Meris

• Reverb
• Pedal version of the Meris 500 Series Mercury7
• 2 Reverb algorithms
• Separate controls for interaction of high and low frequencies with the reverb algorithm
• Up to 16 presets via MIDI
• 24 Bit AD/DA with 32 bit floating point DSP
• Selectable bypass (True/Relay Bypass or Buffered)
• Selectable Reverb Trails
• Switchable headroom for guitar/line level input level
• Auto Swell Envelope function
• Analogue signal path
• MIDI in/out/preset selection/external tap tempo available via EXP socket
• Analogue wet/dry mix
• Presets via external 4-preset switch or MIDI selectable
• Space Decay, Modulate, Mix, Lo Frequency, Pitch Vector and Hi Frequency controls
• Alt (Hold) button for activating alternative controller functions
• Algorithm Select button to select the reverb algorithm (Ultraplate/Cathedra)
• Bypass footswitch
• Swell footswitch
• Status LEDs
• Metal housing
• 6.3 mm TRS input jack (switchable stereo/mono)
• 2x 6.3 mm mono jack (L/R) outputs
• 6.3 mm TRS Exp/Tap Tempo/External Footswitch/MIDI jack
• Power supply via 9 V DC power adapter with 2.1 mm x 5.5 mm barrel connector, polarity (-) inside (power adapter not included)
• Current consumption: 150 mA
• Dimensions (L x W x H): 115 x 107 x 67 mm
• Weight: 410 g
• Made in USA

Note: Battery operation is not supported.

Note: Register your product at www.w-distribution.com/Warranty to extend the warranty to 4 years.

• 2 Reverb algorithms
• Separate controls for the interaction of high and low frequencies with the Reverb algorithm
• 24 bit AD / DA with 32 bit floating point DSP
• Switchable headroom for guitar / line level input levels
• Auto Swell Envelope function
• 100% analog bypass
• Analogue wet / dry mix
• Controls for Space Decay, Modulate, Mix, Lo Frequency, Pitch Vector and Hi Frequency
• Alt (Hold) / Algorithm Select button to select between the reverb algorithms (Ultraplate / Cathedra) and activation of the alternative controller functions
• Bypass switch
• Swell switch
• Status LEDs
• Metal housing
• For mounting in racks of the 500 series
• Made in USA

• Delay / Looper
• Modular delay system architecture
• 2540 ms Fully configurable dual delay
• Configurable delay structures and types as well as signal processing elements for fully customisable delay processing
• Intuitive user interface based on a colour display
• True stereo 60-second looper (always available)
• 99 Preset locations in 33 banks
• Favorite Preset Bank for direct access to 3 favourite presets
• Built-in instant access tuner with configurable reference and output mode
• Deep Modifier Section allows routing of control signals to processing parameters
• True stereo processing elements with completely new designs and familiar elements from the Meris family (Polymoon, Hedra, Enzo and Ottobit Jr.)
• Selectable note divisions for each side of the stereo dual delay
• Digitally controlled analogue mix bus
• Switchable input / output headroom level for instrument or line level
• Assignable expression pedal control for multiple parameters simultaneously
• MIDI preset send and receive
• MIDI beat clock synchronisation
• High-quality analogue signal path and JFET input section
• Dimmable screen and logo brightness
• 24-bit A/D and D/A conversion
• 32-bit Floating point DSP
• Sample rate: 48,000 Hz
• Frequency range: 20 - 20,000 Hz
• Selectable true bypass (Relay) or analogue buffered bypass
• Controls for: Time, feedback, mod, mix, control 1, control 2, control 3 (Save)
• 4x LED buttons - preset bypass and tap function for desktop users
• 4x Footswitches - bypass, looper control, tap
• Metal housing
• 2x Inputs: 6.3 mm mono jack (true stereo)
• 2x Outputs: 6.3 mm mono jack (true stereo)
• Expression pedal input: 6.3 mm
• MIDI IN and MIDI THRU connectors: 5-pin DIN
• USB-C connector, only for firmware updates
• Power adapter connector: Hollow female plug 5.5 x 2.1 mm, negative polarity inside
• Power supply via 9 V DC mains adapter is not included in the delivery
• Power consumption: 300 mA
• Dimensions (L x W x H): 184 x 114 x 51 mm
• Weight: 680 g
• Made in the USA

Note: Battery operation not supported.

Note Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• Microphone preamp for recording guitar
• Up to 60 dB gain at the input section
• -27 dB to +12 dB Output Trim
• Post effect grinding path
• Selectable high-pass filter: 80 Hz / 200 Hz
• Selectable high-shelf filter: 7000 Hz / 4000 Hz
• Frequency response: 20 to 2000 Hz flat (all filters deactivated)
• 100% Analog signal path
• Controller for gain and output
• -20 dB Pad toggle switch for high-level input signals
• Phase toggle switch to reverse the signal phase
• +48 V toggle switch to enable phantom power
• High-shelf toggle switch to select the high-shelf filter frequency
• High-pass toggle switch to select the high-pass filter frequency
• Status LED for +48 V phantom power
• Metal housing
• 2 Front-side 6.3 mm mono-pin (send / return) connections
• Return socket can be used as DI input (post filters, pad and phase reversal)
• For mounting in racks of the 500 series
• Made in USANote: Register your product at www.w-distribution.com/Warranty and extend the warranty to 4 years.

• Delay / Looper
• Modular delay system architecture
• 2540 ms Fully configurable dual delay
• Configurable delay structures and types as well as signal processing elements for fully customisable delay processing
• Intuitive user interface based on a colour display
• True stereo 60-second looper (always available)
• 99 Preset locations in 33 banks
• Favorite Preset Bank for direct access to 3 favourite presets
• Built-in instant access tuner with configurable reference and output mode
• Deep Modifier Section allows routing of control signals to processing parameters
• True stereo processing elements with completely new designs and familiar elements from the Meris family (Polymoon, Hedra, Enzo and Ottobit Jr.)
• Selectable note divisions for each side of the stereo dual delay
• Digitally controlled analogue mix bus
• Switchable input / output headroom level for instrument or line level
• Assignable expression pedal control for multiple parameters simultaneously
• MIDI preset send and receive
• MIDI beat clock synchronisation
• High-quality analogue signal path and JFET input section
• Screen and logo brightness dimmable
• 24-bit A/D and D/A conversion
• 32-bit Floating point DSP
• Sample rate: 48,000 Hz
• Frequency range: 20 - 20,000 Hz
• Selectable true bypass (Relay) or analogue buffered bypass
• Controls for: Time, feedback, mod, mix, control 1, control 2, control 3 (Save)
• 4x LED buttons - preset bypass and tap function for desktop users
• 4x Footswitches - bypass, looper control, tap
• Metal housing
• 2x Inputs: 6.3 mm mono jack (true stereo)
• 2x Outputs: 6.3 mm mono jack (true stereo)
• Expression pedal input: 6.3 mm
• MIDI IN and MIDI THRU connectors: 5-pin DIN
• USB-C connector, only for firmware updates
• Power adapter connector: Hollow female plug 5.5 x 2.1 mm, negative polarity inside
• Power supply via 9 V DC mains adapter is not included in the delivery
• Power consumption: 300 mA
• Dimensions (L x W x H): 184 x 114 x 51 mm
• Weight: 680 g
• Made in the USA

Note: Battery operation is not supported.

Note Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• Delay
• 1,200 ms delay time
• Tap Tempo function
• 6 Custom LFO waveforms
• Up to 16 presets via MIDI
• 24 bit AD / DA with 32 bit floating point DSP
• Selectable bypass (True / Relay Bypass or Buffered)
• Selectable delay trails
• Switchable headroom for guitar / line level input level
• Tempo Syncable Stereo Barberpole Phaser
• Dynamic stereo flanger
• Expression control of all effect parameters possible (also simultaneous)
• MIDI in / out / preset selection / external tap tempo available via EXP jack
• Analogue signal path for wet / dry mix
• Presets via external 4-Preset switch or MIDI selectable
• Controls for Time, Feedback, Mix, Multiply, Dimension and Dynamic
• Alt (Hold) button to enable alternative controller functions
• Phaser Select button to select the reverb algorithm (Sync Phase & Slow)
• Bypass footswitch
• Tap footswitch
• Status LEDs
• Metal housing
• 6.3 mm TRS input jack (switchable stereo / mono)
• 2 x 6.3 mm mono latches (L / R) outputs
• 6.3 mm TRS Exp / Tap Tempo / External Footswitch / MIDI Jack
• Power supply via 9 V DC power supply unit with 2.1 x 5.5 mm barrel connector and polarity (-) inside (not included in delivery)
• Current consumption:
• Dimensions (L x W x H): 115 x 107 x 67 mm
• Weight: 410 g
• Made in USA

Note: Battery operation is not supported.

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.