption: 75mA
• Dimensions (L x W x H): 99 x 120 x 53 mm
• Weight: 425 g

Note: Cannot be operated with batteries

• Fuzz and reverb
• 3 Reverb modes: Focus / reverse / reverb
• 3 Fuzz modes: Flat / full / scoop
• True bypass
• Fuzz Section Controls for fuzz, filter and level
• Toggle switch to switch between fuzz modes
• Mod Section Knob for blend, decay, warmth and depth
• Toggle switch to toggle between the reverb modes
• Order switch to change the order of fuzz and mod section in the signal chain
• Mod bypass footswitch
• Fuzz bypass footswitch
• Status LEDs
• Metal housing
• 6.3 mm Mono IN / OUT jacks
• 6.3 mm Expression Input for controlling the depth
• Power supply via 9 V DC power supply (2.1 mm x 5.5 mm barrel connector, polarity (-) inside, not included, battery operation is not supported)
• Current consumption> 75 mA
• Dimensions (L x W x H): 99 x 120 x 53 mm
• Weight: 544 g

• Andy Timmons signature pedal
• True stereo delay / echo
• 2 Separate delay sections (A / B)
• 1500 ms max. delay time for each section
• 5 Selectable delay rhythm modes: Quarter Note / Dotted Eighth / Halo / Bucket Brigade (BBD) / Multi-Tap Tape Delay
• 8 Factory presets with new delay and modulation sounds: 4 banks of 2 presets each - Andy Timmons signature 'Halo' sound stored as preset
• DREAM multi-core DSP for pristine sound quality
• Saturate control gives the signal a tape-like saturation and texture
• High pass filter for adjustable bass cut from 0 - 300 Hz
• Tone control for the effect signal
• Soft Stomp footswitch for tap tempo, infinite hold, preset control and more
• Onboard and remote tap tempo possible
• Infinite Hold with maximum feedback
• Remote switching and programmable expression pedal control
• Intuitive alt controls provide full access to additional effect parameters
• Controls for Time/HPF, Level/Saturate, Rate/Tone, Depth/Rhythm, Feedback
• Preset toggle switch
• 2x Footswitches (A / B)
• Status LEDs
• Metal housing
• Switchable between True Bypass or Buffered Trails
• 2 Inputs (true stereo): 6.3 mm mono jack
• 2 Outputs (true stereo): 6.3 mm mono jacks
• Connection for expression pedals and external tap tempo footswitches: 6.3 mm jack (TRS)
• Footswitch connection: 6.3 mm jack (TRS)
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm (negative pole inside)
• Power supply via 9 V DC mains adapter (not included)
• Power consumption: 160 mA
• Dimensions (L x W x H): 120 x 68 x 58 mm
• Weight: approx. 350 g

Note: Battery operation not supported

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years

• True Stereo High-Fidelity Reverb and Tremolo
• 3 Selectable studio quality reverb modes: Spring, Plate, Room
• 3 Selectable tremolo modes with vintage voicing: harmonic, vibrato, sine wave
• Onboard and remote tap tempo
• 3 Footswitchable presets
• Intuitive Alt control options offer full access to additional effect parameters
• Infinite Hold Reverb Trails possible via foot switch
• Expression pedal control can be assigned to each controller
• The order of the effects can be changed as desired
• True bypass or buffered trails (switchable)
• Controls for Rate / Trem Sync, Depth / Trem Level, Dwell / Wet / Dry, Mixer / Reverb Modifier, Colour
• Toggle switch selects Reverb and Tremolo modes
• Reverb bypass footswitch
• Tremolo / Tap Tempo footswitch
• Status LEDs
• 2 x 6.3 mm Mono jack input / output (true stereo)
• 6.3 mm Expression pedal input
• 6.3 mm Input for external foot switch
• Power supply via 9 V DC power supply (2.1 mm x 5.5 mm barrel connector, polarity (-) inside - not included)
• Current consumption 115 mA
• Metal housing
• Dimensions (L x W x H): 120 x 68 x 58 mm
• Weight: approx. 350 g

Note: Battery operation is not supported.

Note: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.

• Combines a Lo-Fi slapback echo, room reverb and double tracker
• A replica of the classic Memphis studio in which Rock'n'Roll was born
• This pedal produces a warm and natural sounding echo and reverb
• Controls: Time, Rain / Mod, Reverb and Mix
• Three switchable modes: ECHO 600 (Echo for Long Delays + Raumhall), SUN mode (AutoTrack duplication and slapback with short delays + room reverb), REVERB (Studio room reverb simulation)
• Operation with power supply (not included, suitable power supply available under Art.409939)
• Power consumption: 65 mA

• High fidelity compression and bass limiting
• Simultaneously musical and very transparent
• Low noise
• Also suitable for active preamplifiers and Line-Level input signals
• Controls: Compression, Threshold, Gain
• Threshold indicator LED
• Power consumption: 15 mA
• Power supply via 9 V battery or 9 V power supply (not included, suitable power supply e.g. article nr 409939)

• Dynamic Flange and Phaser / Random Filter / Sample & Hold
• 3 Modes: Filter, Flange and Phaser
• Controllers for Rate (feedback in Flange mode), Depth (LFO shape in Filter mode), Level and Sens (resonance in Filter mode)
• Toggle switch to select "FILTER", "PHASE" & "FLANGE" mode
• True bypass
• Metal housing
• Status LED
• Bypass footswitch
• 6.3 mm mono jack input/ output
• Power supply via 9 V DC power supply unit (not included, suitable PSU e.g. article nr 409939)
• Current consumption: 65 mA
• Dimensions (L x W x H): 112 x 68 x 51 mm
• Weight: 277 g

Note: Battery operation not possible.

• Rotary RotoFlange Tri-Chorus Rotary Flanger
• True Bypass
• Controls for Rate Depth Texture and Level
• Toggle switch for switching between "Tri-Chorus" "Rotary / Proximity" or "Rotoflange" mode
• Bypass foot switch
• Status LED
• Metal housing
• 6.3 mm mono jack input / output
• Power supply via 9 V DC power supply 2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included), no battery operation possible
• Power consumption 65 mA
• Dimensions (L x W x H): 112 x 68 x 51 mm
• Weight: 277 g
• Made in the USA

• Automatic Double Tracker, Chorus, Vibrato
• Controls for Space, Rate, Depth and Mix
• Toggle switch to toggle between "Dual Chorus", "Seaform" or "ADT" mode
• Internal DIP switch for switching the BASS mode
• Internal DIP switch to selecting between "Vintage" and "Modern" modes
• Metal housing
• True bypass
• Status LED
• Bypass footswitch
• 6.3 mm mono jack input/ output
• Power supply via 9 V power supply unit (not included, suitable power supply e.g. article nr 409939)
• Current consumption: 65 mA
• Dimensions (L x W x H): 112 x 68 x 51 mm
• Weight: 277 g

• Modulated tape echo
• Modulation signal status LED
• Controls for speed, depth, time, rain and level
• Metal housing
• True bypass
• Status LED
• Bypass foot switch
• 6.3 mm Mono jack input/ output
• Power supply via 9 V battery or 9 V power supply (not included, suitable power supply, e.g. Art. 409939)
• Power consumption: 45 mA
• Dimensions (L x W x H): 112 x 68 x 51 mm
• Weight: 277 g

Keeley HALO Andy Timmons Dual Echo (Signature Dual Delay), true stereo delay / echo effects pedal, Andy Timmons signature pedal, 2 separate delay sections (A / B), 1500 ms max. delay time for each section, 5 selectable delay rhythms (Quarter Note / Dotted Eighth / Halo / Bucket Brigade (BBD) / Multi-Tap Tape Delay), 8 factory presets loaded with new delay and modulation sounds (4 banks with 2 presets), Andy Timmons signature 'Halo' sound saved as a preset, Saturate control adds tape compression texture to your tone, High Pass Filter for adjustable bass cut (0 - 300 Hz), Tone control for the delayed signal, soft stomp switches for tap tempo, infinite hold, preset save/recall, and more, remote switching and programmable expression pedal control, DREAM multi-core DSP for stunning sound quality, true bypass or buffered trails (switchable), intuitive Alt control options offer full access to additional effect parameters, onboard and remote tap tempo, infinite hold with maximum feedback, controls for Time / HPF, Level / Saturate, Rate / Tone, Depth / Rhythm, Feedback, preset toggle switch, 2x footswitch (A / B), status LEDs, metal housing, 2x 6.3 mm mono in / output jacks (true stereo), 6.3 mm input (TRS) for expression pedals and external tap tempo footswitches, 6.3 mm input (TRS) for remote switching, power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center, battery operation not supported, current draw 160 mA, dimensions (L x W x H) 120 x 68 x 58 mm, weight ca. 350 g

• 3 Transistor hybrid fuzz
• Combines high-gain silicon and germanium fuzz
• From fat Squarewave to Angular Fuzz and Velcro Attack sounds
• Active 2-band EQ with 2 gyrators
• Up to 20 dB boost / cut at 100 Hz and 10 kHz
• Controls for Fuzz, Bias, Treble, Bass and Level
• Bypass footswitch
• Metal housing
• Status LEDs
• 6.3 mm Mono jack input / output
• Power supply via 9 V DC power supply (2.1 mm x 5.5 mm coaxial connector, polarity (-) inside, not included)
• Current consumption: 15 mA
• Dimensions (L x W x H): 95 x 110 x 50 mm
• Weight: 450 g
• Made in USA

Note: Battery operation is not supported.

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• Compressor
• Parallel compression preserves dynamic peaks and adds sustain
• True bypass
• Controls for Sustain, Level, Blend and Tone
• Single Coil/Humbucker toggle switch to select between 2 Attack/Release settings
• Bypass foot-switch
• Metal housing
• Status LED
• 6.3 mm Mono jack input/ output
• Power supply with 9 V battery or via 9 V DC power supply (2.1 mm x 5.5 mm power connection, polarity (-) inside, not included)
• Power consumption: 10 mA
• Dimensions (L x W x H): 112 x 68 x 51 mm
• Weight: 280 g
• Made in USA

• Delay / Reverb
• Completely revised version of the popular Keeley Caverns Delay / Reverb
• Both effects can be used separately or together
• Switching system mode for the separate implementation of both effects, also with looper switchers
• 3 Reverb modes: shimmer / spring / modulated
• 3 Delay time modulation modes: deep / light / off
• Switchable bypass: true bypass / trails
• Reverb section controls for blend, warmth, decay, and rate
• Delay section controls for time, blend, repeat, rate
• Reverb section toggle switch to select between the different reverb modes
• Delay section toggle switch to select between the different delay time modulation modes
• Reverb footswitch
• Delay footswitch
• Internal delay trails switch to select between true bypass and trails for delay
• Internal reverb trails switch for selecting between true bypass and trails for reverb
• 4 internal DIP switches for activating the switching system mode
• Metal housing
• Status LEDs
• 6.3 mm mono jack input / output
• Power supply via 9V DC power supply (2.1 mm x 5.5 mm, centre negative (-) is not included)
• Current consumption approx. 75 mA
• Dimensions (L x W x H): 120 x 95 x 50 mm
• Weight: 450 g
• Made in the USA

• Compressor / sustainer
• Parallel compression with auto blend improves clarity and definition of notes
• Improved sustain range for even more subtle compression
• New transient release time works equally well with humbuckers or single coils
• Automatic tone recovery circuit clears up treble range during heavy compression
• Integrated preamp for incredible guitar sound
• True bypass
• Level and comp controls
• Bypass footswitch
• Status LED
• Metal housing
• Input and output: 6.3 mm mono jack
• Power supply via optional 9V DC power supply unit, 2.1 x 5.5 mm hollow female plug, polarity (-) inside (not included)
• Power consumption 10 mA
• Dimensions (L x W x H): 95 x 47 x 50 mm
• Weight approx. 140 g

Note: Battery operation not supported

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• Stereo effects pedal
• Offers a range of studio-quality doubling effects to make instruments sound fatter and fuller
• Also included is a reverb that simulates the famous echo chamber in Studio Two of the Abbey Road Studios
• The Keeley 30ms is suitable for guitar, bass, keyboards and also vocals
• Controls: Tuning, time, reverb and level
• Three switchable modes: Dimension, Abbey Mode and Slapback
• Suitable mains adapter: e.g. article nr 409939 (not included)

Note: Battery operation not possible.

• Compressor and Overdrive
• Compressor and overdrive channels can be used separately or together
• Sequence of effects: Switchable
• Switching system mode for separate use of both effects also with looper switches
• True Bypass
• Compressor Section controls for Level, Blend, Sustain and Tone
• Overdrive Section controls for Level Gain and Tone
• FX ORDER Toggle switch to select the order of Overdrive and Drive Section in the signal chain.
• LOW / HIGH toggle switch to select between Low and High Gain modes
• 4 Internal DIP switches to activate Switching System mode
• Compressor foot switch
• Drive foot switch
• Status LEDs
• Metal casing
• 6.3 mm Mono jack input/output
• Power supply via 9 V DC power supply (2.1 mm x 5.5 mm hollow plug, polarity (-) inside, not included)
• Current consumption: 50 mA
• Dimensions (L x W x H): 120 x 95 x 50 mm
• Weight: 350 g
• Made in USA

Note: Battery operation is not supported.

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.