K&K

• Pure Classic pickup
• UltraPure preamp
• Built-in jack
• Hook and loop fastener mounted 9V battery holder

Note: The system has to be installed in the guitar.

• For resonator guitars with Biscuit Bridge
• With pickup to be mounted with a screw
• For maximum sound transmission with minimal feedback susceptibility

Consists of:

• Pure classic pickup

Trinity Microphone

• Integrated 5" gooseneck
• Frequency range from 20 - 20,000 Hz

Trinity Pro Preamp:

• 2-Channel external preamp
• Gain / volume / bass / middle / treble on both channels
• Phase switch for the microphone channel
• Incl. Stereo output jack and stereo cable

Consists of:

Pure classic pickup

Trinity microphone

The Trinity Solo System is an alternative to (or complement for) the Trinity Pro System or the Quantum Blender and supplies power to the microphone. The Trinity Solo can not be operated as a separate system, and for this purpose, K&K recommends the use of their own preamplifiers.

• Integrated 5" gooseneck
• Frequency range from 20 - 20,000 Hz

Note: Preamp is not included

• Preamp for 2x piezo or magnetic pickup
• Internal 3-band EQ for both channels
• 2x Jack inputs
• 1x Jack output
• 2x Volume controls
• Frequency range: 10 - 30,000 Hz
• Input impedance: 1 MOhm
• Output impedance: 3 kOhm
• Power consumption: 3.5 mA

• Possible E-e string distance: 54 - 58 mm
• Height: 1.6 mm
• Width: 2.3 mm
• Cable length approx. 30 cm

Consists of:

Pure mini pickup

Trinity microphone

The Trinity Solo System is an alternative to (or complement for) the Trinity Pro System or the Quantum Blender and supplies power to the microphone. The Trinity Solo can not be operated as a separate system, and for this purpose, K&K recommends the use of their own preamplifiers.

• Integrated 5" gooseneck
• Frequency range from 20-20,000 Hz

• For amplifying a combination of piezo pickup and condenser microphone
• Controls per channel: bass, midrange, treble, gain and volume
• Phase reverse switch for the microphone channel

• Consists of 3 pickups tailored to specific frequency ranges
• Diameter of the pickups: 1x 1.3 cm, 2x 1.9 cm
• Height of the pickups: Approximately 1 mm
• Impedance: High-ohmic
• Output via 6.3 mm jack

• Specially designed for resonator guitars with Spider-Bridge
• The pickup is placed in the resonator funnel directly on the central screw

• The two pickups can be mounted with double-sided adhesive tape
• Multi-use endpin jack
• Cable length: 10"
• Diameter of the transducer: 27 mm
• Input impedance: High ohmic
• Jack: Stereo TRSS with mono output

• For guitars with nylon strings
• Possible E-e string distance: 56 - 60 mm
• Height: 1.6 mm
• Weight: 2.3 mm
• Cable length approx. 30 cm

• Double sensor pickup
• For installing onto the interior of the instrument
• Specially developed for ukuleles

• For steel-string acoustic guitars
• Install inside the instrument
• Gold-coloured strap button with jack output

• Piezoceramic pickup system with two pickups
• Ideal for guitar, saz, oud, bouzouki, balalaika, cello, dulcimer, bongos and many more

• Consists of the Pure pickup, the FanTaStik Western pickup and the PowerMix Pure XT Preamp with 2 x separately adjustable channels
• Bass, midrange and treble controls for both channels
• Internal gain controls for both channels that allow up to 10-times the amplification of the input signals
• Volume controls and 6.3mm jack inputs for both channels
• 6.3 x mm Output jack
• Controls located inside the preamp for gain, bass, midrange and treble, with a signal range of +/- 20 dB
• Internal controls can be adjusted with a screwdriver
• Drilling required on the instrument!

• Double coil magnetic soundhole pickup
• For steel string acoustic guitar
• With switch for phase inversion and switch for tone (bright "gloss" or substantial "steam")
• Works in all presets completely hum-free

• Passive 3-way pickup for steel string acoustic guitars
• With volume control
• Mounts inside the instrument

• For internal pick-up in the instrument
• Specially designed for fan-braced ukuleles
• For mounting the 6.3 mm (1/4'') jack socket a hole is necessary